| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7953276c-7fe6-4ead-9463-a2e28be68d69@microchip.com>
Date: Tue, 23 Jul 2024 11:04:12 +0000
From: <Parthiban.Veerasooran@...rochip.com>
To: <linux@...ler.io>
CC: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <horms@...nel.org>, <saeedm@...dia.com>,
<anthony.l.nguyen@...el.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <andrew@...n.ch>, <corbet@....net>,
<linux-doc@...r.kernel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<devicetree@...r.kernel.org>, <Horatiu.Vultur@...rochip.com>,
<ruanjinjie@...wei.com>, <Steen.Hegelund@...rochip.com>,
<vladimir.oltean@....com>, <UNGLinuxDriver@...rochip.com>,
<Thorsten.Kummermehr@...rochip.com>, <Pier.Beruto@...emi.com>,
<Selvamani.Rajagopal@...emi.com>, <Nicolas.Ferre@...rochip.com>,
<benjamin.bigler@...nformulastudent.ch>
Subject: Re: [PATCH net-next v4 11/12] microchip: lan865x: add driver support
for Microchip's LAN865X MAC-PHY
Hi Stefan,
Thanks a lot for finding this. Sure I will include the below fix in the
v5 patch series. Unfortunately the preparation of the v5 patch series
takes little more time. Will try to post v5 patch series as soon as
possible. Please keep supporting.
Best regards,
Parthiban V
On 16/07/24 11:05 am, Stefan Bigler wrote:
> [You don't often get email from linux@...ler.io. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Parthiban
>
> I'm using v4 of the driver an switched from ipv4 to ipv6.
> I recognized, that the Neighbor Discovery is not working as expected.
> The reason for this is, that the Neighbor Solicitation packet is not recived.
> This packet is sent with a Multicast MAC Address.
> When I checked the code and compared it to the documentaton the calculation of the Address Hash is not ok.
> See Chapter 6.4.6 Hash Addressing
>
> Changing the function lan865x_hash fixed the problem
>
> +static inline u32 getAddrBit(u8 addr[ETH_ALEN], u32 bit)
> +{
> + return ((addr[bit/8]) >> (bit % 8)) & 1;
> +}
> +
> static u32 lan865x_hash(u8 addr[ETH_ALEN])
> {
> - return (ether_crc(ETH_ALEN, addr) >> 26) & GENMASK(5, 0);
> + u32 hash_index = 0;
> + for (int i=0; i<6; i++)
> + {
> + u32 hash = 0;
> + for (int j=0; j<8; j++) {
> + hash ^= getAddrBit(addr, (j*6)+i);
> + }
> + hash_index |= (hash << i);
> + }
> + return hash_index;
> }
>
> also the fuction lan865x_set_specific_multicast_addr() must be fixed due to the overflow of the mask variable
>
> static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
> @@ -301,15 +315,11 @@ static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
>
> netdev_for_each_mc_addr(ha, netdev) {
> u32 bit_num = lan865x_hash(ha->addr);
> - u32 mask = BIT(bit_num);
>
> - /* 5th bit of the 6 bits hash value is used to determine which
> - * bit to set in either a high or low hash register.
> - */
> - if (bit_num & BIT(5))
> - hash_hi |= mask;
> + if (bit_num >= 32)
> + hash_hi |= (1 << (bit_num-32));
> else
> - hash_lo |= mask;
> + hash_lo |= (1 << bit_num);
> }
>
> /* Enabling specific multicast addresses */
>
> I would be great if the fix can be included in the new version 5 of your driver.
>
> Thanks a lot and best regards
> Stefan
>
>
> Am 2024-04-18T14:56:47.000+02:00 hat Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com> geschrieben:
>
>> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x
>> MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4
>> MAC integration provides the low pin count standard SPI interface to any
>> microcontroller therefore providing Ethernet functionality without
>> requiring MAC integration within the microcontroller. The LAN8650/1
>> operates as an SPI client supporting SCLK clock rates up to a maximum of
>> 25 MHz. This SPI interface supports the transfer of both data (Ethernet
>> frames) and control (register access).
>>
>> By default, the chunk data payload is 64 bytes in size. The Ethernet
>> Media Access Controller (MAC) module implements a 10 Mbps half duplex
>> Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S
>> physical layer transceiver integrated is into the LAN8650/1. The PHY and
>> MAC are connected via an internal Media Independent Interface (MII).
