[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1720512634.git.siyanteng@loongson.cn>
Date: Tue, 9 Jul 2024 17:34:07 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
fancer.lancer@...il.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
Jose.Abreu@...opsys.com,
chenhuacai@...nel.org,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
chris.chenfeiyang@...il.com,
si.yanteng@...ux.dev
Subject: [PATCH net-next v14 00/14] stmmac: Add Loongson platform support
v14:
Because Loongson GMAC can be also found with the 8-channels AV feature
enabled, we'll need to reconsider the patches logic and thus the
commit logs too. As Serge's comments and Russell's comments:
[PATCH net-next v14 01/15] net: stmmac: Move the atds flag to the stmmac_dma_cfg structure
[PATCH net-next v14 02/15] net: stmmac: Add multi-channel support
[PATCH net-next v14 03/15] net: stmmac: Export dwmac1000_dma_ops
[PATCH net-next v14 04/15] net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init
[PATCH net-next v14 05/15] net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls
[PATCH net-next v14 06/15] net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification
[PATCH net-next v14 07/15] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
+-> Init the plat_stmmacenet_data::{tx_queues_to_use,rx_queues_to_use}
in the loongson_gmac_data() method.
[PATCH net-next v14 08/15] net: stmmac: dwmac-loongson: Init ref and PTP clocks rate
[PATCH net-next v14 09/15] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC
[PATCH net-next v14 10/15] net: stmmac: dwmac-loongson: Introduce PCI device info data
+-> Make sure the setup() method is called after the pci_enable_device()
invocation.
[PATCH net-next v14 11/15] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support
+-> Introduce the loongson_dwmac_dt_config() method here instead of
doing that in a separate patch.
+-> Add loongson_dwmac_acpi_config() which would just get the IRQ from
the pdev->irq field and make sure it is valid.
[PATCH net-next v14 12/15] net: stmmac: Fixed failure to set network speed to 1000.
+-> Drop the patch as Russell's comments, At the same time, he provided another
better repair suggestion, and I decided to send it separately after the
patch set was merged. See:
<https://lore.kernel.org/netdev/ZoW1fNqV3PxEobFx@shell.armlinux.org.uk/>
[PATCH net-next v14 13/15] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support
+-> This is former "net: stmmac: dwmac-loongson: Add Loongson GNET
support" patch, but which adds the support of the Loongson GMAC with the
8-channels AV-feature available.
+-> loongson_dwmac_intx_config() shall be dropped due to the
loongson_dwmac_acpi_config() method added in the PATCH 11/15.
+-> Make sure loongson_data::loongson_id is initialized before the
stmmac_pci_info::setup() is called.
+-> Move the rx_queues_to_use/tx_queues_to_use and coe_unsupported
fields initialization to the loongson_gmac_data() method.
+-> As before, call the loongson_dwmac_msi_config() method if the multi-channels
Loongson MAC has been detected.
+-> Move everything GNET-specific to the next patch.
[PATCH net-next v14 14/15] net: stmmac: dwmac-loongson: Add Loongson GNET support
+-> Everything Loonsgson GNET-specific is supposed to be added in the
framework of this patch:
+ PCI_DEVICE_ID_LOONGSON_GNET macro
+ loongson_gnet_fix_speed() method
+ loongson_gnet_data() method
+ loongson_gnet_pci_info data
+ The GNET-specific part of the loongson_dwmac_setup() method.
+ ...
[PATCH net-next v14 15/15] net: stmmac: dwmac-loongson: Add loongson module author
Other's:
Pick Serge's Reviewed-by tag.
v13:
* Sorry, we have clarified some things in the past 10 days. I did not
give you a clear reply to the following questions in v12, so I need
to reply again:
1. The current LS2K2000 also have a GMAC(and two GNET) that supports 8
channels, so we have to reconsider the initialization of
tx/rx_queues_to_use into probe();
2. In v12, we disagreed on the loongson_dwmac_msi_config method, but I changed
it based on Serge's comments(If I understand correctly):
if (dev_of_node(&pdev->dev)) {
ret = loongson_dwmac_dt_config(pdev, plat, &res);
}
if (ld->loongson_id == DWMAC_CORE_LS2K2000) {
ret = loongson_dwmac_msi_config(pdev, plat, &res);
} else {
ret = loongson_dwmac_intx_config(pdev, plat, &res);
}
3. Our priv->dma_cap.pcs is false, so let's use PHY_INTERFACE_MODE_NA;
4. Our GMAC does not support Delay, so let's use PHY_INTERFACE_MODE_RGMII_ID,
the current dts is wrong, a fix patch will be sent to the LoongArch list
later.
