[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240620115951.3awsf7yt66t32buf@skbuf>
Date: Thu, 20 Jun 2024 14:59:51 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Pawel Dembicki <paweldembicki@...il.com>
Cc: netdev@...r.kernel.org, Paolo Abeni <pabeni@...hat.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com, Russell King <linux@...linux.org.uk>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v2 02/12] net: dsa: vsc73xx: Add vlan filtering
On Wed, Jun 19, 2024 at 10:52:08PM +0200, Pawel Dembicki wrote:
> This patch implements VLAN filtering for the vsc73xx driver.
>
> After starting VLAN filtering, the switch is reconfigured from QinQ to
> a simple VLAN aware mode. This is required because VSC73XX chips do not
> support inner VLAN tag filtering.
>
> Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
> ---
> v2:
> - removed not needed INIT_LIST_HEAD
> - fix vsc73xx_vlan removing procedure
> - fix code spell
> - handle return codes from 'vsc73xx_vlan_commit*' functions
> - move 'vsc73xx_vlan_commit*' call from port_setup to port_enable to
> avoid unused port configuration
> v1:
> - refactored pvid, untagged and vlan filter configuration
> - fix typo
> - simplification
Thanks for the changes. This is much simpler for my mind to process.
Hopefully you won't mind a few nitpicks below.
> +static int vsc73xx_set_vlan_conf(struct vsc73xx *vsc, int port,
> + enum vsc73xx_port_vlan_conf port_vlan_conf)
> +{
> + u32 val = 0;
> + int ret;
> +
> + if (port_vlan_conf == VSC73XX_VLAN_IGNORE)
> + val = VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA |
> + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA;
> +
> + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> + VSC73XX_CAT_VLAN_MISC,
> + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA |
> + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA, val);
> + if (ret)
> + return ret;
> +
> + val = (port_vlan_conf == VSC73XX_VLAN_FILTER) ?
> + VSC73XX_TXUPDCFG_TX_INSERT_TAG : 0;
> +
> + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> + VSC73XX_TXUPDCFG,
> + VSC73XX_TXUPDCFG_TX_INSERT_TAG, val);
> +}
> +
> +static int vsc73xx_vlan_commit_conf(struct vsc73xx *vsc, int port)
Could you please add a kernel-doc stating what is the logical input and
output of this routine? Something like:
/**
* vsc73xx_vlan_commit_conf - Update VLAN configuration of a port
* @vsc: Switch private data structure
* @port: Port index on which to operate
*
* Update the VLAN behavior of a port to make sure that when it is under
* a VLAN filtering bridge, the port is either filtering with tag
* preservation, or filtering with all VLANs egress-untagged. Otherwise,
* the port ignores VLAN tags from packets and applies the port-based
* VID.
*
* Must be called when changes are made to:
* - the bridge VLAN filtering state of the port
* - the number or attributes of VLANs from the bridge VLAN table,
* while the port is currently VLAN-aware
*/
> +{
> + enum vsc73xx_port_vlan_conf port_vlan_conf = VSC73XX_VLAN_IGNORE;
> + struct dsa_port *dp = dsa_to_port(vsc->ds, port);
> +
> + if (port == CPU_PORT) {
> + port_vlan_conf = VSC73XX_VLAN_FILTER;
> + } else if (dsa_port_is_vlan_filtering(dp)) {
> + struct vsc73xx_vlan_summary summary;
> +
> + port_vlan_conf = VSC73XX_VLAN_FILTER;
> +
> + vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID);
> + if (summary.num_tagged == 0)
> + port_vlan_conf = VSC73XX_VLAN_FILTER_UNTAG_ALL;
> + }
> +
> + return vsc73xx_set_vlan_conf(vsc, port, port_vlan_conf);
> +}
> +
> +static int
> +vsc73xx_vlan_change_untagged(struct vsc73xx *vsc, int port, u16 vid, bool set)
> +{
> + u32 val = 0;
> +
> + if (set)
> + val = VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA |
> + ((vid << VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT) &
> + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID);
> +
> + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> + VSC73XX_TXUPDCFG,
> + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA |
> + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID, val);
> +}
> +
> +static int vsc73xx_vlan_commit_untagged(struct vsc73xx *vsc, int port)
/**
* vsc73xx_vlan_commit_untagged - Update native VLAN of a port
* @vsc: Switch private data structure
* @port: Port index on which to operate
*
* Update the native VLAN of a port (the one VLAN which is transmitted
* as egress-tagged on a trunk port).