>>
>> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
>> ---
>> MAINTAINERS | 6 +
>> drivers/net/ethernet/microchip/Kconfig | 1 +
>> drivers/net/ethernet/microchip/Makefile | 1 +
>> .../net/ethernet/microchip/lan865x/Kconfig | 19 +
>> .../net/ethernet/microchip/lan865x/Makefile | 6 +
>> .../net/ethernet/microchip/lan865x/lan865x.c | 384 ++++++++++++++++++
>> 6 files changed, 417 insertions(+)
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/Kconfig
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/Makefile
>> create mode 100644 drivers/net/ethernet/microchip/lan865x/lan865x.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 603528948f61..f41b7f2257d2 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14374,6 +14374,12 @@ L: netdev@...r.kernel.org
>> S: Maintained
>> F: drivers/net/ethernet/microchip/lan743x_*
>>
>> +MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER
>> +M: Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
>> +L: netdev@...r.kernel.org
>> +S: Maintained
>> +F: drivers/net/ethernet/microchip/lan865x/lan865x.c
>> +
>> MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER
>> M: Arun Ramadoss <arun.ramadoss@...rochip.com>
>> R: UNGLinuxDriver@...rochip.com
>> diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
>> index 43ba71e82260..06ca79669053 100644
>> --- a/drivers/net/ethernet/microchip/Kconfig
>> +++ b/drivers/net/ethernet/microchip/Kconfig
>> @@ -56,6 +56,7 @@ config LAN743X
>> To compile this driver as a module, choose M here. The module will be
>> called lan743x.
>>
>> +source "drivers/net/ethernet/microchip/lan865x/Kconfig"
>> source "drivers/net/ethernet/microchip/lan966x/Kconfig"
>> source "drivers/net/ethernet/microchip/sparx5/Kconfig"
>> source "drivers/net/ethernet/microchip/vcap/Kconfig"
>> diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
>> index bbd349264e6f..15dfbb321057 100644
>> --- a/drivers/net/ethernet/microchip/Makefile
>> +++ b/drivers/net/ethernet/microchip/Makefile
>> @@ -9,6 +9,7 @@ obj-$(CONFIG_LAN743X) += lan743x.o
>>
>> lan743x-objs := lan743x_main.o lan743x_ethtool.o lan743x_ptp.o
>>
>> +obj-$(CONFIG_LAN865X) += lan865x/
>> obj-$(CONFIG_LAN966X_SWITCH) += lan966x/
>> obj-$(CONFIG_SPARX5_SWITCH) += sparx5/
>> obj-$(CONFIG_VCAP) += vcap/
>> diff --git a/drivers/net/ethernet/microchip/lan865x/Kconfig b/drivers/net/ethernet/microchip/lan865x/Kconfig
>> new file mode 100644
>> index 000000000000..f3d60d14e202
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/Kconfig
>> @@ -0,0 +1,19 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# Microchip LAN865x Driver Support
>> +#
>> +
>> +if NET_VENDOR_MICROCHIP
>> +
>> +config LAN865X
>> + tristate "LAN865x support"
>> + depends on SPI
>> + depends on OA_TC6
>> + help
>> + Support for the Microchip LAN8650/1 Rev.B1 MACPHY Ethernet chip. It
>> + uses OPEN Alliance 10BASE-T1x Serial Interface specification.
>> +
>> + To compile this driver as a module, choose M here. The module will be
>> + called lan865x.
