| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240627151127.284884-13-karol.kolacinski@intel.com>
Date: Thu, 27 Jun 2024 17:09:28 +0200
From: Karol Kolacinski <karol.kolacinski@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org,
anthony.l.nguyen@...el.com,
przemyslaw.kitszel@...el.com,
Karol Kolacinski <karol.kolacinski@...el.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Subject: [PATCH iwl-next 4/7] ice: Cache perout/extts requests and check flags
Cache original PTP GPIO requests instead of saving each parameter in
internal structures for periodic output or external timestamp request.
Factor out all periodic output register writes from ice_ptp_cfg_clkout
to a separate function to improve readability.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@...el.com>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 353 +++++++++---------
drivers/net/ethernet/intel/ice/ice_ptp.h | 27 +-
.../net/ethernet/intel/ice/ice_ptp_consts.h | 2 +-
drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 27 +-
4 files changed, 215 insertions(+), 194 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 53885ba71ca8..82b30ea0c8bf 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1576,33 +1576,41 @@ void ice_ptp_extts_event(struct ice_pf *pf)
/**
* ice_ptp_cfg_extts - Configure EXTTS pin and channel
* @pf: Board private structure
- * @chan: GPIO channel (0-3)
- * @config: desired EXTTS configuration.
- * @store: If set to true, the values will be stored
+ * @rq: External timestamp request
+ * @on: Enable/disable flag
*
* Configure an external timestamp event on the requested channel.
*
- * Return: 0 on success, -EOPNOTUSPP on unsupported flags
+ * Return: 0 on success, negative error code otherwise
*/
-static int ice_ptp_cfg_extts(struct ice_pf *pf, unsigned int chan,
- struct ice_extts_channel *config, bool store)
+static int ice_ptp_cfg_extts(struct ice_pf *pf, struct ptp_extts_request *rq,
+ int on)
{
- u32 func, aux_reg, gpio_reg, irq_reg;
+ u32 aux_reg, gpio_reg, irq_reg;
struct ice_hw *hw = &pf->hw;
+ uint chan, gpio_pin;
+ int pin_desc_idx;
u8 tmr_idx;
/* Reject requests with unsupported flags */
- if (config->flags & ~(PTP_ENABLE_FEATURE |
- PTP_RISING_EDGE |
- PTP_FALLING_EDGE |
- PTP_STRICT_FLAGS))
+
+ if (rq->flags & ~(PTP_ENABLE_FEATURE |
+ PTP_RISING_EDGE |
+ PTP_FALLING_EDGE |
+ PTP_STRICT_FLAGS))
return -EOPNOTSUPP;
tmr_idx = hw->func_caps.ts_func_info.tmr_index_owned;
+ chan = rq->index;
+ pin_desc_idx = ice_ptp_find_pin_idx(pf, PTP_PF_EXTTS, chan);
+ if (pin_desc_idx < 0)
+ return -EIO;
+
+ gpio_pin = pf->ptp.ice_pin_desc[pin_desc_idx].gpio[0];
irq_reg = rd32(hw, PFINT_OICR_ENA);
- if (config->ena) {
+ if (on) {
/* Enable the interrupt */
irq_reg |= PFINT_OICR_TSYN_EVNT_M;
aux_reg = GLTSYN_AUX_IN_0_INT_ENA_M;
@@ -1611,33 +1619,39 @@ static int ice_ptp_cfg_extts(struct ice_pf *pf, unsigned int chan,
#define GLTSYN_AUX_IN_0_EVNTLVL_FALLING_EDGE BIT(1)
/* set event level to requested edge */
- if (config->flags & PTP_FALLING_EDGE)
+ if (rq->flags & PTP_FALLING_EDGE)
aux_reg |= GLTSYN_AUX_IN_0_EVNTLVL_FALLING_EDGE;
- if (config->flags & PTP_RISING_EDGE)
+ if (rq->flags & PTP_RISING_EDGE)
aux_reg |= GLTSYN_AUX_IN_0_EVNTLVL_RISING_EDGE;
/* Write GPIO CTL reg.