*
* TODO: I need to figure out more about the implementation :)
*/
> +{
> + struct vsc73xx_portinfo *portinfo = &vsc->portinfo[port];
> + bool valid = portinfo->untagged_tag_8021q_configured;
> + struct dsa_port *dp = dsa_to_port(vsc->ds, port);
> + u16 vid = portinfo->untagged_tag_8021q;
Question: when tag_8021q is active and the port is VSC73XX_VLAN_IGNORE,
does the untagged_tag_8021q VID matter at all?
> +
> + if (dsa_port_is_vlan_filtering(dp)) {
If not, wouldn't it be better to just return early and do nothing
if !dsa_port_is_vlan_filtering(dp)?
> + struct vsc73xx_vlan_summary summary;
> +
> + vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID);
> +
> + if (summary.num_untagged > 1)
> + /* Port must untag all vlans in that case.
> + * No need to commit untagged config change.
> + */
> + return 0;
> +
> + valid = (summary.num_untagged == 1);
> + if (valid)
> + vid = vsc73xx_find_first_vlan_untagged(vsc, port);
> + }
> +
> + return vsc73xx_vlan_change_untagged(vsc, port, vid, valid);
> +}
> +
> +static int
> +vsc73xx_vlan_change_pvid(struct vsc73xx *vsc, int port, u16 vid, bool set)
> +{
> + u32 val = 0;
> + int ret;
> +
> + val = set ? 0 : VSC73XX_CAT_DROP_UNTAGGED_ENA;
> +
> + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> + VSC73XX_CAT_DROP,
> + VSC73XX_CAT_DROP_UNTAGGED_ENA, val);
> + if (!set || ret)
> + return ret;
> +
> + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
> + VSC73XX_CAT_PORT_VLAN,
> + VSC73XX_CAT_PORT_VLAN_VLAN_VID,
> + vid & VSC73XX_CAT_PORT_VLAN_VLAN_VID);
> +}
> +
/**
* vsc73xx_vlan_commit_pvid - Update port-based default VLAN of a port
* @vsc: Switch private data structure
* @port: Port index on which to operate
*
* Update the PVID of a port so that it follows either the bridge PVID
* configuration, when the bridge is currently VLAN-aware, or the PVID
* from tag_8021q, when the port is standalone or under a VLAN-unaware
* bridge. A port with no PVID drops all untagged and VID 0 tagged
* traffic.
