[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240802031822.1862030-1-jitendra.vegiraju@broadcom.com>
Date: Thu, 1 Aug 2024 20:18:19 -0700
From: jitendra.vegiraju@...adcom.com
To: netdev@...r.kernel.org
Cc: alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
mcoquelin.stm32@...il.com,
jitendra.vegiraju@...adcom.com,
bcm-kernel-feedback-list@...adcom.com,
richardcochran@...il.com,
ast@...nel.org,
daniel@...earbox.net,
hawk@...nel.org,
john.fastabend@...il.com,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
bpf@...r.kernel.org,
andrew@...n.ch,
linux@...linux.org.uk,
horms@...nel.org,
florian.fainelli@...adcom.com
Subject: [PATCH net-next v3 0/3] net: stmmac: Add PCI driver support for BCM8958x
From: Jitendra Vegiraju <jitendra.vegiraju@...adcom.com>
This patchset adds basic PCI ethernet device driver support for Broadcom
BCM8958x Automotive Ethernet switch SoC devices.
This SoC device has PCIe ethernet MAC attached to an integrated ethernet
switch using XGMII interface. The PCIe ethernet controller is presented to
the Linux host as PCI network device.
The following block diagram gives an overview of the application.
+=================================+
| Host CPU/Linux |
+=================================+
|| PCIe
||
+==========================================+
| +--------------+ |
| | PCIE Endpoint| |
| | Ethernet | |
| | Controller | |
| | DMA | |
| +--------------+ |
| | MAC | BCM8958X |
| +--------------+ SoC |
| || XGMII |
| || |
| +--------------+ |
| | Ethernet | |
| | switch | |
| +--------------+ |
| || || || || |
+==========================================+
|| || || || More external interfaces
The MAC block on BCM8958x is based on Synopsis XGMAC 4.00a core. This
driver uses common dwxgmac2 code where applicable.
Driver functionality specific to this MAC is implemented in dwxgmac4.c.
Management of integrated ethernet switch on this SoC is not handled by
the PCIe interface.
This SoC device has PCIe ethernet MAC directly attached to an integrated
ethernet switch using XGMII interface.
v2->v3:
Addressed v2 comments from Andrew, Jakub, Russel and Simon.
Based on suggestion by Russel and Andrew, added software node to create
phylink in fixed-link mode.
Moved dwxgmac4 specific functions to new files dwxgmac4.c and dwxgmac4.h
in stmmac core module.
Reorganized the code to use the existing glue logic support for xgmac in
hwif.c and override ops functions for dwxgmac4 specific functions.
The patch is split into three parts.
Patch#1 Adds dma_ops for dwxgmac4 in stmmac core
Patch#2 Hooks in the hardware interface handling for dwxgmac4
Patch#3 Adds PCI driver for BCM8958x device
v1->v2:
Minor fixes to address coding style issues.
Sent v2 too soon by mistake, without waiting for review comments.
Received feedback on this version.
https://lore.kernel.org/netdev/20240511015924.41457-1-jitendra.vegiraju@broadcom.com/
v1:
https://lore.kernel.org/netdev/20240510000331.154486-1-jitendra.vegiraju@broadcom.com/
Jitendra Vegiraju (3):
Add basic dwxgmac4 support to stmmac core
Integrate dwxgmac4 into stmmac hwif handling
Add PCI driver support for BCM8958x
MAINTAINERS | 8 +
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 +
drivers/net/ethernet/stmicro/stmmac/Makefile | 3 +-
drivers/net/ethernet/stmicro/stmmac/common.h | 4 +
.../net/ethernet/stmicro/stmmac/dwmac-brcm.c | 517 ++++++++++++++++++
.../ethernet/stmicro/stmmac/dwxgmac2_dma.c | 31 ++
.../net/ethernet/stmicro/stmmac/dwxgmac4.c | 142 +++++
.../net/ethernet/stmicro/stmmac/dwxgmac4.h | 84 +++
drivers/net/ethernet/stmicro/stmmac/hwif.c | 26 +-
drivers/net/ethernet/stmicro/stmmac/hwif.h | 1 +
10 files changed, 825 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-brcm.c
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwxgmac4.c
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwxgmac4.h
--
2.34.1
Powered by blists - more mailing lists