>> +
>> +endif # NET_VENDOR_MICROCHIP
>> diff --git a/drivers/net/ethernet/microchip/lan865x/Makefile b/drivers/net/ethernet/microchip/lan865x/Makefile
>> new file mode 100644
>> index 000000000000..9f5dd89c1eb8
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/Makefile
>> @@ -0,0 +1,6 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# Makefile for the Microchip LAN865x Driver
>> +#
>> +
>> +obj-$(CONFIG_LAN865X) += lan865x.o
>> diff --git a/drivers/net/ethernet/microchip/lan865x/lan865x.c b/drivers/net/ethernet/microchip/lan865x/lan865x.c
>> new file mode 100644
>> index 000000000000..9abefa8b9d9f
>> --- /dev/null
>> +++ b/drivers/net/ethernet/microchip/lan865x/lan865x.c
>> @@ -0,0 +1,384 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Microchip's LAN865x 10BASE-T1S MAC-PHY driver
>> + *
>> + * Author: Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/phy.h>
>> +#include <linux/oa_tc6.h>
>> +
>> +#define DRV_NAME "lan865x"
>> +
>> +/* MAC Network Control Register */
>> +#define LAN865X_REG_MAC_NET_CTL 0x00010000
>> +#define MAC_NET_CTL_TXEN BIT(3) /* Transmit Enable */
>> +#define MAC_NET_CTL_RXEN BIT(2) /* Receive Enable */
>> +
>> +#define LAN865X_REG_MAC_NET_CFG 0x00010001 /* MAC Network Configuration Reg */
>> +#define MAC_NET_CFG_PROMISCUOUS_MODE BIT(4)
>> +#define MAC_NET_CFG_MULTICAST_MODE BIT(6)
>> +#define MAC_NET_CFG_UNICAST_MODE BIT(7)
>> +
>> +#define LAN865X_REG_MAC_L_HASH 0x00010020 /* MAC Hash Register Bottom */
>> +#define LAN865X_REG_MAC_H_HASH 0x00010021 /* MAC Hash Register Top */
>> +#define LAN865X_REG_MAC_L_SADDR1 0x00010022 /* MAC Specific Addr 1 Bottom Reg */
>> +#define LAN865X_REG_MAC_H_SADDR1 0x00010023 /* MAC Specific Addr 1 Top Reg */
>> +
>> +/* OPEN Alliance Configuration Register #0 */
>> +#define OA_TC6_REG_CONFIG0 0x0004
>> +#define CONFIG0_ZARFE_ENABLE BIT(12)
>> +
>> +struct lan865x_priv {
>> + struct work_struct multicast_work;
>> + struct net_device *netdev;
>> + struct spi_device *spi;
>> + struct oa_tc6 *tc6;
>> +};
>> +
>> +static int lan865x_set_hw_macaddr_low_bytes(struct oa_tc6 *tc6, const u8 *mac)
>> +{
>> + u32 regval;
>> +
>> + regval = (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) | mac[0];
>> +
>> + return oa_tc6_write_register(tc6, LAN865X_REG_MAC_L_SADDR1, regval);
>> +}
>> +
>> +static int lan865x_set_hw_macaddr(struct lan865x_priv *priv, const u8 *mac)
>> +{
>> + int restore_ret;
>> + u32 regval;
>> + int ret;
>> +
>> + /* Configure MAC address low bytes */
>> + ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6, mac);
>> + if (ret)
>> + return ret;
>> +
>> + /* Prepare and configure MAC address high bytes */
>> + regval = (mac[5] << 8) | mac[4];
>> + ret = oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_SADDR1, regval);
>> + if (!ret)
>> + return 0;
>> +
>> + /* Restore the old MAC address low bytes from netdev if the new MAC
>> + * address high bytes setting failed.
>> + */
>> + restore_ret = lan865x_set_hw_macaddr_low_bytes(priv->tc6,
>> + priv->netdev->dev_addr);
>> + if (restore_ret)
>> + return restore_ret;
>> +
>> + return ret;
>> +}
>> +
>> +static void
>> +lan865x_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
>> +{
>> + strscpy(info->driver, DRV_NAME, sizeof(info->driver));
>> + strscpy(info->bus_info, dev_name(netdev->dev.parent),
>> + sizeof(info->bus_info));
>> +}
>> +
>> +static const struct ethtool_ops lan865x_ethtool_ops = {
>> + .get_drvinfo = lan865x_get_drvinfo,
>> + .get_link_ksettings = phy_ethtool_get_link_ksettings,
>> + .set_link_ksettings = phy_ethtool_set_link_ksettings,
>> +};
>> +
>> +static int lan865x_set_mac_address(struct net_device *netdev, void *addr)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + struct sockaddr *address = addr;
>> + int ret;
>> +
>> + ret = eth_prepare_mac_addr_change(netdev, addr);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (ether_addr_equal(address->sa_data, netdev->dev_addr))
>> + return 0;
>> +
>> + ret = lan865x_set_hw_macaddr(priv, address->sa_data);
>> + if (ret)
>> + return ret;
>> +
>> + eth_hw_addr_set(netdev, address->sa_data);
>> +
>> + return 0;
>> +}
>> +
>> +static u32 lan865x_hash(u8 addr[ETH_ALEN])
>> +{
>> + return (ether_crc(ETH_ALEN, addr) >> 26) & GENMASK(5, 0);
>> +}
>> +
>> +static void lan865x_set_specific_multicast_addr(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + struct netdev_hw_addr *ha;
>> + u32 hash_lo = 0;
>> + u32 hash_hi = 0;
>> +
>> + netdev_for_each_mc_addr(ha, netdev) {
>> + u32 bit_num = lan865x_hash(ha->addr);
>> + u32 mask = BIT(bit_num);
>> +
>> + /* 5th bit of the 6 bits hash value is used to determine which
>> + * bit to set in either a high or low hash register.
