[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20240702132044.GA615643@kernel.org>
Date: Tue, 2 Jul 2024 14:20:44 +0100
From: Simon Horman <horms@...nel.org>
To: Peter Yin <peteryin.openbmc@...il.com>
Cc: patrick@...cx.xyz, amithash@...a.com,
Samuel Mendoza-Jonas <sam@...dozajonas.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
Cosmo Chou <cosmo.chou@...ntatw.com>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, netdev@...r.kernel.org
Subject: Re: [PATCH v1 1/1] net/ncsi: specify maximum package to probe
[ + netdev, which I accidently dropped from the CC list ]
On Tue, Jul 02, 2024 at 02:00:30PM +0100, Simon Horman wrote:
> [ As this seems to relate to: DT, ASPEED and ARM, CC:
> Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
> devicetree, linux-arm-kernel, linux-aspeed. ]
>
> On Mon, Jul 01, 2024 at 11:43:36PM +0800, Peter Yin wrote:
> > Most NICs have a single package. For OCP3.0 NICs, the package ID is
> > determined by the slot ID. Probing all 8 package IDs is usually
> > unnecessary. To reduce probe time, add properties to specify the
> > maximum number of packages.
> >
> > Signed-off-by: Cosmo Chou <cosmo.chou@...ntatw.com>
> > Signed-off-by: Peter Yin <peteryin.openbmc@...il.com>
> > ---
> > net/ncsi/internal.h | 1 +
> > net/ncsi/ncsi-manage.c | 16 ++++++++++++----
> > 2 files changed, 13 insertions(+), 4 deletions(-)
> >
> > diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
> > index ef0f8f73826f..bd7ad0bf803f 100644
> > --- a/net/ncsi/internal.h
> > +++ b/net/ncsi/internal.h
> > @@ -341,6 +341,7 @@ struct ncsi_dev_priv {
> > #define NCSI_MAX_VLAN_VIDS 15
> > struct list_head vlan_vids; /* List of active VLAN IDs */
> >
> > + unsigned int max_package; /* Num of packages to probe */
> > bool multi_package; /* Enable multiple packages */
> > bool mlx_multi_host; /* Enable multi host Mellanox */
> > u32 package_whitelist; /* Packages to configure */
> > diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> > index 5ecf611c8820..159943ee1317 100644
> > --- a/net/ncsi/ncsi-manage.c
> > +++ b/net/ncsi/ncsi-manage.c
> > @@ -1358,12 +1358,12 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
> > nd->state = ncsi_dev_state_probe_deselect;
> > fallthrough;
> > case ncsi_dev_state_probe_deselect:
> > - ndp->pending_req_num = 8;
> > + ndp->pending_req_num = ndp->max_package;
> >
> > /* Deselect all possible packages */
> > nca.type = NCSI_PKT_CMD_DP;
> > nca.channel = NCSI_RESERVED_CHANNEL;
> > - for (index = 0; index < 8; index++) {
> > + for (index = 0; index < ndp->max_package; index++) {
> > nca.package = index;
> > ret = ncsi_xmit_cmd(&nca);
> > if (ret)
> > @@ -1491,7 +1491,7 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
> >
> > /* Probe next package */
> > ndp->package_probe_id++;
> > - if (ndp->package_probe_id >= 8) {
> > + if (ndp->package_probe_id >= ndp->max_package) {
> > /* Probe finished */
> > ndp->flags |= NCSI_DEV_PROBED;
> > break;
> > @@ -1746,7 +1746,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
> > struct platform_device *pdev;
> > struct device_node *np;
> > unsigned long flags;
> > - int i;
> > + int i, ret;
> >
> > /* Check if the device has been registered or not */
> > nd = ncsi_find_dev(dev);
> > @@ -1795,6 +1795,14 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
> > if (np && (of_property_read_bool(np, "mellanox,multi-host") ||
> > of_property_read_bool(np, "mlx,multi-host")))
> > ndp->mlx_multi_host = true;
> > +
>
> Should the "ncsi-package" (and above multi-host properties) be
> documented in DT bindings somewhere? I was unable to locate such
> documentation.
>
> > + if (np) {
> > + ret = of_property_read_u32(np, "ncsi-package",
> > + &ndp->max_package);
> > + if (ret || !ndp->max_package ||
> > + ndp->max_package > NCSI_MAX_PACKAGE)
> > + ndp->max_package = NCSI_MAX_PACKAGE;
> > + }
> > }
>
> It seems that ndp->max_package will be 0 unless pdev != NULL and np != NULL.
> Would it be better set to NCSI_MAX_PACKAGE in such cases?
>
> >
> > return nd;
> > --
> > 2.25.1
> >
> >
Powered by blists - more mailing lists