* 0x1 is input sampled by EVENT register(channel)
* + num_in_channels * tmr_idx
*/
- func = 1 + chan + (tmr_idx * 3);
- gpio_reg = FIELD_PREP(GLGEN_GPIO_CTL_PIN_FUNC_M, func);
- pf->ptp.ext_ts_chan |= (1 << chan);
+ gpio_reg = FIELD_PREP(GLGEN_GPIO_CTL_PIN_FUNC_M,
+ 1 + chan + (tmr_idx * 3));
} else {
+ bool last_enabled = true;
+ uint i;
+
/* clear the values we set to reset defaults */
aux_reg = 0;
gpio_reg = 0;
- pf->ptp.ext_ts_chan &= ~(1 << chan);
- if (!pf->ptp.ext_ts_chan)
+
+ for (i = 0; i < pf->ptp.info.n_ext_ts; i++)
+ if ((pf->ptp.extts_rqs[i].flags &
+ PTP_ENABLE_FEATURE) &&
+ i != chan) {
+ last_enabled = false;
+ }
+
+ if (last_enabled)
irq_reg &= ~PFINT_OICR_TSYN_EVNT_M;
}
wr32(hw, PFINT_OICR_ENA, irq_reg);
wr32(hw, GLTSYN_AUX_IN(chan, tmr_idx), aux_reg);
- wr32(hw, GLGEN_GPIO_CTL(config->gpio_pin), gpio_reg);
-
- if (store)
- memcpy(&pf->ptp.extts_channels[chan], config, sizeof(*config));
+ wr32(hw, GLGEN_GPIO_CTL(gpio_pin), gpio_reg);
return 0;
}
@@ -1648,16 +1662,12 @@ static int ice_ptp_cfg_extts(struct ice_pf *pf, unsigned int chan,
*/
static void ice_ptp_disable_all_extts(struct ice_pf *pf)
{
- struct ice_extts_channel extts_cfg = {};
- int i;
+ uint i;
- for (i = 0; i < pf->ptp.info.n_ext_ts; i++) {
- if (pf->ptp.extts_channels[i].ena) {
- extts_cfg.gpio_pin = pf->ptp.extts_channels[i].gpio_pin;
- extts_cfg.ena = false;
- ice_ptp_cfg_extts(pf, i, &extts_cfg, false);
- }
- }
+ for (i = 0; i < pf->ptp.info.n_ext_ts ; i++)
+ if (pf->ptp.extts_rqs[i].flags & PTP_ENABLE_FEATURE)
+ ice_ptp_cfg_extts(pf, &pf->ptp.extts_rqs[i],
+ false);
synchronize_irq(pf->oicr_irq.virq);
}
@@ -1670,159 +1680,175 @@ static void ice_ptp_disable_all_extts(struct ice_pf *pf)
*/
static void ice_ptp_enable_all_extts(struct ice_pf *pf)
{
- int i;
+ uint i;
- for (i = 0; i < pf->ptp.info.n_ext_ts; i++) {
- if (pf->ptp.extts_channels[i].ena) {
- ice_ptp_cfg_extts(pf, i, &pf->ptp.extts_channels[i],
- false);
- }
- }
+ for (i = 0; i < pf->ptp.info.n_ext_ts ; i++)
+ if (pf->ptp.extts_rqs[i].flags & PTP_ENABLE_FEATURE)
+ ice_ptp_cfg_extts(pf, &pf->ptp.extts_rqs[i],
+ true);
}
/**
- * ice_ptp_cfg_clkout - Configure clock to generate periodic wave
- * @pf: Board private structure
- * @chan: GPIO channel (0-3)
- * @config: desired periodic clk configuration. NULL will disable channel
- * @store: If set to true the values will be stored
+ * ice_ptp_write_perout - Write periodic wave parameters to HW
+ * @hw: pointer to the HW struct
+ * @chan: target channel
+ * @gpio_pin: target GPIO pin
+ * @start: target time to start periodic output
+ * @period: target period
*
- * Configure the internal clock generator modules to generate the clock wave of
- * specified period.