*
* Must be called when changes are made to:
* - the bridge VLAN filtering state of the port
* - the number or attributes of VLANs from the bridge VLAN table,
* while the port is currently VLAN-aware
*/
> +static int vsc73xx_vlan_commit_pvid(struct vsc73xx *vsc, int port)
> +{
> + struct vsc73xx_portinfo *portinfo = &vsc->portinfo[port];
> + bool valid = portinfo->pvid_tag_8021q_configured;
> + struct dsa_port *dp = dsa_to_port(vsc->ds, port);
> + u16 vid = portinfo->pvid_tag_8021q;
> +
> + if (dsa_port_is_vlan_filtering(dp)) {
> + vid = portinfo->pvid_vlan_filtering;
> + valid = portinfo->pvid_vlan_filtering_configured;
> + }
> +
> + return vsc73xx_vlan_change_pvid(vsc, port, vid, valid);
> +}
> +
> static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
> struct phy_device *phy)
> {
> struct vsc73xx *vsc = ds->priv;
> + int ret;
>
> dev_info(vsc->dev, "enable port %d\n", port);
> vsc73xx_init_port(vsc, port);
>
> - return 0;
> + ret = vsc73xx_vlan_commit_untagged(vsc, port);
> + if (ret)
> + return ret;
> +
> + ret = vsc73xx_vlan_commit_pvid(vsc, port);
> + if (ret)
> + return ret;
> +
> + return vsc73xx_vlan_commit_conf(vsc, port);
> }
>
> static void vsc73xx_port_disable(struct dsa_switch *ds, int port)
> @@ -1032,6 +1361,184 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
> config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
> }
>
> +static int
> +vsc73xx_port_vlan_filtering(struct dsa_switch *ds, int port,
> + bool vlan_filtering, struct netlink_ext_ack *extack)
> +{
> + struct vsc73xx *vsc = ds->priv;
> + int ret;
> +
> + /* The commit to hardware processed below is required because vsc73xx
> + * is using tag_8021q. When vlan_filtering is disabled, tag_8021q uses
> + * pvid/untagged vlans for port recognition. The values configured for
> + * vlans and pvid/untagged states are stored in portinfo structure.
> + * When vlan_filtering is enabled, we need to restore pvid/untagged from
> + * portinfo structure. Analogous routine is processed when
> + * vlan_filtering is disabled, but values used for tag_8021q are
> + * restored.
> + */
> + ret = vsc73xx_vlan_commit_untagged(vsc, port);
> + if (ret)
> + return ret;
> +
> + ret = vsc73xx_vlan_commit_pvid(vsc, port);
> + if (ret)
> + return ret;
> +
> + return vsc73xx_vlan_commit_conf(vsc, port);
Could you please group these 3 calls together in a separate subroutine,
like vsc73xx_port_update_vlan(), and just call that? The pattern is
repeated in a number of places.
> +}
> +
> +static int vsc73xx_port_vlan_add(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan,
> + struct netlink_ext_ack *extack)
> +{
> + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> + struct dsa_port *dp = dsa_to_port(ds, port);
> + struct vsc73xx_bridge_vlan *vsc73xx_vlan;
> + struct vsc73xx_vlan_summary summary;
> + struct vsc73xx_portinfo *portinfo;
> + struct vsc73xx *vsc = ds->priv;
> + bool commit_to_hardware;
> + int ret = 0;
> +
> + /* Be sure to deny alterations to the configuration done by tag_8021q.
> + */
> + if (vid_is_dsa_8021q(vlan->vid)) {
> + NL_SET_ERR_MSG_MOD(extack,
> + "Range 3072-4095 reserved for dsa_8021q operation");
> + return -EBUSY;
> + }
> +
> + /* The processed vlan->vid is excluded from the search because the VLAN
> + * can be re-added with a different set of flags, so it's easiest to
> + * ignore its old flags from the VLAN database software copy.
> + */
> + vsc73xx_bridge_vlan_summary(vsc, port, &summary, vlan->vid);
> +
> + /* VSC73XX allow only three untagged states: none, one or all */
allows
> + if ((untagged && summary.num_tagged > 0 && summary.num_untagged > 0) ||
> + (!untagged && summary.num_untagged > 1)) {
> + NL_SET_ERR_MSG_MOD(extack,
> + "Port can have only none, one or all untagged vlan");
> + return -EBUSY;
> + }
> +
> + vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid);
> +
> + if (!vsc73xx_vlan) {
> + vsc73xx_vlan = kzalloc(sizeof(*vsc73xx_vlan), GFP_KERNEL);
> + if (!vsc73xx_vlan)
> + return -ENOMEM;
> +
> + vsc73xx_vlan->vid = vlan->vid;
> + vsc73xx_vlan->portmask = 0;
> + vsc73xx_vlan->untagged = 0;
kzalloc gives you 0-initialized memory, so "portmask" and "untagged" are
already 0.
