[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240804233835.223460-5-fujita.tomonori@gmail.com>
Date: Mon, 5 Aug 2024 08:38:33 +0900
From: FUJITA Tomonori <fujita.tomonori@...il.com>
To: netdev@...r.kernel.org
Cc: rust-for-linux@...r.kernel.org,
andrew@...n.ch,
tmgross@...ch.edu,
miguel.ojeda.sandonis@...il.com,
benno.lossin@...ton.me,
aliceryhl@...gle.com
Subject: [PATCH net-next v3 4/6] rust: net::phy unified read/write API for C22 and C45 registers
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@...il.com>
Reviewed-by: Trevor Gross <tmgross@...ch.edu>
Reviewed-by: Benno Lossin <benno.lossin@...ton.me>
---
MAINTAINERS | 1 +
drivers/net/phy/ax88796b_rust.rs | 7 +-
rust/kernel/net/phy.rs | 31 ++---
rust/kernel/net/phy/reg.rs | 193 +++++++++++++++++++++++++++++++
rust/uapi/uapi_helper.h | 1 +
5 files changed, 206 insertions(+), 27 deletions(-)
create mode 100644 rust/kernel/net/phy/reg.rs
diff --git a/MAINTAINERS b/MAINTAINERS
index 8766f3e5e87e..f0639034ef96 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8354,6 +8354,7 @@ L: netdev@...r.kernel.org
L: rust-for-linux@...r.kernel.org
S: Maintained
F: rust/kernel/net/phy.rs
+F: rust/kernel/net/phy/reg.rs
EXEC & BINFMT API, ELF
R: Eric Biederman <ebiederm@...ssion.com>
diff --git a/drivers/net/phy/ax88796b_rust.rs b/drivers/net/phy/ax88796b_rust.rs
index 5c92572962dc..8c7eb009d9fc 100644
--- a/drivers/net/phy/ax88796b_rust.rs
+++ b/drivers/net/phy/ax88796b_rust.rs
@@ -6,7 +6,7 @@
//! C version of this driver: [`drivers/net/phy/ax88796b.c`](./ax88796b.c)
use kernel::{
c_str,
- net::phy::{self, DeviceId, Driver},
+ net::phy::{self, reg::C22, DeviceId, Driver},
prelude::*,
uapi,
};
@@ -24,7 +24,6 @@
license: "GPL",
}
-const MII_BMCR: u16 = uapi::MII_BMCR as u16;
const BMCR_SPEED100: u16 = uapi::BMCR_SPEED100 as u16;
const BMCR_FULLDPLX: u16 = uapi::BMCR_FULLDPLX as u16;
@@ -33,7 +32,7 @@
// Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
// such as used on the Individual Computers' X-Surf 100 Zorro card.
fn asix_soft_reset(dev: &mut phy::Device) -> Result {
- dev.write(uapi::MII_BMCR as u16, 0)?;
+ dev.write(C22::BMCR, 0)?;
dev.genphy_soft_reset()
}
@@ -55,7 +54,7 @@ fn read_status(dev: &mut phy::Device) -> Result<u16> {
}
// If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
// linkmode so use MII_BMCR as default values.
- let ret = dev.read(MII_BMCR)?;
+ let ret = dev.read(C22::BMCR)?;
if ret & BMCR_SPEED100 != 0 {
dev.set_speed(uapi::SPEED_100);
diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index bd9fc7a84cd4..60e30e7b3f41 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -9,6 +9,8 @@
use crate::{error::*, prelude::*, types::Opaque};
use core::{marker::PhantomData, ptr::addr_of_mut};
+pub mod reg;
+
/// PHY state machine states.
///
/// Corresponds to the kernel's [`enum phy_state`].
@@ -174,32 +176,15 @@ pub fn set_duplex(&mut self, mode: DuplexMode) {
unsafe { (*phydev).duplex = v };
}
- /// Reads a given C22 PHY register.
+ /// Reads a PHY register.
// This function reads a hardware register and updates the stats so takes `&mut self`.
- pub fn read(&mut self, regnum: u16) -> Result<u16> {
- let phydev = self.0.get();
- // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
- // So it's just an FFI call, open code of `phy_read()` with a valid `phy_device` pointer
- // `phydev`.
- let ret = unsafe {
- bindings::mdiobus_read((*phydev).mdio.bus, (*phydev).mdio.addr, regnum.into())
- };
- if ret < 0 {
- Err(Error::from_errno(ret))
- } else {
- Ok(ret as u16)
- }
+ pub fn read<R: reg::Register>(&mut self, reg: R) -> Result<u16> {
+ reg.read(self)
}
- /// Writes a given C22 PHY register.
- pub fn write(&mut self, regnum: u16, val: u16) -> Result {
- let phydev = self.0.get();
- // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`.
