| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Jun 2024 06:07:24 -0400
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Jason Wang <jasowang@...hat.com>
Cc: xuanzhuo@...ux.alibaba.com, eperezma@...hat.com, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
virtualization@...ts.linux.dev, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, venkat.x.venkatsubra@...cle.com,
gia-khanh.nguyen@...cle.com
Subject: Re: [PATCH V2 3/3] virtio-net: synchronize operstate with admin
state on up/down
On Mon, Jun 24, 2024 at 10:45:23AM +0800, Jason Wang wrote:
> This patch synchronize operstate with admin state per RFC2863.
>
> This is done by trying to toggle the carrier upon open/close and
> synchronize with the config change work. This allows propagate status
> correctly to stacked devices like:
>
> ip link add link enp0s3 macvlan0 type macvlan
> ip link set link enp0s3 down
> ip link show
>
> Before this patch:
>
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ......
> 5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
> link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
>
> After this patch:
>
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ...
> 5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
> link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
>
> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
> Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
> Signed-off-by: Jason Wang <jasowang@...hat.com>
> ---
> drivers/net/virtio_net.c | 72 +++++++++++++++++++++++-----------------
> 1 file changed, 42 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index b1f8b720733e..eff3ad3d6bcc 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -2468,6 +2468,25 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)
> return err;
> }
>
> +static void virtnet_update_settings(struct virtnet_info *vi)
> +{
> + u32 speed;
> + u8 duplex;
> +
> + if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> + return;
> +
> + virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> +
> + if (ethtool_validate_speed(speed))
> + vi->speed = speed;
> +
> + virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> +
> + if (ethtool_validate_duplex(duplex))
> + vi->duplex = duplex;
> +}
> +
> static int virtnet_open(struct net_device *dev)
> {
> struct virtnet_info *vi = netdev_priv(dev);
> @@ -2486,6 +2505,22 @@ static int virtnet_open(struct net_device *dev)
> goto err_enable_qp;
> }
>
> + /* Assume link up if device can't report link status,
> + otherwise get link status from config. */
> + netif_carrier_off(dev);
> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> + virtio_config_enable(vi->vdev);
> + /* We are not sure if config interrupt is disabled by
> + * core or not, so we can't schedule config_work by
> + * ourselves.
> + */
This comment confuses more than it explains.
You seem to be arguing about some alternative design
you had in mind, but readers don't have it in mind.
Please just explain what this does and why.
For what: something like "Trigger re-read of config - same
as we'd do if config changed".
Now, please do what you don't do here: explain the why:
why do we want all these VM
exits on each open/close as opposed to once on probe and later on
config changed interrupt.
> + virtio_config_changed(vi->vdev);
> + } else {
> + vi->status = VIRTIO_NET_S_LINK_UP;
> + virtnet_update_settings(vi);
> + netif_carrier_on(dev);
> + }
> +
> return 0;
>
> err_enable_qp:
> @@ -2928,12 +2963,19 @@ static int virtnet_close(struct net_device *dev)
> disable_delayed_refill(vi);
> /* Make sure refill_work doesn't re-enable napi! */
> cancel_delayed_work_sync(&vi->refill);
> + /* Make sure config notification doesn't schedule config work */
> + virtio_config_disable(vi->vdev);
> + /* Make sure status updating is cancelled */
> + cancel_work_sync(&vi->config_work);
>
> for (i = 0; i < vi->max_queue_pairs; i++) {
> virtnet_disable_queue_pair(vi, i);
> cancel_work_sync(&vi->rq[i].dim.work);
> }
>
> + vi->status &= ~VIRTIO_NET_S_LINK_UP;
> + netif_carrier_off(dev);
> +
> return 0;
> }
>
> @@ -4632,25 +4674,6 @@ static void virtnet_init_settings(struct net_device *dev)
> vi->duplex = DUPLEX_UNKNOWN;
> }
>
> -static void virtnet_update_settings(struct virtnet_info *vi)
> -{
> - u32 speed;
> - u8 duplex;
> -
> - if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> - return;
> -
> - virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> -
> - if (ethtool_validate_speed(speed))
> - vi->speed = speed;
> -
> - virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> -
> - if (ethtool_validate_duplex(duplex))
> - vi->duplex = duplex;
> -}
> -
> static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
> {
> return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
> @@ -5958,17 +5981,6 @@ static int virtnet_probe(struct virtio_device *vdev)
> goto free_unregister_netdev;
> }
>
> - /* Assume link up if device can't report link status,
> - otherwise get link status from config. */
> - netif_carrier_off(dev);
> - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> - schedule_work(&vi->config_work);
> - } else {
> - vi->status = VIRTIO_NET_S_LINK_UP;
> - virtnet_update_settings(vi);
> - netif_carrier_on(dev);
> - }
> -
> for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
> if (virtio_has_feature(vi->vdev, guest_offloads[i]))
> set_bit(guest_offloads[i], &vi->guest_offloads);
> --
> 2.31.1
Powered by blists - more mailing lists