[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZqeApCpnq0752ZG4@shell.armlinux.org.uk>
Date: Mon, 29 Jul 2024 12:44:36 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>
Cc: "Frank.Sae" <Frank.Sae@...or-comm.com>, hkallweit1@...il.com,
davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
yuanlai.cui@...or-comm.com, hua.sun@...or-comm.com,
xiaoyong.li@...or-comm.com, suting.hu@...or-comm.com,
jie.han@...or-comm.com
Subject: Re: [PATCH 2/2] net: phy: Add driver for Motorcomm yt8821 2.5G
ethernet phy
On Sat, Jul 27, 2024 at 01:36:25PM +0200, Andrew Lunn wrote:
> The idea of this phydev->possible_interfaces is to allow the core to
> figure out what mode is most appropriate. So i would drop the mode in
> DT, default to auto, and let the core tell you it wants 2500 BaseX if
> that is all the MAC can do.
phydev->possible_interfaces reports the bitmap of interfaces that the
PHY _will_ switch between on its MAC facing side depending on the
negotiated media-side link.
It would be nice if this driver always filled in
phydev->possible_interfaces, even if there is only one interface
when it's using rate matching.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists