lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240713234339.70293-4-michael.chan@broadcom.com>
Date: Sat, 13 Jul 2024 16:43:33 -0700
From: Michael Chan <michael.chan@...adcom.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	pavan.chebbi@...adcom.com,
	andrew.gospodarek@...adcom.com,
	Sreekanth Reddy <sreekanth.reddy@...adcom.com>
Subject: [PATCH net-next 3/9] bnxt_en: Support QOS and TPID settings for the SRIOV VLAN

From: Sreekanth Reddy <sreekanth.reddy@...adcom.com>

With recent changes in the .ndo_set_vf_*() guidelines, resubmitting
this patch that was reverted eariler in 2023:

c27153682eac ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN")

Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.

Remove the unused BNXT_VF_QOS flag.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@...adcom.com>
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  2 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     |  1 -
 .../net/ethernet/broadcom/bnxt/bnxt_sriov.c   | 24 ++++++++++---------
 3 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 37da16b39f77..4f9d9a1d9c88 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9191,6 +9191,8 @@ static int __bnxt_hwrm_func_qcaps(struct bnxt *bp)
 		bp->fw_cap |= BNXT_FW_CAP_HOT_RESET_IF;
 	if (BNXT_PF(bp) && (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_FW_LIVEPATCH_SUPPORTED))
 		bp->fw_cap |= BNXT_FW_CAP_LIVEPATCH;
+	if (BNXT_PF(bp) && (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_DFLT_VLAN_TPID_PCP_SUPPORTED))
+		bp->fw_cap |= BNXT_FW_CAP_DFLT_VLAN_TPID_PCP;
 	if (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_BS_V2_SUPPORTED)
 		bp->fw_cap |= BNXT_FW_CAP_BACKING_STORE_V2;
 	if (flags_ext & FUNC_QCAPS_RESP_FLAGS_EXT_TX_COAL_CMPL_CAP)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 77bd36812293..af4d9bb947b3 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1355,7 +1355,6 @@ struct bnxt_vf_info {
 	u16	vlan;
 	u16	func_qcfg_flags;
 	u32	flags;
-#define BNXT_VF_QOS		0x1
 #define BNXT_VF_SPOOFCHK	0x2
 #define BNXT_VF_LINK_FORCED	0x4
 #define BNXT_VF_LINK_UP		0x8
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index 22898d3d088b..58bd84b59f0e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -15,6 +15,7 @@
 #include <linux/if_vlan.h>
 #include <linux/interrupt.h>
 #include <linux/etherdevice.h>
+#include <net/dcbnl.h>
 #include "bnxt_hsi.h"
 #include "bnxt.h"
 #include "bnxt_hwrm.h"
@@ -196,11 +197,8 @@ int bnxt_get_vf_config(struct net_device *dev, int vf_id,
 		memcpy(&ivi->mac, vf->vf_mac_addr, ETH_ALEN);
 	ivi->max_tx_rate = vf->max_tx_rate;
 	ivi->min_tx_rate = vf->min_tx_rate;
-	ivi->vlan = vf->vlan;
-	if (vf->flags & BNXT_VF_QOS)
-		ivi->qos = vf->vlan >> VLAN_PRIO_SHIFT;
-	else
-		ivi->qos = 0;
+	ivi->vlan = vf->vlan & VLAN_VID_MASK;
+	ivi->qos = vf->vlan >> VLAN_PRIO_SHIFT;
 	ivi->spoofchk = !!(vf->flags & BNXT_VF_SPOOFCHK);
 	ivi->trusted = bnxt_is_trusted_vf(bp, vf);
 	if (!(vf->flags & BNXT_VF_LINK_FORCED))
@@ -256,21 +254,21 @@ int bnxt_set_vf_vlan(struct net_device *dev, int vf_id, u16 vlan_id, u8 qos,
 	if (bp->hwrm_spec_code < 0x10201)
 		return -ENOTSUPP;
 
-	if (vlan_proto != htons(ETH_P_8021Q))
+	if (vlan_proto != htons(ETH_P_8021Q) &&
+	    (vlan_proto != htons(ETH_P_8021AD) ||
+	     !(bp->fw_cap & BNXT_FW_CAP_DFLT_VLAN_TPID_PCP)))
 		return -EPROTONOSUPPORT;
 
 	rc = bnxt_vf_ndo_prep(bp, vf_id);
 	if (rc)
 		return rc;
 
-	/* TODO: needed to implement proper handling of user priority,
-	 * currently fail the command if there is valid priority
-	 */
-	if (vlan_id > 4095 || qos)
+	if (vlan_id >= VLAN_N_VID || qos >= IEEE_8021Q_MAX_PRIORITIES ||
+	    (!vlan_id && qos))
 		return -EINVAL;
 
 	vf = &bp->pf.vf[vf_id];
-	vlan_tag = vlan_id;
+	vlan_tag = vlan_id | (u16)qos << VLAN_PRIO_SHIFT;
 	if (vlan_tag == vf->vlan)
 		return 0;
 
@@ -279,6 +277,10 @@ int bnxt_set_vf_vlan(struct net_device *dev, int vf_id, u16 vlan_id, u8 qos,
 		req->fid = cpu_to_le16(vf->fw_fid);
 		req->dflt_vlan = cpu_to_le16(vlan_tag);
 		req->enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_VLAN);
+		if (bp->fw_cap & BNXT_FW_CAP_DFLT_VLAN_TPID_PCP) {
+			req->enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_TPID);
+			req->tpid = vlan_proto;
+		}
 		rc = hwrm_req_send(bp, req);
 		if (!rc)
 			vf->vlan = vlan_tag;
-- 
2.30.1


Download attachment "smime.p7s" of type "application/pkcs7-signature" (4209 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