[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <06fbe94a8526cc770fa19bb30ade85c9534f1e8d.1719497773.git.petrm@nvidia.com>
Date: Thu, 27 Jun 2024 16:48:41 +0200
From: Petr Machata <petrm@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
<pabeni@...hat.com>, <netdev@...r.kernel.org>
CC: Danielle Ratson <danieller@...dia.com>, Petr Machata <petrm@...dia.com>,
Ido Schimmel <idosch@...dia.com>, Hangbin Liu <liuhangbin@...il.com>,
Benjamin Poirier <bpoirier@...dia.com>, Shuah Khan <shuah@...nel.org>,
<linux-kselftest@...r.kernel.org>, Simon Horman <horms@...nel.org>,
<mlxsw@...dia.com>
Subject: [PATCH net-next 04/12] selftests: mirror_gre_lag_lacp: Check counters at tunnel
The test works by sending packets through a tunnel, whence they are
forwarded to a LAG. One of the LAG children is removed from the LAG prior
to the exercise, and the test then counts how many packets pass through the
other one. The issue with this is that it counts all packets, not just the
encapsulated ones.
So instead add a second gretap endpoint to receive the sent packets, and
check reception counters there.
Signed-off-by: Petr Machata <petrm@...dia.com>
Reviewed-by: Danielle Ratson <danieller@...dia.com>
---
.../net/forwarding/mirror_gre_lag_lacp.sh | 37 +++++++++++--------
1 file changed, 22 insertions(+), 15 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
index 9edf4cb104a8..f521648682bf 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -37,8 +37,14 @@
# | \ / |
# | \____________________________________________/ |
# | | |
-# | + lag2 (team) |
-# | 192.0.2.130/28 |
+# | + lag2 (team) ------> + gt4-dst (gretap) |
+# | 192.0.2.130/28 loc=192.0.2.130 |
+# | rem=192.0.2.129 |
+# | ttl=100 |
+# | tos=inherit |
+# | |
+# | |
+# | |
# | |
# +---------------------------------------------------------------------------+
@@ -122,16 +128,21 @@ h3_create()
{
vrf_create vrf-h3
ip link set dev vrf-h3 up
- tc qdisc add dev $h3 clsact
- tc qdisc add dev $h4 clsact
h3_create_team
+
+ tunnel_create gt4-dst gretap 192.0.2.130 192.0.2.129 \
+ ttl 100 tos inherit
+ ip link set dev gt4-dst master vrf-h3
+ tc qdisc add dev gt4-dst clsact
}
h3_destroy()
{
+ tc qdisc del dev gt4-dst clsact
+ ip link set dev gt4-dst nomaster
+ tunnel_destroy gt4-dst
+
h3_destroy_team
- tc qdisc del dev $h4 clsact
- tc qdisc del dev $h3 clsact
ip link set dev vrf-h3 down
vrf_destroy vrf-h3
}
@@ -188,18 +199,12 @@ setup_prepare()
h2_create
h3_create
switch_create
-
- trap_install $h3 ingress
- trap_install $h4 ingress
}
cleanup()
{
pre_cleanup
- trap_uninstall $h4 ingress
- trap_uninstall $h3 ingress
-
switch_destroy
h3_destroy
h2_destroy
@@ -219,6 +224,7 @@ test_lag_slave()
mirror_install $swp1 ingress gt4 \
"proto 802.1q flower vlan_id 333 $tcflags"
+ vlan_capture_install gt4-dst "vlan_ethtype ipv4 ip_proto icmp type 8"
# Move $down_dev away from the team. That will prompt change in
# txability of the connected device, without changing its upness. The
@@ -226,13 +232,14 @@ test_lag_slave()
# other slave.
ip link set dev $down_dev nomaster
sleep 2
- mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 gt4-dst 100 10
# Test lack of connectivity when neither slave is txable.
ip link set dev $up_dev nomaster
sleep 2
- mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
- mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+ mirror_test vrf-h1 192.0.2.1 192.0.2.18 gt4-dst 100 0
+
+ vlan_capture_uninstall gt4-dst
mirror_uninstall $swp1 ingress
# Recreate H3's team device, because mlxsw, which this test is
--
2.45.0
Powered by blists - more mailing lists