+ * Return: 0 on success, negative error code otherwise
*/
-static int ice_ptp_cfg_clkout(struct ice_pf *pf, unsigned int chan,
- struct ice_perout_channel *config, bool store)
+static int ice_ptp_write_perout(struct ice_hw *hw, unsigned int chan,
+ unsigned int gpio_pin, u64 start, u64 period)
{
- u64 current_time, period, start_time, phase;
- struct ice_hw *hw = &pf->hw;
- u32 func, val, gpio_pin;
- u8 tmr_idx;
- if (config && config->flags & ~PTP_PEROUT_PHASE)
- return -EOPNOTSUPP;
-
- tmr_idx = hw->func_caps.ts_func_info.tmr_index_owned;
+ u8 tmr_idx = hw->func_caps.ts_func_info.tmr_index_owned;
+ u32 val = 0;
/* 0. Reset mode & out_en in AUX_OUT */
wr32(hw, GLTSYN_AUX_OUT(chan, tmr_idx), 0);
- /* If we're disabling the output, clear out CLKO and TGT and keep
- * output level low
+ /* 1. Write perout with half of required period value.
+ * HW toggles output when source clock hits the TGT and then adds
+ * GLTSYN_CLKO value to the target, so it ends up with 50% duty cycle.
*/
- if (!config || !config->ena) {
- wr32(hw, GLTSYN_CLKO(chan, tmr_idx), 0);
- wr32(hw, GLTSYN_TGT_L(chan, tmr_idx), 0);
- wr32(hw, GLTSYN_TGT_H(chan, tmr_idx), 0);
-
- val = GLGEN_GPIO_CTL_PIN_DIR_M;
- gpio_pin = pf->ptp.perout_channels[chan].gpio_pin;
- wr32(hw, GLGEN_GPIO_CTL(gpio_pin), val);
-
- /* Store the value if requested */
- if (store)
- memset(&pf->ptp.perout_channels[chan], 0,
- sizeof(struct ice_perout_channel));
-
- return 0;
- }
- period = config->period;
- start_time = config->start_time;
- div64_u64_rem(start_time, period, &phase);
- gpio_pin = config->gpio_pin;
-
- /* 1. Write clkout with half of required period value */
- if (period & 0x1) {
- dev_err(ice_pf_to_dev(pf), "CLK Period must be an even value\n");
- goto err;
- }
-
period >>= 1;
- /* For proper operation, the GLTSYN_CLKO must be larger than clock tick
+ /* For proper operation, GLTSYN_CLKO must be larger than clock tick and
+ * period has to fit in 32 bit register.
*/
#define MIN_PULSE 3
- if (period <= MIN_PULSE || period > U32_MAX) {
- dev_err(ice_pf_to_dev(pf), "CLK Period must be > %d && < 2^33",
- MIN_PULSE * 2);
- goto err;
+ if (!!period && (period <= MIN_PULSE || period > U32_MAX)) {
+ dev_err(ice_hw_to_dev(hw), "CLK period ticks must be >= %d && <= 2^32",
+ MIN_PULSE);
+ return -EIO;
}
wr32(hw, GLTSYN_CLKO(chan, tmr_idx), lower_32_bits(period));
- /* Allow time for programming before start_time is hit */
- current_time = ice_ptp_read_src_clk_reg(pf, NULL);
-
- /* if start time is in the past start the timer at the nearest second
- * maintaining phase
- */
- if (start_time < current_time)
- start_time = roundup_u64(current_time, NSEC_PER_SEC) + phase;
-
- if (ice_is_e810(hw))
- start_time -= E810_OUT_PROP_DELAY_NS;
- else
- start_time -= ice_e82x_pps_delay(ice_e82x_time_ref(hw));
-
/* 2. Write TARGET time */
- wr32(hw, GLTSYN_TGT_L(chan, tmr_idx), lower_32_bits(start_time));
- wr32(hw, GLTSYN_TGT_H(chan, tmr_idx), upper_32_bits(start_time));
+ wr32(hw, GLTSYN_TGT_L(chan, tmr_idx), lower_32_bits(start));
+ wr32(hw, GLTSYN_TGT_H(chan, tmr_idx), upper_32_bits(start));
/* 3. Write AUX_OUT register */
- val = GLTSYN_AUX_OUT_0_OUT_ENA_M | GLTSYN_AUX_OUT_0_OUTMOD_M;
+ if (!!period)
+ val = GLTSYN_AUX_OUT_0_OUT_ENA_M | GLTSYN_AUX_OUT_0_OUTMOD_M;
wr32(hw, GLTSYN_AUX_OUT(chan, tmr_idx), val);
/* 4. write GPIO CTL reg */
- func = 8 + chan + (tmr_idx * 4);
- val = GLGEN_GPIO_CTL_PIN_DIR_M |
- FIELD_PREP(GLGEN_GPIO_CTL_PIN_FUNC_M, func);
+ val = GLGEN_GPIO_CTL_PIN_DIR_M;
+ if (!!period)
+ val |= FIELD_PREP(GLGEN_GPIO_CTL_PIN_FUNC_M,
+ 8 + chan + (tmr_idx * 4));
+
wr32(hw, GLGEN_GPIO_CTL(gpio_pin), val);
- /* Store the value if requested */
- if (store) {
- memcpy(&pf->ptp.perout_channels[chan], config,
- sizeof(struct ice_perout_channel));
- pf->ptp.perout_channels[chan].start_time = phase;
+ return 0;
+}
+
+/**
+ * ice_ptp_cfg_perout - Configure clock to generate periodic wave
+ * @pf: Board private structure
+ * @rq: Periodic output request
+ * @on: Enable/disable flag
+ *
+ * Configure the internal clock generator modules to generate the clock wave of
+ * specified period.
