Message-ID: <f40312b1-8ac7-973b-5519-ee185eec8560@amd.com>
Date: Wed, 24 Jul 2024 09:24:40 +0100
From: Alejandro Lucero Palau <alucerop@....com>
To: "Li, Ming4" <ming4.li@...el.com>, alejandro.lucero-palau@....com,
 linux-cxl@...r.kernel.org, netdev@...r.kernel.org, dan.j.williams@...el.com,
 martin.habets@...inx.com, edward.cree@....com, davem@...emloft.net,
 kuba@...nel.org, pabeni@...hat.com, edumazet@...gle.com,
 richard.hughes@....com
Subject: Re: [PATCH v2 09/15] cxl: define a driver interface for HPA free
 space enumaration


On 7/16/24 07:06, Li, Ming4 wrote:
> On 7/16/2024 1:28 AM, alejandro.lucero-palau@....com wrote:
>> From: Alejandro Lucero <alucerop@....com>
>>
>> CXL region creation involves allocating capacity from device DPA
>> (device-physical-address space) and assigning it to decode a given HPA
>> (host-physical-address space). Before determining how much DPA to
>> allocate the amount of available HPA must be determined. Also, not all
>> HPA is create equal, some specifically targets RAM, some target PMEM,
>> some is prepared for device-memory flows like HDM-D and HDM-DB, and some
>> is host-only (HDM-H).
>>
>> Wrap all of those concerns into an API that retrieves a root decoder
>> (platform CXL window) that fits the specified constraints and the
>> capacity available for a new region.
>>
>> Based on https://lore.kernel.org/linux-cxl/168592149709.1948938.8663425987110396027.stgit@dwillia2-xfh.jf.intel.com/T/#m6fbe775541da3cd477d65fa95c8acdc347345b4f
>>
>> Signed-off-by: Alejandro Lucero <alucerop@....com>
>> Co-developed-by: Dan Williams <dan.j.williams@...el.com>
>> ---
>>   drivers/cxl/core/region.c          | 161 +++++++++++++++++++++++++++++
>>   drivers/cxl/cxl.h                  |   3 +
>>   drivers/cxl/cxlmem.h               |   5 +
>>   drivers/net/ethernet/sfc/efx_cxl.c |  14 +++
>>   include/linux/cxl_accel_mem.h      |   9 ++
>>   5 files changed, 192 insertions(+)
>>
>> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
>> index 538ebd5a64fd..ca464bfef77b 100644
>> --- a/drivers/cxl/core/region.c
>> +++ b/drivers/cxl/core/region.c
>> @@ -702,6 +702,167 @@ static int free_hpa(struct cxl_region *cxlr)
>>   	return 0;
>>   }
>>   
>> +
>> +struct cxlrd_max_context {
>> +	struct device * const *host_bridges;
>> +	int interleave_ways;
>> +	unsigned long flags;
>> +	resource_size_t max_hpa;
>> +	struct cxl_root_decoder *cxlrd;
>> +};
>> +
>> +static int find_max_hpa(struct device *dev, void *data)
>> +{
>> +	struct cxlrd_max_context *ctx = data;
>> +	struct cxl_switch_decoder *cxlsd;
>> +	struct cxl_root_decoder *cxlrd;
>> +	struct resource *res, *prev;
>> +	struct cxl_decoder *cxld;
>> +	resource_size_t max;
>> +	int found;
>> +
>> +	if (!is_root_decoder(dev))
>> +		return 0;
>> +
>> +	cxlrd = to_cxl_root_decoder(dev);
>> +	cxld = &cxlrd->cxlsd.cxld;
>> +	if ((cxld->flags & ctx->flags) != ctx->flags) {
>> +		dev_dbg(dev, "find_max_hpa, flags not matching: %08lx vs %08lx\n",
>> +			      cxld->flags, ctx->flags);
>> +		return 0;
>> +	}
>> +
>> +	/* A Host bridge could have more interleave ways than an
>> +	 * endpoint, couldn´t it?
>> +	 *
>> +	 * What does interleave ways mean here in terms of the requestor?
>> +	 * Why the FFMWS has 0 interleave ways but root port has 1?
>> +	 */
>> +	if (cxld->interleave_ways != ctx->interleave_ways) {
>> +		dev_dbg(dev, "find_max_hpa, interleave_ways  not matching\n");
>> +		return 0;
>> +	}
>> +
>> +	cxlsd = &cxlrd->cxlsd;
>> +
