netdev - [PATCH net-next 0/3][pull request] ice: Support to dump PHY config, FEC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240702180710.2606969-1-anthony.l.nguyen@intel.com>
Date: Tue,  2 Jul 2024 11:07:04 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net,
	kuba@...nel.org,
	pabeni@...hat.com,
	edumazet@...gle.com,
	netdev@...r.kernel.org
Cc: Tony Nguyen <anthony.l.nguyen@...el.com>,
	anil.samal@...el.com
Subject: [PATCH net-next 0/3][pull request] ice: Support to dump PHY config, FEC

Anil Samal says:

Implementation to dump PHY configuration and FEC statistics to
facilitate link level debugging of customer issues. Implementation has
two parts

a.     Serdes equalization
        # ethtool  -d eth0 
        Output: 
        Offset          Values
        ------          ------
        0x0000:         00 00 00 00 03 00 00 00 05 00 00 00 01 08 00 40
        0x0010:         01 00 00 40 00 00 39 3c 01 00 00 00 00 00 00 00
        0x0020:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        ...
        0x01f0:         01 00 00 00 ef be ad de 8f 00 00 00 00 00 00 00
        0x0200:         00 00 00 00 ef be ad de 00 00 00 00 00 00 00 00
        0x0210:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0220:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0230:         00 00 00 00 00 00 00 00 00 00 00 00 fa ff 00 00
        0x0240:         06 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
        0x0250:         0f b0 0f b0 00 00 00 00 00 00 00 00 00 00 00 00
        0x0260:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0270:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0280:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x0290:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02a0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02b0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02c0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02d0:         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0x02e0:         00 00 00 00 00 00 00 00 00 00 00 00
Current implementation appends 176 bytes i.e. 44 bytes * 4 serdes lane.
For port with 2 serdes lane, first 88 bytes are valid values and
remaining 88 bytes are filled with zero. Similarly for port with 1
serdes lane, first 44 bytes are valid and remaining 132 bytes are marked
zero.

Each set of serdes equalizer parameter (i.e. set of 44 bytes) follows
below order
    a. rx_equalization_pre2
    b. rx_equalization_pre1
    c. rx_equalization_post1
    d. rx_equalization_bflf
    e. rx_equalization_bfhf
    f. rx_equalization_drate
    g. tx_equalization_pre1
    h. tx_equalization_pre3
    i. tx_equalization_atten
    j. tx_equalization_post1
    k. tx_equalization_pre2
Where each individual equalizer parameter is of 4 bytes. As ethtool
prints values as individual bytes, for little endian machine these
values will be in reverse byte order.

b.    FEC block counts
        # ethtool  -I --show-fec eth0
        Output:
         FEC parameters for eth0:
        Supported/Configured FEC encodings: Auto RS BaseR
        Active FEC encoding: RS
        Statistics:
        corrected_blocks: 0
         uncorrectable_blocks: 0

This series do following:
Patch 1 - Implementation to support user provided flag for side band
queue command.
Patch 2 - Currently driver does not have a way to derive serdes lane
number, pcs quad , pcs port from port number.So we introduced a
mechanism to derive above info. 
          Ethtool interface extension to include FEC statistics counter.
Patch 3 - Ethtool interface extension to include serdes equalizer
output.

The following are changes since commit ac26327635d643efe173e7460fa09eb39f0e5c54:
  Merge branch 'fixes-for-stm32-dwmac-driver-fails-to-probe'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE

Anil Samal (3):
  ice: Extend Sideband Queue command to support flags
  ice: Implement driver functionality to dump fec statistics
  ice: Implement driver functionality to dump serdes equalizer values

 .../net/ethernet/intel/ice/ice_adminq_cmd.h   |  51 ++
 drivers/net/ethernet/intel/ice/ice_common.c   |  99 +++-
 drivers/net/ethernet/intel/ice/ice_common.h   |  28 +-
 drivers/net/ethernet/intel/ice/ice_ethtool.c  | 449 +++++++++++++++++-
 drivers/net/ethernet/intel/ice/ice_ethtool.h  |  29 ++
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c   |  20 +-
 drivers/net/ethernet/intel/ice/ice_type.h     |   8 +
 7 files changed, 669 insertions(+), 15 deletions(-)

-- 
2.41.0