+ *
+ * Return: 0 on success, negative error code otherwise
+ */
+static int ice_ptp_cfg_perout(struct ice_pf *pf, struct ptp_perout_request *rq,
+ int on)
+{
+ u64 clk, period, start, phase;
+ struct ice_hw *hw = &pf->hw;
+ int pin_desc_idx;
+ uint gpio_pin;
+
+ if (rq->flags & ~PTP_PEROUT_PHASE)
+ return -EOPNOTSUPP;
+
+ pin_desc_idx = ice_ptp_find_pin_idx(pf, PTP_PF_PEROUT, rq->index);
+ if (pin_desc_idx < 0)
+ return -EIO;
+
+ gpio_pin = pf->ptp.ice_pin_desc[pin_desc_idx].gpio[1];
+ period = rq->period.sec * NSEC_PER_SEC + rq->period.nsec;
+
+ /* If we're disabling the output or period is 0, clear out CLKO and TGT
+ * and keep output level low.
+ */
+ if (!on || !period)
+ return ice_ptp_write_perout(hw, rq->index, gpio_pin, 0, 0);
+
+ if (strncmp(pf->ptp.pin_desc[pin_desc_idx].name, "1PPS", 64) == 0 &&
+ period != NSEC_PER_SEC && hw->ptp.phy_model == ICE_PHY_E82X) {
+ dev_err(ice_pf_to_dev(pf), "1PPS pin supports only 1 s period\n");
+ return -EOPNOTSUPP;
}
- return 0;
-err:
- dev_err(ice_pf_to_dev(pf), "PTP failed to cfg per_clk\n");
- return -EFAULT;
+ if (period & 0x1) {
+ dev_err(ice_pf_to_dev(pf), "CLK Period must be an even value\n");
+ return -EIO;
+ }
+
+ start = rq->start.sec * NSEC_PER_SEC + rq->start.nsec;
+
+ /* If PTP_PEROUT_PHASE is set, rq has phase instead of start time */
+ if (rq->flags & PTP_PEROUT_PHASE)
+ phase = start;
+ else
+ div64_u64_rem(start, period, &phase);
+
+ /* If we have only phase or start time is in the past, start the timer
+ * at the next multiple of period, maintaining phase.
+ */
+ clk = ice_ptp_read_src_clk_reg(pf, NULL);
+ if (rq->flags & PTP_PEROUT_PHASE || start <= clk - ice_prop_delay(hw))
+ start = div64_u64(clk + period - 1, period) * period + phase;
+
+ /* Compensate for propagation delay from the generator to the pin. */
+ start -= ice_prop_delay(hw);
+
+ return ice_ptp_write_perout(hw, rq->index, gpio_pin, start, period);
}
/**
- * ice_ptp_disable_all_clkout - Disable all currently configured outputs
- * @pf: pointer to the PF structure
+ * ice_ptp_disable_all_perout - Disable all currently configured outputs
+ * @pf: Board private structure
*
* Disable all currently configured clock outputs. This is necessary before
- * certain changes to the PTP hardware clock. Use ice_ptp_enable_all_clkout to
+ * certain changes to the PTP hardware clock. Use ice_ptp_enable_all_perout to
* re-enable the clocks again.