>> +	guard(rwsem_read)(&cxl_region_rwsem);
>> +	found = 0;
>> +	for (int i = 0; i < ctx->interleave_ways; i++)
>> +		for (int j = 0; j < ctx->interleave_ways; j++)
>> +			if (ctx->host_bridges[i] ==
>> +					cxlsd->target[j]->dport_dev) {
>> +				found++;
>> +				break;
>> +			}
>> +
>> +	if (found != ctx->interleave_ways) {
>> +		dev_dbg(dev, "find_max_hpa, no interleave_ways found\n");
>> +		return 0;
>> +	}
>> +
>> +	/*
>> +	 * Walk the root decoder resource range relying on cxl_region_rwsem to
>> +	 * preclude sibling arrival/departure and find the largest free space
>> +	 * gap.
>> +	 */
>> +	lockdep_assert_held_read(&cxl_region_rwsem);
>> +	max = 0;
>> +	res = cxlrd->res->child;
>> +	if (!res)
>> +		max = resource_size(cxlrd->res);
>> +	else
>> +		max = 0;
>> +
>> +	for (prev = NULL; res; prev = res, res = res->sibling) {
>> +		struct resource *next = res->sibling;
>> +		resource_size_t free = 0;
>> +
>> +		if (!prev && res->start > cxlrd->res->start) {
>> +			free = res->start - cxlrd->res->start;
>> +			max = max(free, max);
>> +		}
>> +		if (prev && res->start > prev->end + 1) {
>> +			free = res->start - prev->end + 1;
>> +			max = max(free, max);
>> +		}
>> +		if (next && res->end + 1 < next->start) {
>> +			free = next->start - res->end + 1;
>> +			max = max(free, max);
>> +		}
>> +		if (!next && res->end + 1 < cxlrd->res->end + 1) {
>> +			free = cxlrd->res->end + 1 - res->end + 1;
>> +			max = max(free, max);
>> +		}
>> +	}
>> +
>> +	if (max > ctx->max_hpa) {
>> +		if (ctx->cxlrd)
>> +			put_device(CXLRD_DEV(ctx->cxlrd));
>> +		get_device(CXLRD_DEV(cxlrd));
>> +		ctx->cxlrd = cxlrd;
>> +		ctx->max_hpa = max;
>> +		dev_info(CXLRD_DEV(cxlrd), "found %pa bytes of free space\n", &max);
>> +	}
>> +	return 0;
>> +}
>> +
>> +/**
>> + * cxl_get_hpa_freespace - find a root decoder with free capacity per constraints
>> + * @endpoint: an endpoint that is mapped by the returned decoder
>> + * @interleave_ways: number of entries in @host_bridges
>> + * @flags: CXL_DECODER_F flags for selecting RAM vs PMEM, and HDM-H vs HDM-D[B]
>> + * @max: output parameter of bytes available in the returned decoder
>> + *
>> + * The return tuple of a 'struct cxl_root_decoder' and 'bytes available (@max)'
>> + * is a point in time snapshot. If by the time the caller goes to use this root
>> + * decoder's capacity the capacity is reduced then caller needs to loop and
>> + * retry.
>> + *
>> + * The returned root decoder has an elevated reference count that needs to be
>> + * put with put_device(cxlrd_dev(cxlrd)). Locking context is with
>> + * cxl_{acquire,release}_endpoint(), that ensures removal of the root decoder
>> + * does not race.
>> + */
>> +struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_port *endpoint,
>> +					       int interleave_ways,
>> +					       unsigned long flags,
>> +					       resource_size_t *max)
>> +{
>> +
>> +	struct cxlrd_max_context ctx = {
>> +		.host_bridges = &endpoint->host_bridge,
>> +		.interleave_ways = interleave_ways,
>> +		.flags = flags,
>> +	};
>> +	struct cxl_port *root_port;
>> +	struct cxl_root *root;
>> +
>> +	if (!is_cxl_endpoint(endpoint)) {
>> +		dev_dbg(&endpoint->dev, "hpa requestor is not an endpoint\n");
>> +		return ERR_PTR(-EINVAL);
>> +	}
>> +
>> +	root = find_cxl_root(endpoint);
> Could use scope-based resource management  __free() here to drop below put_device(&root_port->dev);
>
> e.g. struct cxl_root *cxl_root __free(put_cxl_root) = find_cxl_root(endpoint);
>

