lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240729193527.376077-1-shenwei.wang@nxp.com>
Date: Mon, 29 Jul 2024 14:35:27 -0500
From: Shenwei Wang <shenwei.wang@....com>
To: Wei Fang <wei.fang@....com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Shenwei Wang <shenwei.wang@....com>,
	Clark Wang <xiaoning.wang@....com>,
	imx@...ts.linux.dev,
	netdev@...r.kernel.org,
	linux-imx@....com
Subject: [PATCH v2 net-next resent] net: fec: Enable SOC specific rx-usecs coalescence default setting

The current FEC driver uses a single default rx-usecs coalescence setting
across all SoCs. This approach leads to suboptimal latency on newer, high
performance SoCs such as i.MX8QM and i.MX8M.

For example, the following are the ping result on a i.MX8QXP board:

$ ping 192.168.0.195
PING 192.168.0.195 (192.168.0.195) 56(84) bytes of data.
64 bytes from 192.168.0.195: icmp_seq=1 ttl=64 time=1.32 ms
64 bytes from 192.168.0.195: icmp_seq=2 ttl=64 time=1.31 ms
64 bytes from 192.168.0.195: icmp_seq=3 ttl=64 time=1.33 ms
64 bytes from 192.168.0.195: icmp_seq=4 ttl=64 time=1.33 ms

The current default rx-usecs value of 1000us was originally optimized for
CPU-bound systems like i.MX2x and i.MX6x. However, for i.MX8 and later
generations, CPU performance is no longer a limiting factor. Consequently,
the rx-usecs value should be reduced to enhance receive latency.

The following are the ping result with the 100us setting:

$ ping 192.168.0.195
PING 192.168.0.195 (192.168.0.195) 56(84) bytes of data.
64 bytes from 192.168.0.195: icmp_seq=1 ttl=64 time=0.554 ms
64 bytes from 192.168.0.195: icmp_seq=2 ttl=64 time=0.499 ms
64 bytes from 192.168.0.195: icmp_seq=3 ttl=64 time=0.502 ms
64 bytes from 192.168.0.195: icmp_seq=4 ttl=64 time=0.486 ms

Performance testing using iperf revealed no noticeable impact on
network throughput or CPU utilization.

Signed-off-by: Shenwei Wang <shenwei.wang@....com>
---
Changes in V2:
- improved the commit comments and removed the fix tag per Andrew's feedback

 drivers/net/ethernet/freescale/fec_main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a923cb95cdc6..13c663dbf7b1 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -99,6 +99,7 @@ static const u16 fec_enet_vlan_pri_to_queue[8] = {0, 0, 1, 1, 1, 2, 2, 2};

 struct fec_devinfo {
 	u32 quirks;
+	unsigned int rx_time_itr;
 };

 static const struct fec_devinfo fec_imx25_info = {
@@ -159,6 +160,7 @@ static const struct fec_devinfo fec_imx8mq_info = {
 		  FEC_QUIRK_CLEAR_SETUP_MII | FEC_QUIRK_HAS_MULTI_QUEUES |
 		  FEC_QUIRK_HAS_EEE | FEC_QUIRK_WAKEUP_FROM_INT2 |
 		  FEC_QUIRK_HAS_MDIO_C45,
+	.rx_time_itr = 100,
 };

 static const struct fec_devinfo fec_imx8qm_info = {
@@ -169,6 +171,7 @@ static const struct fec_devinfo fec_imx8qm_info = {
 		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE |
 		  FEC_QUIRK_CLEAR_SETUP_MII | FEC_QUIRK_HAS_MULTI_QUEUES |
 		  FEC_QUIRK_DELAYED_CLKS_SUPPORT | FEC_QUIRK_HAS_MDIO_C45,
+	.rx_time_itr = 100,
 };

 static const struct fec_devinfo fec_s32v234_info = {
@@ -4027,8 +4030,9 @@ static int fec_enet_init(struct net_device *ndev)
 #endif
 	fep->rx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
 	fep->tx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
-	fep->rx_time_itr = FEC_ITR_ICTT_DEFAULT;
 	fep->tx_time_itr = FEC_ITR_ICTT_DEFAULT;
+	if (fep->rx_time_itr == 0)
+		fep->rx_time_itr = FEC_ITR_ICTT_DEFAULT;

 	/* Check mask of the streaming and coherent API */
 	ret = dma_set_mask_and_coherent(&fep->pdev->dev, DMA_BIT_MASK(32));
@@ -4325,8 +4329,10 @@ fec_probe(struct platform_device *pdev)
 	dev_info = device_get_match_data(&pdev->dev);
 	if (!dev_info)
 		dev_info = (const struct fec_devinfo *)pdev->id_entry->driver_data;
-	if (dev_info)
+	if (dev_info) {
 		fep->quirks = dev_info->quirks;
+		fep->rx_time_itr = dev_info->rx_time_itr;
+	}

 	fep->netdev = ndev;
 	fep->num_rx_queues = num_rx_qs;
--
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