*/
-static void ice_ptp_disable_all_clkout(struct ice_pf *pf)
+static void ice_ptp_disable_all_perout(struct ice_pf *pf)
{
uint i;
for (i = 0; i < pf->ptp.info.n_per_out; i++)
- if (pf->ptp.perout_channels[i].ena)
- ice_ptp_cfg_clkout(pf, i, NULL, false);
+ if (pf->ptp.perout_rqs[i].period.sec ||
+ pf->ptp.perout_rqs[i].period.nsec)
+ ice_ptp_cfg_perout(pf, &pf->ptp.perout_rqs[i],
+ false);
}
/**
- * ice_ptp_enable_all_clkout - Enable all configured periodic clock outputs
- * @pf: pointer to the PF structure
+ * ice_ptp_enable_all_perout - Enable all configured periodic clock outputs
+ * @pf: Board private structure
*
* Enable all currently configured clock outputs. Use this after
- * ice_ptp_disable_all_clkout to reconfigure the output signals according to
+ * ice_ptp_disable_all_perout to reconfigure the output signals according to
* their configuration.
*/
-static void ice_ptp_enable_all_clkout(struct ice_pf *pf)
+static void ice_ptp_enable_all_perout(struct ice_pf *pf)
{
uint i;
for (i = 0; i < pf->ptp.info.n_per_out; i++)
- if (pf->ptp.perout_channels[i].ena)
- ice_ptp_cfg_clkout(pf, i, &pf->ptp.perout_channels[i],
- false);
+ if (pf->ptp.perout_rqs[i].period.sec ||
+ pf->ptp.perout_rqs[i].period.nsec)
+ ice_ptp_cfg_perout(pf, &pf->ptp.perout_rqs[i],
+ true);
}
/**
@@ -1868,7 +1894,7 @@ static int ice_verify_pin(struct ptp_clock_info *info, unsigned int pin,
* @rq: The requested feature to change
* @on: Enable/disable flag
*
- * Return: 0 on success, -EOPNOTSUPP when request type is not supported
+ * Return: 0 on success, negative error code otherwise
*/
static int ice_ptp_gpio_enable(struct ptp_clock_info *info,
struct ptp_clock_request *rq, int on)
@@ -1879,40 +1905,29 @@ static int ice_ptp_gpio_enable(struct ptp_clock_info *info,
switch (rq->type) {
case PTP_CLK_REQ_PEROUT:
{
- struct ice_perout_channel clk_cfg;
- int pin_desc_idx;
-
- pin_desc_idx = ice_ptp_find_pin_idx(pf, PTP_PF_PEROUT,
- rq->perout.index);
- if (pin_desc_idx < 0)
- return -EIO;
+ struct ptp_perout_request *cached =
+ &pf->ptp.perout_rqs[rq->perout.index];
-
- clk_cfg.flags = rq->perout.flags;
- clk_cfg.gpio_pin = pf->ptp.ice_pin_desc[pin_desc_idx].gpio[1];
- clk_cfg.period = rq->perout.period.sec * NSEC_PER_SEC +
- rq->perout.period.nsec;
- clk_cfg.start_time = rq->perout.start.sec * NSEC_PER_SEC +
- rq->perout.start.nsec;
- clk_cfg.ena = !!on;
-
- return ice_ptp_cfg_clkout(pf, rq->perout.index, &clk_cfg, true);
+ err = ice_ptp_cfg_perout(pf, &rq->perout, on);
+ if (!err) {
+ *cached = rq->perout;
+ } else {
+ cached->period.sec = 0;
+ cached->period.nsec = 0;
+ }
+ return err;
}
case PTP_CLK_REQ_EXTTS:
{
- struct ice_extts_channel extts_cfg = {};
- int pin_desc_idx;
-
- pin_desc_idx = ice_ptp_find_pin_idx(pf, PTP_PF_EXTTS,
- rq->extts.index);
- if (pin_desc_idx < 0)
- return -EIO;
+ struct ptp_extts_request *cached =
+ &pf->ptp.extts_rqs[rq->extts.index];
- extts_cfg.flags = rq->extts.flags;
- extts_cfg.gpio_pin = pf->ptp.ice_pin_desc[pin_desc_idx].gpio[0];
- extts_cfg.ena = !!on;
-
- return ice_ptp_cfg_extts(pf, rq->extts.index, &extts_cfg, true);
+ err = ice_ptp_cfg_extts(pf, &rq->extts, on);
+ if (!err)
+ *cached = rq->extts;
+ else
+ cached->flags &= ~PTP_ENABLE_FEATURE;
+ return err;
}
default:
return -EOPNOTSUPP;
@@ -1972,7 +1987,7 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
}
/* Disable periodic outputs */
- ice_ptp_disable_all_clkout(pf);
+ ice_ptp_disable_all_perout(pf);
err = ice_ptp_write_init(pf, &ts64);
ice_ptp_unlock(hw);
@@ -1981,7 +1996,7 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
ice_ptp_reset_cached_phctime(pf);
/* Reenable periodic outputs */
- ice_ptp_enable_all_clkout(pf);
+ ice_ptp_enable_all_perout(pf);
/* Recalibrate and re-enable timestamp blocks for E822/E823 */