>> + */
>> + if (bit_num & BIT(5))
>> + hash_hi |= mask;
>> + else
>> + hash_lo |= mask;
>> + }
>> +
>> + /* Enabling specific multicast addresses */
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, hash_hi)) {
>> + netdev_err(netdev, "Failed to write reg_hashh");
>> + return;
>> + }
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, hash_lo))
>> + netdev_err(netdev, "Failed to write reg_hashl");
>> +}
>> +
>> +static void lan865x_multicast_work_handler(struct work_struct *work)
>> +{
>> + struct lan865x_priv *priv = container_of(work, struct lan865x_priv,
>> + multicast_work);
>> + u32 regval = 0;
>> +
>> + if (priv->netdev->flags & IFF_PROMISC) {
>> + /* Enabling promiscuous mode */
>> + regval |= MAC_NET_CFG_PROMISCUOUS_MODE;
>> + regval &= (~MAC_NET_CFG_MULTICAST_MODE);
>> + regval &= (~MAC_NET_CFG_UNICAST_MODE);
>> + } else if (priv->netdev->flags & IFF_ALLMULTI) {
>> + /* Enabling all multicast mode */
>> + regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
>> + regval |= MAC_NET_CFG_MULTICAST_MODE;
>> + regval &= (~MAC_NET_CFG_UNICAST_MODE);
>> + } else if (!netdev_mc_empty(priv->netdev)) {
>> + lan865x_set_specific_multicast_addr(priv->netdev);
>> + regval &= (~MAC_NET_CFG_PROMISCUOUS_MODE);
>> + regval &= (~MAC_NET_CFG_MULTICAST_MODE);
>> + regval |= MAC_NET_CFG_UNICAST_MODE;
>> + } else {
>> + /* enabling local mac address only */
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_H_HASH, 0)) {
>> + netdev_err(priv->netdev, "Failed to write reg_hashh");
>> + return;
>> + }
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_L_HASH, 0)) {
>> + netdev_err(priv->netdev, "Failed to write reg_hashl");
>> + return;
>> + }
>> + }
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CFG, regval))
>> + netdev_err(priv->netdev,
>> + "Failed to enable promiscuous/multicast/normal mode");
>> +}
>> +
>> +static void lan865x_set_multicast_list(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> +
>> + schedule_work(&priv->multicast_work);
>> +}
>> +
>> +static netdev_tx_t lan865x_send_packet(struct sk_buff *skb,
>> + struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> +
>> + return oa_tc6_start_xmit(priv->tc6, skb);
>> +}
>> +
>> +static int lan865x_hw_disable(struct lan865x_priv *priv)
>> +{
>> + u32 regval;
>> +
>> + if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
>> + return -ENODEV;
>> +
>> + regval &= ~(MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN);
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_net_close(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + int ret;
>> +
>> + netif_stop_queue(netdev);
>> + phy_stop(netdev->phydev);
>> + ret = lan865x_hw_disable(priv);
>> + if (ret) {
>> + netdev_err(netdev, "Failed to disable the hardware: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_hw_enable(struct lan865x_priv *priv)
>> +{
>> + u32 regval;
>> +
>> + if (oa_tc6_read_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, ®val))
>> + return -ENODEV;
>> +
>> + regval |= MAC_NET_CTL_TXEN | MAC_NET_CTL_RXEN;
>> +
>> + if (oa_tc6_write_register(priv->tc6, LAN865X_REG_MAC_NET_CTL, regval))
>> + return -ENODEV;
>> +
>> + return 0;
>> +}
>> +
>> +static int lan865x_net_open(struct net_device *netdev)
>> +{
>> + struct lan865x_priv *priv = netdev_priv(netdev);
>> + int ret;
>> +
>> + ret = lan865x_hw_enable(priv);
>> + if (ret) {
>> + netdev_err(netdev, "Failed to enable hardware: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + phy_start(netdev->phydev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct net_device_ops lan865x_netdev_ops = {
>> + .ndo_open = lan865x_net_open,
>> + .ndo_stop = lan865x_net_close,
>> + .ndo_start_xmit = lan865x_send_packet,
