netdev - [PATCH net-next v2 0/6] net: phy: add Applied Micro QT2025 PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240731042136.201327-1-fujita.tomonori@gmail.com>
Date: Wed, 31 Jul 2024 13:21:30 +0900
From: FUJITA Tomonori <fujita.tomonori@...il.com>
To: netdev@...r.kernel.org
Cc: rust-for-linux@...r.kernel.org,
	andrew@...n.ch,
	tmgross@...ch.edu,
	miguel.ojeda.sandonis@...il.com,
	benno.lossin@...ton.me
Subject: [PATCH net-next v2 0/6] net: phy: add Applied Micro QT2025 PHY driver

This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.

The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable.

The 2-5th patches update the PHYLIB Rust bindings. Note that 4th and
5th patches are already reviewed by Trevor and Benno.

QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).

The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.

The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.

v2:
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/all/20240415104701.4772-1-fujita.tomonori@gmail.com/

FUJITA Tomonori (6):
  rust: sizes: add commonly used constants
  rust: net::phy support probe callback
  rust: net::phy implement AsRef<kernel::device::Device> trait
  rust: net::phy unified read/write API for C22 and C45 registers
  rust: net::phy unified genphy_read_status function for C22 and C45
    registers
  net: phy: add Applied Micro QT2025 PHY driver

 MAINTAINERS                      |   8 ++
 drivers/net/phy/Kconfig          |   6 +
 drivers/net/phy/Makefile         |   1 +
 drivers/net/phy/ax88796b_rust.rs |   7 +-
 drivers/net/phy/qt2025.rs        |  92 +++++++++++++
 rust/kernel/lib.rs               |   1 +
 rust/kernel/net/phy.rs           |  77 ++++++-----
 rust/kernel/net/phy/reg.rs       | 219 +++++++++++++++++++++++++++++++
 rust/kernel/sizes.rs             |  26 ++++
 rust/uapi/uapi_helper.h          |   1 +
 10 files changed, 400 insertions(+), 38 deletions(-)
 create mode 100644 drivers/net/phy/qt2025.rs
 create mode 100644 rust/kernel/net/phy/reg.rs
 create mode 100644 rust/kernel/sizes.rs

base-commit: 0a658d088cc63745528cf0ec8a2c2df0f37742d9
-- 
2.34.1