netdev - Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for wcn7850

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <96a79d97-532f-4467-a564-c7aebd5a2ca3@linaro.org>
Date: Tue, 9 Jul 2024 15:24:44 +0200
From: neil.armstrong@...aro.org
To: Bartosz Golaszewski <brgl@...ev.pl>, Marcel Holtmann
 <marcel@...tmann.org>, Luiz Augusto von Dentz <luiz.dentz@...il.com>,
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>,
 Balakrishna Godavarthi <quic_bgodavar@...cinc.com>,
 Rocky Liao <quic_rjliao@...cinc.com>, Bjorn Andersson
 <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: linux-bluetooth@...r.kernel.org, netdev@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-arm-msm@...r.kernel.org,
 Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH v3 0/6] Bluetooth: hci_qca: use the power sequencer for
 wcn7850

On 09/07/2024 14:18, Bartosz Golaszewski wrote:
> The following series extend the usage of the power sequencing subsystem
> in the hci_qca driver.
> 
> The end goal is to convert the entire driver to be exclusively pwrseq-based
> and simplify it in the process. However due to a large number of users we
> need to be careful and consider every case separately.
> 
> Right now the only model that fully uses the power sequencer is QCA6390 on
> the RB5 board. The next steps are enabling pwrseq for Bluetooth on sm8650
> and the X13s laptop. To that end we need to make wcn7850 and wcn6855 aware
> of the power sequencing but also keep backward compatibility with older
> device trees.
> 
> This series contains changes to mainline DT bindings for wcn7850, some
> refactoring of the hci_qca driver, making pwrseq the default for the two
> models mentioned above and finally modifies the device-tree for sm8650-qrd
> to correctly represent the way the Bluetooth module is powered.
> 
> I made the last patch part of this series as it has a run-time dependency
> on previous changes in it and bluetooth support on the board will break
> without them.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
> Changes in v3:
> - Add a missing break in a switch case
> - Link to v2: https://lore.kernel.org/r/20240708-hci_qca_refactor-v2-0-b6e83b3d1ca5@linaro.org
> 
> Changes in v2:
> - Fix a switch issue reported by the test bot
> - Link to v1: https://lore.kernel.org/r/20240705-hci_qca_refactor-v1-0-e2442121c13e@linaro.org
> 
> ---
> Bartosz Golaszewski (6):
>        dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
>        Bluetooth: hci_qca: schedule a devm action for disabling the clock
>        Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
>        Bluetooth: hci_qca: make pwrseq calls the default if available
>        Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
>        arm64: dts: qcom: sm8650-qrd: use the PMU to power up bluetooth
> 
>   .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 18 +++--
>   arch/arm64/boot/dts/qcom/sm8650-qrd.dts            | 28 +++----
>   drivers/bluetooth/hci_qca.c                        | 87 +++++++++++++---------
>   3 files changed, 72 insertions(+), 61 deletions(-)
> ---
> base-commit: 0b58e108042b0ed28a71cd7edf5175999955b233
> change-id: 20240704-hci_qca_refactor-0770e9931fb4
> 
> Best regards,

Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on SM8650-QRD

Still works on SM8550-QRD, and properly works with power sequencer on SM8650-QRD

Thanks,
Neil