[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fyqkuw5sv746eitjccsrx2zwhfggxjfc6vhxek2th66cv2y3zp@b7s5rcrc4lmy>
Date: Thu, 18 Jul 2024 15:25:57 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Yanteng Si <siyanteng@...ngson.cn>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
chenhuacai@...nel.org, linux@...linux.org.uk, guyinggang@...ngson.cn,
netdev@...r.kernel.org, chris.chenfeiyang@...il.com, si.yanteng@...ux.dev
Subject: Re: [PATCH net-next v14 10/14] net: stmmac: dwmac-loongson:
Introduce PCI device info data
On Tue, Jul 09, 2024 at 05:37:03PM +0800, Yanteng Si wrote:
> The Loongson GNET device support is about to be added in one of the
> next commits. As another preparation for that introduce the PCI device
> info data with a setup() callback performing the device-specific
> platform data initializations. Currently it is utilized for the
> already supported Loongson GMAC device only.
>
> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
Reviewed-by: Serge Semin <fancer.lancer@...il.com>
-Serge(y)
> ---
> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index 7d3f284b9176..10b49bea8e3c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -11,6 +11,10 @@
>
> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>
> +struct stmmac_pci_info {
> + int (*setup)(struct plat_stmmacenet_data *plat);
> +};
> +
> static void loongson_default_data(struct plat_stmmacenet_data *plat)
> {
> plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
> @@ -57,9 +61,14 @@ static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
> return 0;
> }
>
> +static struct stmmac_pci_info loongson_gmac_pci_info = {
> + .setup = loongson_gmac_data,
> +};
> +
> static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> struct plat_stmmacenet_data *plat;
> + struct stmmac_pci_info *info;
> struct stmmac_resources res;
> struct device_node *np;
> int ret, i, phy_mode;
> @@ -125,10 +134,14 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
>
> pci_set_master(pdev);
>
> - loongson_gmac_data(plat);
> memset(&res, 0, sizeof(res));
> res.addr = pcim_iomap_table(pdev)[0];
>
> + info = (struct stmmac_pci_info *)id->driver_data;
> + ret = info->setup(plat);
> + if (ret)
> + goto err_disable_device;
> +
> res.irq = of_irq_get_byname(np, "macirq");
> if (res.irq < 0) {
> dev_err(&pdev->dev, "IRQ macirq not found\n");
> @@ -220,7 +233,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
> loongson_dwmac_resume);
>
> static const struct pci_device_id loongson_dwmac_id_table[] = {
> - { PCI_DEVICE_DATA(LOONGSON, GMAC, NULL) },
> + { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
> {}
> };
> MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
> --
> 2.31.4
>
Powered by blists - more mailing lists