[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJaqyWeDwkTbi1ti0z+FsrxViubuxVe+mNtJ2zxbHmTteyR0XQ@mail.gmail.com>
Date: Wed, 3 Jul 2024 17:07:01 +0200
From: Eugenio Perez Martin <eperezma@...hat.com>
To: Dragos Tatulea <dtatulea@...dia.com>
Cc: "Michael S. Tsirkin" <mst@...hat.com>, Jason Wang <jasowang@...hat.com>,
Xuan Zhuo <xuanzhuo@...ux.alibaba.com>, Saeed Mahameed <saeedm@...dia.com>,
Leon Romanovsky <leon@...nel.org>, Tariq Toukan <tariqt@...dia.com>, Si-Wei Liu <si-wei.liu@...cle.com>,
virtualization@...ts.linux.dev, linux-kernel@...r.kernel.org,
linux-rdma@...r.kernel.org, netdev@...r.kernel.org,
Cosmin Ratiu <cratiu@...dia.com>
Subject: Re: [PATCH vhost v2 07/24] vdpa/mlx5: Initialize and reset device
with one queue pair
On Wed, Jun 26, 2024 at 12:27 PM Dragos Tatulea <dtatulea@...dia.com> wrote:
>
> The virtio spec says that a vdpa device should start off with one queue
> pair. The driver is already compliant.
>
> This patch moves the initialization to device add and reset times. This
> is done in preparation for the pre-creation of hardware virtqueues at
> device add time.
>
> Signed-off-by: Dragos Tatulea <dtatulea@...dia.com>
> Reviewed-by: Cosmin Ratiu <cratiu@...dia.com>
Acked-by: Eugenio Pérez <eperezma@...hat.com>
> ---
> drivers/vdpa/mlx5/net/mlx5_vnet.c | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index eca6f68c2eda..c8b5c87f001d 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -48,6 +48,16 @@ MODULE_LICENSE("Dual BSD/GPL");
>
> #define MLX5V_UNTAGGED 0x1000
>
> +/* Device must start with 1 queue pair, as per VIRTIO v1.2 spec, section
> + * 5.1.6.5.5 "Device operation in multiqueue mode":
> + *
> + * Multiqueue is disabled by default.
> + * The driver enables multiqueue by sending a command using class
> + * VIRTIO_NET_CTRL_MQ. The command selects the mode of multiqueue
> + * operation, as follows: ...
> + */
> +#define MLX5V_DEFAULT_VQ_COUNT 2
> +
> struct mlx5_vdpa_cq_buf {
> struct mlx5_frag_buf_ctrl fbc;
> struct mlx5_frag_buf frag_buf;
> @@ -2713,16 +2723,6 @@ static int mlx5_vdpa_set_driver_features(struct vdpa_device *vdev, u64 features)
> else
> ndev->rqt_size = 1;
>
> - /* Device must start with 1 queue pair, as per VIRTIO v1.2 spec, section
> - * 5.1.6.5.5 "Device operation in multiqueue mode":
> - *
> - * Multiqueue is disabled by default.
> - * The driver enables multiqueue by sending a command using class
> - * VIRTIO_NET_CTRL_MQ. The command selects the mode of multiqueue
> - * operation, as follows: ...
> - */
> - ndev->cur_num_vqs = 2;
> -
> update_cvq_info(mvdev);
> return err;
> }
> @@ -3040,7 +3040,7 @@ static int mlx5_vdpa_compat_reset(struct vdpa_device *vdev, u32 flags)
> mlx5_vdpa_destroy_mr_resources(&ndev->mvdev);
> ndev->mvdev.status = 0;
> ndev->mvdev.suspended = false;
> - ndev->cur_num_vqs = 0;
> + ndev->cur_num_vqs = MLX5V_DEFAULT_VQ_COUNT;
> ndev->mvdev.cvq.received_desc = 0;
> ndev->mvdev.cvq.completed_desc = 0;
> memset(ndev->event_cbs, 0, sizeof(*ndev->event_cbs) * (mvdev->max_vqs + 1));
> @@ -3643,6 +3643,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> err = -ENOMEM;
> goto err_alloc;
> }
> + ndev->cur_num_vqs = MLX5V_DEFAULT_VQ_COUNT;
>
> init_mvqs(ndev);
> allocate_irqs(ndev);
>
> --
> 2.45.1
>
Powered by blists - more mailing lists