>> + .ndo_set_rx_mode = lan865x_set_multicast_list,
>> + .ndo_set_mac_address = lan865x_set_mac_address,
>> +};
>> +
>> +static int lan865x_set_zarfe(struct lan865x_priv *priv)
>> +{
>> + u32 regval;
>> + int ret;
>> +
>> + ret = oa_tc6_read_register(priv->tc6, OA_TC6_REG_CONFIG0, ®val);
>> + if (ret)
>> + return ret;
>> +
>> + /* Set Zero-Align Receive Frame Enable */
>> + regval |= CONFIG0_ZARFE_ENABLE;
>> +
>> + return oa_tc6_write_register(priv->tc6, OA_TC6_REG_CONFIG0, regval);
>> +}
>> +
>> +static int lan865x_probe(struct spi_device *spi)
>> +{
>> + struct net_device *netdev;
>> + struct lan865x_priv *priv;
>> + int ret;
>> +
>> + netdev = alloc_etherdev(sizeof(struct lan865x_priv));
>> + if (!netdev)
>> + return -ENOMEM;
>> +
>> + priv = netdev_priv(netdev);
>> + priv->netdev = netdev;
>> + priv->spi = spi;
>> + spi_set_drvdata(spi, priv);
>> + INIT_WORK(&priv->multicast_work, lan865x_multicast_work_handler);
>> +
>> + priv->tc6 = oa_tc6_init(spi, netdev);
>> + if (!priv->tc6) {
>> + ret = -ENODEV;
>> + goto free_netdev;
>> + }
>> +
>> + /* As per the point s3 in the below errata, SPI receive Ethernet frame
>> + * transfer may halt when starting the next frame in the same data block
>> + * (chunk) as the end of a previous frame. The RFA field should be
>> + * configured to 01b or 10b for proper operation. In these modes, only
>> + * one receive Ethernet frame will be placed in a single data block.
>> + * When the RFA field is written to 01b, received frames will be forced
>> + * to only start in the first word of the data block payload (SWO=0). As
>> + * recommended, ZARFE bit in the OPEN Alliance CONFIG0 register is set
>> + * to 1 for proper operation.
>> + *
>> + * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/Errata/LAN8650-1-Errata-80001075.pdf
>> + */
>> + ret = lan865x_set_zarfe(priv);
>> + if (ret) {
>> + dev_err(&spi->dev, "Failed to set ZARFE: %d\n", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + /* Get the MAC address from the SPI device tree node */
>> + if (device_get_ethdev_address(&spi->dev, netdev))
>> + eth_hw_addr_random(netdev);
>> +
>> + ret = lan865x_set_hw_macaddr(priv, netdev->dev_addr);
>> + if (ret) {
>> + dev_err(&spi->dev, "Failed to configure MAC: %d\n", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + netdev->if_port = IF_PORT_10BASET;
>> + netdev->irq = spi->irq;
>> + netdev->netdev_ops = &lan865x_netdev_ops;
>> + netdev->ethtool_ops = &lan865x_ethtool_ops;
>> +
>> + ret = register_netdev(netdev);
>> + if (ret) {
>> + dev_err(&spi->dev, "Register netdev failed (ret = %d)", ret);
>> + goto oa_tc6_exit;
>> + }
>> +
>> + return 0;
>> +
>> +oa_tc6_exit:
>> + oa_tc6_exit(priv->tc6);
>> +free_netdev:
>> + free_netdev(priv->netdev);
>> + return ret;
>> +}
>> +
>> +static void lan865x_remove(struct spi_device *spi)
>> +{
>> + struct lan865x_priv *priv = spi_get_drvdata(spi);
>> +
>> + cancel_work_sync(&priv->multicast_work);
>> + unregister_netdev(priv->netdev);
>> + oa_tc6_exit(priv->tc6);
>> + free_netdev(priv->netdev);
>> +}
>> +
>> +static const struct of_device_id lan865x_dt_ids[] = {
>> + { .compatible = "microchip,lan8651", "microchip,lan8650" },
>> + { /* Sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, lan865x_dt_ids);
>> +
>> +static struct spi_driver lan865x_driver = {
>> + .driver = {
>> + .name = DRV_NAME,
>> + .of_match_table = lan865x_dt_ids,
>> + },
>> + .probe = lan865x_probe,
>> + .remove = lan865x_remove,
>> +};
>> +module_spi_driver(lan865x_driver);
>> +
>> +MODULE_DESCRIPTION(DRV_NAME " 10Base-T1S MACPHY Ethernet Driver");
>> +MODULE_AUTHOR("Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.34.1
>
Powered by blists - more mailing lists