> +
> + list_add_tail(&vsc73xx_vlan->list, &vsc->vlans);
> + }
> +
> + /* CPU port must be always tagged because port separation is based on
> + * tag_8021q.
I would say "source port identification" rather than separation.
> + */
> + if (port == CPU_PORT)
> + goto update_vlan_table;
> +
> + vsc73xx_vlan->portmask |= BIT(port);
> +
> + if (untagged)
> + vsc73xx_vlan->untagged |= BIT(port);
> + else
> + vsc73xx_vlan->untagged &= ~BIT(port);
> +
> + portinfo = &vsc->portinfo[port];
> +
> + if (pvid) {
> + portinfo->pvid_vlan_filtering_configured = true;
> + portinfo->pvid_vlan_filtering = vlan->vid;
> + } else if (portinfo->pvid_vlan_filtering_configured &&
> + portinfo->pvid_vlan_filtering == vlan->vid) {
> + portinfo->pvid_vlan_filtering_configured = false;
> + }
> +
> + commit_to_hardware = !vsc73xx_tag_8021q_active(dp);
> + if (commit_to_hardware) {
> + ret = vsc73xx_vlan_commit_untagged(vsc, port);
> + if (ret)
> + goto err;
> +
> + ret = vsc73xx_vlan_commit_pvid(vsc, port);
> + if (ret)
> + goto err;
> +
> + ret = vsc73xx_vlan_commit_conf(vsc, port);
> + if (ret)
> + goto err;
> + }
> +
> +update_vlan_table:
> + ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, true);
> + if (!ret)
> + return 0;
> +err:
> + vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port);
> + return ret;
> +}
> +
> +static int vsc73xx_port_vlan_del(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + struct vsc73xx_bridge_vlan *vsc73xx_vlan;
> + struct vsc73xx_portinfo *portinfo;
> + struct vsc73xx *vsc = ds->priv;
> + bool commit_to_hardware;
> + int ret;
> +
> + ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, false);
> + if (ret)
> + return ret;
> +
> + portinfo = &vsc->portinfo[port];
> +
> + if (portinfo->pvid_vlan_filtering_configured &&
> + portinfo->pvid_vlan_filtering == vlan->vid)
> + portinfo->pvid_vlan_filtering_configured = false;
> +
> + vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid);
> +
> + if (vsc73xx_vlan)
> + vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port);
> +
> + commit_to_hardware = !vsc73xx_tag_8021q_active(dsa_to_port(ds, port));
> + if (commit_to_hardware) {
> + ret = vsc73xx_vlan_commit_untagged(vsc, port);
> + if (ret)
> + return ret;
> +
> + ret = vsc73xx_vlan_commit_pvid(vsc, port);
> + if (ret)
> + return ret;
> +
> + return vsc73xx_vlan_commit_conf(vsc, port);
> + }
> +
> + return 0;
> +}
> +
> +static int vsc73xx_port_setup(struct dsa_switch *ds, int port)
> +{
> + struct vsc73xx_portinfo *portinfo;
> + struct vsc73xx *vsc = ds->priv;
> +
> + portinfo = &vsc->portinfo[port];
> +
> + portinfo->pvid_vlan_filtering_configured = false;
> + portinfo->pvid_tag_8021q_configured = false;
> + portinfo->untagged_tag_8021q_configured = false;
Initialization with 0, false etc isn't really needed. Not worth adding a
DSA callback for no useful action.