Others:
* Re-split a part of the patch (it seems we do this with every version);
* Copied Serge's comments into the commit message of patch;
* Fixed the stmmac_dma_operation_mode() method;
* Changed some code comments.
v12:
* The biggest change is the re-splitting of patches.
* Add a "gmac_version" in loongson_data, then we only
read it once in the _probe().
* Drop Serge's patch.
* Rebase to the latest code state.
* Fixed the gnet commit message.
v11:
* Break loongson_phylink_get_caps(), fix bad logic.
* Remove a unnecessary ";".
* Remove some unnecessary "{}".
* add a blank.
* Move the code of fix _force_1000 to patch 6/6.
The main changes occur in these two functions:
loongson_dwmac_probe();
loongson_dwmac_setup();
v10:
As Andrew's comment:
* Add a #define for the 0x37.
* Add a #define for Port Select.
others:
* Pick Serge's patch, This patch resulted from the process
of reviewing our patch set.
* Based on Serge's patch, modify our loongson_phylink_get_caps().
* Drop patch 3/6, we need mac_interface.
* Adjusted the code layout of gnet patch.
* Corrected several errata in commit message.
* Move DISABLE_FORCE flag to loongson_gnet_data().
v9:
We have not provided a detailed list of equipment for a long time,
and I apologize for this. During this period, I have collected some
information and now present it to you, hoping to alleviate the pressure
of review.
1. IP core
We now have two types of IP cores, one is 0x37, similar to dwmac1000;
The other is 0x10. Compared to 0x37, we split several DMA registers
from one to two, and it is not worth adding a new entry for this.
According to Serge's comment, we made these devices work by overwriting
priv->synopsys_id = 0x37 and mac->dma = <LS_dma_ops>.
1.1. Some more detailed information
The number of DMA channels for 0x37 is 1; The number of DMA channels
for 0x10 is 8. Except for channel 0, otherchannels do not support
sending hardware checksums. Supported AV features are Qav, Qat, and Qas,
and the rest are consistent with 3.73.
2. DEVICE
We have two types of devices,
one is GMAC, which only has a MAC chip inside and needs an external PHY
chip;
the other is GNET, which integrates both MAC and PHY chips inside.
2.1. Some more detailed information
GMAC device: LS7A1000, LS2K1000, these devices do not support any pause
mode.
gnet device: LS7A2000, LS2K2000, the chip connection between the mac and
phy of these devices is not normal and requires two rounds of
negotiation; LS7A2000 does not support half-duplex and
multi-channel;
to enable multi-channel on LS2K2000, you need to turn off
hardware checksum.
**Note**: Only the LS2K2000's IP core is 0x10, while the IP cores of other
devices are 0x37.
3. TABLE
device type pci_id ip_core
ls7a1000 gmac 7a03 0x35/0x37
ls2k1000 gmac 7a03 0x35/0x37
ls7a2000 gnet 7a13 0x37
ls2k2000 gnet 7a13 0x10
-----------------------------------------------
Changes:
* passed the CI
<https://github.com/linux-netdev/nipa/blob/main/tests/patch/checkpatch
/checkpatch.sh>
* reverse xmas tree order.
* Silence build warning.
* Re-split the patch.
* Add more detailed commit message.
* Add more code comment.
* Reduce modification of generic code.
* using the GNET-specific prefix.
* define a new macro for the GNET MAC.
* Use an easier way to overwrite mac.
* Removed some useless printk.
v8:
* The biggest change is according to Serge's comment in the previous
edition:
Seeing the patch in the current state would overcomplicate the generic
code and the only functions you need to update are
dwmac_dma_interrupt()
dwmac1000_dma_init_channel()
you can have these methods re-defined with all the Loongson GNET
specifics in the low-level platform driver (dwmac-loongson.c). After
that you can just override the mac_device_info.dma pointer with a
fixed stmmac_dma_ops descriptor. Here is what should be done for that:
1. Keep the Patch 4/9 with my comments fixed. First it will be partly
useful for your GNET device. Second in general it's a correct
implementation of the normal DW GMAC v3.x multi-channels feature and
will be useful for the DW GMACs with that feature enabled.