I need to admit not familiar yet with scope-based macros, but I think 
these are different things. The scope of the pointer is inside this 
function, but the data referenced is likely to persist.


  get_device, inside find_cxl_root, is needed to avoid the 
device-related data disappearing while referenced by the code inside 
this function, and at the time of put_device, the data will be freed if 
ref counter reaches 0. Am I missing something?


>> +	if (!root) {
>> +		dev_dbg(&endpoint->dev, "endpoint can not be related to a root port\n");
>> +		return ERR_PTR(-ENXIO);
>> +	}
>> +
>> +	root_port = &root->port;
>> +	down_read(&cxl_region_rwsem);
>> +	device_for_each_child(&root_port->dev, &ctx, find_max_hpa);
>> +	up_read(&cxl_region_rwsem);
>> +	put_device(&root_port->dev);
>> +
>> +	if (!ctx.cxlrd)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	*max = ctx.max_hpa;
>> +	return ctx.cxlrd;
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_get_hpa_freespace, CXL);
>> +
>> +
>>   static ssize_t size_store(struct device *dev, struct device_attribute *attr,
>>   			  const char *buf, size_t len)
>>   {
>> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
>> index 9973430d975f..d3fdd2c1e066 100644
>> --- a/drivers/cxl/cxl.h
>> +++ b/drivers/cxl/cxl.h
>> @@ -770,6 +770,9 @@ struct cxl_decoder *to_cxl_decoder(struct device *dev);
>>   struct cxl_root_decoder *to_cxl_root_decoder(struct device *dev);
>>   struct cxl_switch_decoder *to_cxl_switch_decoder(struct device *dev);
>>   struct cxl_endpoint_decoder *to_cxl_endpoint_decoder(struct device *dev);
>> +
>> +#define CXLRD_DEV(cxlrd) &cxlrd->cxlsd.cxld.dev
>> +
>>   bool is_root_decoder(struct device *dev);
>>   bool is_switch_decoder(struct device *dev);
>>   bool is_endpoint_decoder(struct device *dev);
>> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
>> index 8f2a820bd92d..a0e0795ec064 100644
>> --- a/drivers/cxl/cxlmem.h
>> +++ b/drivers/cxl/cxlmem.h
>> @@ -877,4 +877,9 @@ struct cxl_hdm {
>>   struct seq_file;
>>   struct dentry *cxl_debugfs_create_dir(const char *dir);
>>   void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
>> +struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_port *endpoint,
>> +					       int interleave_ways,
>> +					       unsigned long flags,
>> +					       resource_size_t *max);
>> +
>>   #endif /* __CXL_MEM_H__ */
>> diff --git a/drivers/net/ethernet/sfc/efx_cxl.c b/drivers/net/ethernet/sfc/efx_cxl.c
>> index 2cf4837ddfc1..6d49571ccff7 100644
>> --- a/drivers/net/ethernet/sfc/efx_cxl.c
>> +++ b/drivers/net/ethernet/sfc/efx_cxl.c
>> @@ -22,6 +22,7 @@ void efx_cxl_init(struct efx_nic *efx)
>>   {
>>   	struct pci_dev *pci_dev = efx->pci_dev;
>>   	struct efx_cxl *cxl = efx->cxl;
>> +	resource_size_t max = 0;
>>   	struct resource res;
>>   	u16 dvsec;
>>   
>> @@ -74,6 +75,19 @@ void efx_cxl_init(struct efx_nic *efx)
>>   	if (IS_ERR(cxl->endpoint))
>>   		pci_info(pci_dev, "CXL accel acquire endpoint failed");
>>   
>> +	cxl->cxlrd = cxl_get_hpa_freespace(cxl->endpoint, 1,
>> +					    CXL_DECODER_F_RAM | CXL_DECODER_F_TYPE2,
>> +					    &max);
>> +
>> +	if (IS_ERR(cxl->cxlrd)) {
>> +		pci_info(pci_dev, "CXL accel get HPA failed");
>> +		goto out;
>> +	}
>> +
>> +	if (max < EFX_CTPIO_BUFFER_SIZE)
>> +		pci_info(pci_dev, "CXL accel not enough free HPA space %llu < %u\n",
>> +				  max, EFX_CTPIO_BUFFER_SIZE);
>> +out:
>>   	cxl_release_endpoint(cxl->cxlmd, cxl->endpoint);
>>   }
>>   
>> diff --git a/include/linux/cxl_accel_mem.h b/include/linux/cxl_accel_mem.h
>> index 701910021df8..f3e77688ffe0 100644
>> --- a/include/linux/cxl_accel_mem.h
>> +++ b/include/linux/cxl_accel_mem.h
>> @@ -6,6 +6,10 @@
>>   #ifndef __CXL_ACCEL_MEM_H
>>   #define __CXL_ACCEL_MEM_H
>>   
>> +#define CXL_DECODER_F_RAM   BIT(0)
>> +#define CXL_DECODER_F_PMEM  BIT(1)
>> +#define CXL_DECODER_F_TYPE2 BIT(2)
>> +
>>   enum accel_resource{
>>   	CXL_ACCEL_RES_DPA,
>>   	CXL_ACCEL_RES_RAM,
>> @@ -32,4 +36,9 @@ struct cxl_memdev *devm_cxl_add_memdev(struct device *host,
>>   
>>   struct cxl_port *cxl_acquire_endpoint(struct cxl_memdev *cxlmd);
>>   void cxl_release_endpoint(struct cxl_memdev *cxlmd, struct cxl_port *endpoint);
>> +
>> +struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_port *endpoint,
>> +					       int interleave_ways,
>> +					       unsigned long flags,
>> +					       resource_size_t *max);
>>   #endif
>

Powered by blists - more mailing lists