> +
> + return 0;
> +}
> +
> static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state)
> {
> struct dsa_port *other_dp, *dp = dsa_to_port(ds, port);
> @@ -1126,11 +1633,15 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
> .get_strings = vsc73xx_get_strings,
> .get_ethtool_stats = vsc73xx_get_ethtool_stats,
> .get_sset_count = vsc73xx_get_sset_count,
> + .port_setup = vsc73xx_port_setup,
> .port_enable = vsc73xx_port_enable,
> .port_disable = vsc73xx_port_disable,
> .port_change_mtu = vsc73xx_change_mtu,
> .port_max_mtu = vsc73xx_get_max_mtu,
> .port_stp_state_set = vsc73xx_port_stp_state_set,
> + .port_vlan_filtering = vsc73xx_port_vlan_filtering,
> + .port_vlan_add = vsc73xx_port_vlan_add,
> + .port_vlan_del = vsc73xx_port_vlan_del,
> .phylink_get_caps = vsc73xx_phylink_get_caps,
> };
>
> diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
> index 2997f7e108b1..3c7586868e1b 100644
> --- a/drivers/net/dsa/vitesse-vsc73xx.h
> +++ b/drivers/net/dsa/vitesse-vsc73xx.h
> @@ -14,6 +14,27 @@
> */
> #define VSC73XX_MAX_NUM_PORTS 8
>
> +/**
> + * struct vsc73xx_portinfo - port data structure: contains storage data
> + * @pvid_vlan_filtering_configured: imforms if port have configured pvid in vlan
> + * filtering mode
> + * @pvid_vlan_filtering: pvid vlan number used in vlan filtering mode
> + * @pvid_tag_8021q_configured: imforms if port have configured pvid in tag_8021q
> + * mode
> + * @pvid_tag_8021q: pvid vlan number used in tag_8021q mode
> + * @untagged_tag_8021q_configured: imforms if port have configured untagged vlan
> + * in tag_8021q mode
> + * @untagged_tag_8021q: untagged vlan number used in tag_8021q mode
> + */
s/imforms/informs/
s/port have/port has/
> +struct vsc73xx_portinfo {
> + bool pvid_vlan_filtering_configured;
> + u16 pvid_vlan_filtering;
> + bool pvid_tag_8021q_configured;
> + u16 pvid_tag_8021q;
> + bool untagged_tag_8021q_configured;
> + u16 untagged_tag_8021q;
> +};
> +
I think it may be more economical to put all u16 elements first, then
all bool elements. Pahole should be able to tell.
> /**
> * struct vsc73xx - VSC73xx state container: main data structure
> * @dev: The device pointer
> @@ -25,6 +46,10 @@
> * @addr: MAC address used in flow control frames
> * @ops: Structure with hardware-dependent operations
> * @priv: Pointer to the configuration interface structure
> + * @portinfo: Storage table portinfo structructures
> + * @vlans: List of configured vlans. Contains port mask and untagged status of
> + * every vlan configured in port vlan operation. It doesn't cover tag_8021q
> + * vlans.
> */
> struct vsc73xx {
> struct device *dev;
> @@ -35,6 +60,8 @@ struct vsc73xx {
> u8 addr[ETH_ALEN];
> const struct vsc73xx_ops *ops;
> void *priv;
> + struct vsc73xx_portinfo portinfo[VSC73XX_MAX_NUM_PORTS];
> + struct list_head vlans;
> };
>
> /**
> @@ -49,6 +76,21 @@ struct vsc73xx_ops {
> u32 val);
> };
>
> +/**
> + * struct vsc73xx_bridge_vlan - VSC73xx driver structure which keeps vlan
> + * database copy
> + * @vid: VLAN number
> + * @portmask: each bit represents one port
> + * @untagged: each bit represents one port configured with @vid untagged
> + * @list: list structure
> + */
> +struct vsc73xx_bridge_vlan {
> + u16 vid;
> + u8 portmask;
> + u8 untagged;
> + struct list_head list;
> +};
> +
> int vsc73xx_is_addr_valid(u8 block, u8 subblock);
> int vsc73xx_probe(struct vsc73xx *vsc);
> void vsc73xx_remove(struct vsc73xx *vsc);
> --
> 2.34.1
>
Powered by blists - more mailing lists