2. Create the Loongson GNET-specific
stmmac_dma_ops.dma_interrupt()
stmmac_dma_ops.init_chan()
methods in the dwmac-loongson.c driver. Don't forget to move all the
Loongson-specific macros from dwmac_dma.h to dwmac-loongson.c.
3. Create a Loongson GNET-specific platform setup method with the next
semantics:
+ allocate stmmac_dma_ops instance and initialize it with
dwmac1000_dma_ops.
+ override the stmmac_dma_ops.{dma_interrupt, init_chan} with
the pointers to the methods defined in 2.
+ allocate mac_device_info instance and initialize the
mac_device_info.dma field with a pointer to the new
stmmac_dma_ops instance.
+ call dwmac1000_setup() or initialize mac_device_info in a way
it's done in dwmac1000_setup() (the later might be better so you
wouldn't need to export the dwmac1000_setup() function).
+ override stmmac_priv.synopsys_id with a correct value.
4. Initialize plat_stmmacenet_data.setup() with the pointer to the
method created in 3.
* Others:
Re-split the patch.
Passed checkpatch.pl test.
v7:
* Refer to andrew's suggestion:
- Add DMA_INTR_ENA_NIE_RX and DMA_INTR_ENA_NIE_TX #define's, etc.
* Others:
- Using --subject-prefix="PATCH net-next vN" to indicate that the
patches are for the networking tree.
- Rebase to the latest networking tree:
<git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git>
v6:
* Refer to Serge's suggestion:
- Add new platform feature flag:
include/linux/stmmac.h:
+#define STMMAC_FLAG_HAS_LGMAC BIT(13)
- Add the IRQs macros specific to the Loongson Multi-channels GMAC:
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h:
+#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000 /* ...*/
#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
...
- Drop all of redundant changes that don't require the
prototypes being converted to accepting the stmmac_priv
pointer.
* Refer to andrew's suggestion:
- Drop white space changes.
- break patch up into lots of smaller parts.
Some small patches have been put into another series as a preparation
see <https://lore.kernel.org/loongarch/cover.1702289232.git.siyanteng@loongson.cn/T/#t>
*note* : This series of patches relies on the three small patches above.
* others
- Drop irq_flags changes.
- Changed patch order.
v4 -> v5:
* Remove an ugly and useless patch (fix channel number).
* Remove the non-standard dma64 driver code, and also remove
the HWIF entries, since the associated custom callbacks no
longer exist.
* Refer to Serge's suggestion: Update the dwmac1000_dma.c to
support the multi-DMA-channels controller setup.
See:
v4: <https://lore.kernel.org/loongarch/cover.1692696115.git.chenfeiyang@loongson.cn/>
v3: <https://lore.kernel.org/loongarch/cover.1691047285.git.chenfeiyang@loongson.cn/>
v2: <https://lore.kernel.org/loongarch/cover.1690439335.git.chenfeiyang@loongson.cn/>
v1: <https://lore.kernel.org/loongarch/cover.1689215889.git.chenfeiyang@loongson.cn/>
Yanteng Si (14):
net: stmmac: Move the atds flag to the stmmac_dma_cfg structure
net: stmmac: Add multi-channel support
net: stmmac: Export dwmac1000_dma_ops
net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size
init
net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls
net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device
identification
net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
net: stmmac: dwmac-loongson: Init ref and PTP clocks rate
net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC
net: stmmac: dwmac-loongson: Introduce PCI device info data
net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support
net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support
net: stmmac: dwmac-loongson: Add Loongson GNET support
net: stmmac: dwmac-loongson: Add loongson module author
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 572 ++++++++++++++++--
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 4 +-
.../ethernet/stmicro/stmmac/dwmac1000_dma.c | 35 +-
.../ethernet/stmicro/stmmac/dwmac100_dma.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac_dma.h | 27 +-
.../net/ethernet/stmicro/stmmac/dwmac_lib.c | 30 +-
.../ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 +-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +-
include/linux/stmmac.h | 1 +
12 files changed, 587 insertions(+), 113 deletions(-)
--
2.31.4
Powered by blists - more mailing lists