if (hw->ptp.phy_model == ICE_PHY_E82X)
@@ -2043,12 +2058,12 @@ static int ice_ptp_adjtime(struct ptp_clock_info *info, s64 delta)
}
/* Disable periodic outputs */
- ice_ptp_disable_all_clkout(pf);
+ ice_ptp_disable_all_perout(pf);
err = ice_ptp_write_adj(pf, delta);
/* Reenable periodic outputs */
- ice_ptp_enable_all_clkout(pf);
+ ice_ptp_enable_all_perout(pf);
ice_ptp_unlock(hw);
@@ -2659,7 +2674,7 @@ void ice_ptp_prepare_for_reset(struct ice_pf *pf, enum ice_reset_req reset_type)
ice_ptp_release_tx_tracker(pf, &pf->ptp.port.tx);
/* Disable periodic outputs */
- ice_ptp_disable_all_clkout(pf);
+ ice_ptp_disable_all_perout(pf);
src_tmr = ice_get_ptp_src_clock_index(&pf->hw);
@@ -2736,7 +2751,7 @@ static int ice_ptp_rebuild_owner(struct ice_pf *pf)
}
/* Re-enable all periodic outputs and external timestamp events */
- ice_ptp_enable_all_clkout(pf);
+ ice_ptp_enable_all_perout(pf);
ice_ptp_enable_all_extts(pf);
return 0;
@@ -3316,7 +3331,7 @@ void ice_ptp_release(struct ice_pf *pf)
return;
/* Disable periodic outputs */
- ice_ptp_disable_all_clkout(pf);
+ ice_ptp_disable_all_perout(pf);
ptp_clock_unregister(pf->ptp.clock);
pf->ptp.clock = NULL;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.h b/drivers/net/ethernet/intel/ice/ice_ptp.h
index 449a0eaf904f..d5bc93036200 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.h
@@ -8,19 +8,6 @@
#include <linux/kthread.h>
#include "ice_ptp_hw.h"
-struct ice_perout_channel {
- bool ena;
- u32 gpio_pin;
- u32 flags;
- u64 period;
- u64 start_time;
-};
-
-struct ice_extts_channel {
- bool ena;
- u32 gpio_pin;
- u32 flags;
-};
/* The ice hardware captures Tx hardware timestamps in the PHY. The timestamp
* is stored in a buffer of registers. Depending on the specific hardware,
@@ -259,13 +246,18 @@ struct ice_ptp_pin_desc {
* @work: delayed work function for periodic tasks
* @cached_phc_time: a cached copy of the PHC time for timestamp extension
* @cached_phc_jiffies: jiffies when cached_phc_time was last updated
- * @ext_ts_chan: the external timestamp channel in use
+ * @kworker: kwork thread for handling periodic work
* @ext_ts_irq: the external timestamp IRQ in use
* @pin_desc: structure defining pins
* @ice_pin_desc: internal structure describing pin relations
+<<<<<<< HEAD
* @kworker: kwork thread for handling periodic work
* @perout_channels: periodic output data
* @extts_channels: channels for external timestamps
+=======
+ * @perout_rqs: cached periodic output requests
+ * @extts_rqs: cached external timestamp requests
+>>>>>>> de618462ed43 (ice: Cache perout/extts requests and check flags)
* @info: structure defining PTP hardware capabilities
* @clock: pointer to registered PTP clock device
* @tstamp_config: hardware timestamping configuration
@@ -285,13 +277,12 @@ struct ice_ptp {
struct kthread_delayed_work work;
u64 cached_phc_time;
unsigned long cached_phc_jiffies;
- u8 ext_ts_chan;
- u8 ext_ts_irq;
struct kthread_worker *kworker;
+ u8 ext_ts_irq;
struct ptp_pin_desc pin_desc[ICE_N_PINS_MAX];
const struct ice_ptp_pin_desc *ice_pin_desc;
- struct ice_perout_channel perout_channels[GLTSYN_TGT_H_IDX_MAX];
- struct ice_extts_channel extts_channels[GLTSYN_TGT_H_IDX_MAX];
+ struct ptp_perout_request perout_rqs[GLTSYN_TGT_H_IDX_MAX];
+ struct ptp_extts_request extts_rqs[GLTSYN_EVNT_H_IDX_MAX];
struct ptp_clock_info info;
struct ptp_clock *clock;
struct hwtstamp_config tstamp_config;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
index e6980b94a6c1..585ce200c60f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
@@ -334,7 +334,7 @@ struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = {
* reference. See the struct ice_time_ref_info_e82x for information about the
* meaning of each constant.
