| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 26 Jun 2024 12:23:07 -0400
From: Frank Li <Frank.Li@....com>
To: krzk@...nel.org
Cc: Frank.Li@....com,
conor+dt@...nel.org,
davem@...emloft.net,
devicetree@...r.kernel.org,
edumazet@...gle.com,
imx@...ts.linux.dev,
krzk+dt@...nel.org,
kuba@...nel.org,
linux-kernel@...r.kernel.org,
netdev@...r.kernel.org,
pabeni@...hat.com,
robh@...nel.org
Subject: [PATCH v2 1/1] dt-bindings: net: convert enetc to yaml
Convert enetc device binding file to yaml. Split to 3 yaml files,
'fsl,enetc.yaml', 'fsl,enetc-mdio.yaml', 'fsl,enetc-ierb.yaml'.
Additional Changes:
- Add pci<vendor id>,<production id> in compatible string.
- Ref to common ethernet-controller.yaml and mdio.yaml.
- Remove fixed-link part.
Signed-off-by: Frank Li <Frank.Li@....com>
---
Change from v1 to v2
- renamee file as fsl,enetc-mdio.yaml, fsl,enetc-ierb.yaml, fsl,enetc.yaml
- example include pcie node
---
.../bindings/net/fsl,enetc-ierb.yaml | 35 ++++++
.../bindings/net/fsl,enetc-mdio.yaml | 53 ++++++++
.../devicetree/bindings/net/fsl,enetc.yaml | 50 ++++++++
.../devicetree/bindings/net/fsl-enetc.txt | 119 ------------------
4 files changed, 138 insertions(+), 119 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml
create mode 100644 Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
create mode 100644 Documentation/devicetree/bindings/net/fsl,enetc.yaml
delete mode 100644 Documentation/devicetree/bindings/net/fsl-enetc.txt
diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml
new file mode 100644
index 0000000000000..ce88d7ce07a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,enetc-ierb.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-ierb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Endpoint Register Block
+
+description:
+ The fsl_enetc driver can probe on the Integrated Endpoint Register
+ Block, which preconfigures the FIFO limits for the ENETC ports.
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1028a-enetc-ierb
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ ierb@...800000 {
+ compatible = "fsl,ls1028a-enetc-ierb";
+ reg = <0xf0800000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
new file mode 100644
index 0000000000000..60740ea56cb08
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENETC the central MDIO PCIe endpoint device
+
+description:
+ In this case, the mdio node should be defined as another PCIe
+ endpoint node, at the same level with the ENETC port nodes
+
+maintainers:
+ - Frank Li <Frank.Li@....com>.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - pci1957,ee01
+ - const: fsl,enetc-mdio
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: mdio.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie@...000000 {
+ compatible = "pci-host-ecam-generic";
+ reg = <0x01 0xf0000000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ mdio@0,3 {
+ compatible = "pci1957,ee01", "fsl,enetc-mdio";
+ reg = <0x000300 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
new file mode 100644
index 0000000000000..843c27e357f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENETC ethernet
+
+description:
+ Depending on board design and ENETC port type (internal or
+ external) there are two supported link modes specified by
+ below device tree bindings.
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - pci1957,e100
+ - const: fsl,enetc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie@...000000 {
+ compatible = "pci-host-ecam-generic";
+ reg = <0x01 0xf0000000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ethernet@0,0 {
+ compatible = "pci1957,e100", "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
deleted file mode 100644
index 9b9a3f197e2d3..0000000000000
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-* ENETC ethernet device tree bindings
-
-Depending on board design and ENETC port type (internal or
-external) there are two supported link modes specified by
-below device tree bindings.
-
-Required properties:
-
-- reg : Specifies PCIe Device Number and Function
- Number of the ENETC endpoint device, according
- to parent node bindings.
-- compatible : Should be "fsl,enetc".
-
-1. The ENETC external port is connected to a MDIO configurable phy
-
-1.1. Using the local ENETC Port MDIO interface
-
-In this case, the ENETC node should include a "mdio" sub-node
-that in turn should contain the "ethernet-phy" node describing the
-external phy. Below properties are required, their bindings
-already defined in Documentation/devicetree/bindings/net/ethernet.txt or
-Documentation/devicetree/bindings/net/phy.txt.
-
-Required:
-
-- phy-handle : Phandle to a PHY on the MDIO bus.
- Defined in ethernet.txt.
-
-- phy-connection-type : Defined in ethernet.txt.
-
-- mdio : "mdio" node, defined in mdio.txt.
-
-- ethernet-phy : "ethernet-phy" node, defined in phy.txt.
-
-Example:
-
- ethernet@0,0 {
- compatible = "fsl,enetc";
- reg = <0x000000 0 0 0 0>;
- phy-handle = <&sgmii_phy0>;
- phy-connection-type = "sgmii";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
- };
- };
-
-1.2. Using the central MDIO PCIe endpoint device
-
-In this case, the mdio node should be defined as another PCIe
-endpoint node, at the same level with the ENETC port nodes.
-
-Required properties:
-
-- reg : Specifies PCIe Device Number and Function
- Number of the ENETC endpoint device, according
- to parent node bindings.
-- compatible : Should be "fsl,enetc-mdio".
-
-The remaining required mdio bus properties are standard, their bindings
-already defined in Documentation/devicetree/bindings/net/mdio.txt.
-
-Example:
-
- ethernet@0,0 {
- compatible = "fsl,enetc";
- reg = <0x000000 0 0 0 0>;
- phy-handle = <&sgmii_phy0>;
- phy-connection-type = "sgmii";
- };
-
- mdio@0,3 {
- compatible = "fsl,enetc-mdio";
- reg = <0x000300 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
- };
-
-2. The ENETC port is an internal port or has a fixed-link external
-connection
-
-In this case, the ENETC port node defines a fixed link connection,
-as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
-
-Required:
-
-- fixed-link : "fixed-link" node, defined in "fixed-link.txt".
-
-Example:
- ethernet@0,2 {
- compatible = "fsl,enetc";
- reg = <0x000200 0 0 0 0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
-* Integrated Endpoint Register Block bindings
-
-Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
-Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
-with the following properties:
-
-- reg : Specifies the address in the SoC memory space.
-- compatible : Must be "fsl,ls1028a-enetc-ierb".
-
-Example:
- ierb@...800000 {
- compatible = "fsl,ls1028a-enetc-ierb";
- reg = <0x01 0xf0800000 0x0 0x10000>;
- };
--
2.34.1
Powered by blists - more mailing lists