[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240708084934.131175-1-enguerrand.de-ribaucourt@savoirfairelinux.com>
Date: Mon, 8 Jul 2024 10:49:34 +0200
From: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@...oirfairelinux.com>
To: netdev@...r.kernel.org
Cc: andrew@...n.ch,
hkallweit1@...il.com,
linux@...linux.org.uk,
woojung.huh@...rochip.com,
UNGLinuxDriver@...rochip.com,
kuba@...nel.org,
Tristram.Ha@...rochip.com,
Arun.Ramadoss@...rochip.com,
horms@...nel.org,
Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@...oirfairelinux.com>
Subject: [PATCH net-next] net: dsa: microchip: ksz9477: split half-duplex monitoring function
In order to respect the 80 columns limit, split the half-duplex
monitoring function in two.
This is just a styling change, no functional change.
Fixes: bf1bff11e497 ("net: dsa: microchip: monitor potential faults in half-duplex mode")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@...oirfairelinux.com>
---
drivers/net/dsa/microchip/ksz9477.c | 87 +++++++++++++++++------------
1 file changed, 50 insertions(+), 37 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 425e20daf1e9..17f6deb3c598 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -427,54 +427,67 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
mutex_unlock(&p->mib.cnt_mutex);
}
-int ksz9477_errata_monitor(struct ksz_device *dev, int port,
- u64 tx_late_col)
+static int ksz9477_half_duplex_monitor(struct ksz_device *dev, int port,
+ u64 tx_late_col)
{
+ u8 lue_ctrl;
u32 pmavbc;
- u8 status;
u16 pqm;
int ret;
- ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status);
+ /* Errata DS80000754 recommends monitoring potential faults in
+ * half-duplex mode. The switch might not be able to communicate anymore
+ * in these states. If you see this message, please read the
+ * errata-sheet for more information:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents
+ * /UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
+ * To workaround this issue, half-duplex mode should be avoided.
+ * A software reset could be implemented to recover from this state.
+ */
+ dev_warn_once(dev->dev,
+ "Half-duplex detected on port %d, transmission halt may occur\n",
+ port);
+ if (tx_late_col != 0) {
+ /* Transmission halt with late collisions */
+ dev_crit_once(dev->dev,
+ "TX late collisions detected, transmission may be halted on port %d\n",
+ port);
+ }
+ ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &lue_ctrl);
if (ret)
return ret;
- if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) == PORT_INTF_SPEED_NONE) &&
- !(status & PORT_INTF_FULL_DUPLEX)) {
- /* Errata DS80000754 recommends monitoring potential faults in
- * half-duplex mode. The switch might not be able to communicate anymore
- * in these states.
- * If you see this message, please read the errata-sheet for more information:
- * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
- * To workaround this issue, half-duplex mode should be avoided.
- * A software reset could be implemented to recover from this state.
- */
- dev_warn_once(dev->dev,
- "Half-duplex detected on port %d, transmission halt may occur\n",
- port);
- if (tx_late_col != 0) {
- /* Transmission halt with late collisions */
- dev_crit_once(dev->dev,
- "TX late collisions detected, transmission may be halted on port %d\n",
- port);
- }
- ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &status);
+ if (lue_ctrl & SW_VLAN_ENABLE) {
+ ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm);
if (ret)
return ret;
- if (status & SW_VLAN_ENABLE) {
- ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm);
- if (ret)
- return ret;
- ret = ksz_read32(dev, REG_PMAVBC, &pmavbc);
- if (ret)
- return ret;
- if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) ||
- (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) {
- /* Transmission halt with Half-Duplex and VLAN */
- dev_crit_once(dev->dev,
- "resources out of limits, transmission may be halted\n");
- }
+ ret = ksz_read32(dev, REG_PMAVBC, &pmavbc);
+ if (ret)
+ return ret;
+ if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) ||
+ (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) {
+ /* Transmission halt with Half-Duplex and VLAN */
+ dev_crit_once(dev->dev,
+ "resources out of limits, transmission may be halted\n");
}
}
+
+ return ret;
+}
+
+int ksz9477_errata_monitor(struct ksz_device *dev, int port,
+ u64 tx_late_col)
+{
+ u8 status;
+ int ret;
+
+ ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status);
+ if (ret)
+ return ret;
+ if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status)
+ == PORT_INTF_SPEED_NONE) &&
+ !(status & PORT_INTF_FULL_DUPLEX)) {
+ ret = ksz9477_half_duplex_monitor(dev, port, tx_late_col);
+ }
return ret;
}
--
2.34.1
Powered by blists - more mailing lists