*/
-const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ] = {
+const struct ice_time_ref_info_e82x e82x_time_ref[NUM_ICE_TIME_REF_FREQ] = {
/* ICE_TIME_REF_FREQ_25_000 -> 25 MHz */
{
/* pll_freq */
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 264b290392d7..c42831449787 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -316,7 +316,7 @@ ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ];
extern const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES];
/* Table of constants related to possible TIME_REF sources */
-extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ];
+extern const struct ice_time_ref_info_e82x e82x_time_ref[NUM_ICE_TIME_REF_FREQ];
/* Table of constants for Vernier calibration on E822 */
extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD];
@@ -326,7 +326,8 @@ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD];
*/
#define ICE_E810_PLL_FREQ 812500000
#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL
-#define E810_OUT_PROP_DELAY_NS 1
+#define ICE_E810_OUT_PROP_DELAY_NS 1
+#define ICE_E825C_OUT_PROP_DELAY_NS 11
/* Device agnostic functions */
u8 ice_get_ptp_src_clock_index(struct ice_hw *hw);
@@ -358,7 +359,7 @@ void ice_ptp_reset_ts_memory_quad_e82x(struct ice_hw *hw, u8 quad);
*
* Returns the current TIME_REF from the capabilities structure.
*/
-static inline enum ice_time_ref_freq ice_e82x_time_ref(struct ice_hw *hw)
+static inline enum ice_time_ref_freq ice_e82x_time_ref(const struct ice_hw *hw)
{
return hw->func_caps.ts_func_info.time_ref;
}
@@ -379,17 +380,17 @@ ice_set_e82x_time_ref(struct ice_hw *hw, enum ice_time_ref_freq time_ref)
static inline u64 ice_e82x_pll_freq(enum ice_time_ref_freq time_ref)
{
- return e822_time_ref[time_ref].pll_freq;
+ return e82x_time_ref[time_ref].pll_freq;
}
static inline u64 ice_e82x_nominal_incval(enum ice_time_ref_freq time_ref)
{
- return e822_time_ref[time_ref].nominal_incval;
+ return e82x_time_ref[time_ref].nominal_incval;
}
static inline u64 ice_e82x_pps_delay(enum ice_time_ref_freq time_ref)
{
- return e822_time_ref[time_ref].pps_delay;
+ return e82x_time_ref[time_ref].pps_delay;
}
/* E822 Vernier calibration functions */
@@ -431,6 +432,20 @@ int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port);
#define ICE_ETH56G_NOMINAL_THRESH4 0x7777
#define ICE_ETH56G_NOMINAL_TX_THRESH 0x6
+static inline u64 ice_prop_delay(const struct ice_hw *hw)
+{
+ switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ICE_E825C_OUT_PROP_DELAY_NS;
+ case ICE_PHY_E810:
+ return ICE_E810_OUT_PROP_DELAY_NS;
+ case ICE_PHY_E82X:
+ return ice_e82x_pps_delay(ice_e82x_time_ref(hw));
+ default:
+ return 0;
+ }
+}
+
/**
* ice_get_base_incval - Get base clock increment value
* @hw: pointer to the HW struct
--
2.45.2
Powered by blists - more mailing lists