- // So it's just an FFI call, open code of `phy_write()` with a valid `phy_device` pointer
- // `phydev`.
- to_result(unsafe {
- bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, regnum.into(), val)
- })
+ /// Writes a PHY register.
+ pub fn write<R: reg::Register>(&mut self, reg: R, val: u16) -> Result {
+ reg.write(self, val)
}
/// Reads a paged register.
diff --git a/rust/kernel/net/phy/reg.rs b/rust/kernel/net/phy/reg.rs
new file mode 100644
index 000000000000..91f73179315e
--- /dev/null
+++ b/rust/kernel/net/phy/reg.rs
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+
+// Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@...il.com>
+
+//! PHY register interfaces.
+//!
+//! This module provides support for accessing PHY registers via Ethernet
+//! management interface clause 22 and 45, as defined in IEEE 802.3.
+
+use super::Device;
+use crate::build_assert;
+use crate::error::*;
+use crate::uapi;
+
+mod private {
+ /// Marker that a trait cannot be implemented outside of this crate
+ pub trait Sealed {}
+}
+
+/// Accesses PHY registers.
+///
+/// This trait is used to implement the unified interface to access
+/// C22 and C45 PHY registers.
+///
+/// # Examples
+///
+/// ```ignore
+/// fn link_change_notify(dev: &mut Device) {
+/// // read C22 BMCR register
+/// dev.read(C22::BMCR);
+/// // read C45 PMA/PMD control 1 register
+/// dev.read(C45::new(Mmd::PMAPMD, 0));
+/// }
+/// ```
+pub trait Register: private::Sealed {
+ /// Reads a PHY register.
+ fn read(&self, dev: &mut Device) -> Result<u16>;
+
+ /// Writes a PHY register.
+ fn write(&self, dev: &mut Device, val: u16) -> Result;
+}
+
+/// A single MDIO clause 22 register address (5 bits).
+pub struct C22(u8);
+
+impl C22 {
+ /// Basic mode control.
+ pub const BMCR: Self = C22(0x00);
+ /// Basic mode status.
+ pub const BMSR: Self = C22(0x01);
+ /// PHY identifier 1.
+ pub const PHYSID1: Self = C22(0x02);
+ /// PHY identifier 2.
+ pub const PHYSID2: Self = C22(0x03);
+ /// Auto-negotiation advertisement.
+ pub const ADVERTISE: Self = C22(0x04);
+ /// Auto-negotiation link partner base page ability.
+ pub const LPA: Self = C22(0x05);
+ /// Auto-negotiation expansion.
+ pub const EXPANSION: Self = C22(0x06);
+ /// Auto-negotiation next page transmit.
+ pub const NEXT_PAGE_TRANSMIT: Self = C22(0x07);
+ /// Auto-negotiation link partner received next page.
+ pub const LP_RECEIVED_NEXT_PAGE: Self = C22(0x08);
+ /// Master-slave control.
+ pub const MASTER_SLAVE_CONTROL: Self = C22(0x09);
+ /// Master-slave status.
+ pub const MASTER_SLAVE_STATUS: Self = C22(0x0a);
+ /// PSE Control.
+ pub const PSE_CONTROL: Self = C22(0x0b);
+ /// PSE Status.
+ pub const PSE_STATUS: Self = C22(0x0c);
+ /// MMD Register control.
+ pub const MMD_CONTROL: Self = C22(0x0d);
+ /// MMD Register address data.
+ pub const MMD_DATA: Self = C22(0x0e);
+ /// Extended status.
+ pub const EXTENDED_STATUS: Self = C22(0x0f);
+
+ /// Creates a new instance of `C22` with a vendor specific register.
+ pub const fn vendor_specific<const N: u8>() -> Self {
+ build_assert!(
+ N > 0x0f && N < 0x20,
+ "Vendor-specific register address must be between 16 and 31"
+ );
+ C22(N)
+ }
+}
+
+impl private::Sealed for C22 {}
+
+impl Register for C22 {
+ fn read(&self, dev: &mut Device) -> Result<u16> {
+ let phydev = dev.0.get();
+ // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+ // So it's just an FFI call, open code of `phy_read()` with a valid `phy_device` pointer
+ // `phydev`.
+ let ret = unsafe {
+ bindings::mdiobus_read((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into())
+ };
+ to_result(ret)?;
+ Ok(ret as u16)
+ }
+
+ fn write(&self, dev: &mut Device, val: u16) -> Result {
+ let phydev = dev.0.get();
+ // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+ // So it's just an FFI call, open code of `phy_write()` with a valid `phy_device` pointer
+ // `phydev`.
+ to_result(unsafe {
+ bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into(), val)
+ })
+ }
+}
+
+/// A single MDIO clause 45 register device and address.
+pub struct Mmd(u8);
+
+impl Mmd {
+ /// Physical Medium Attachment/Dependent.
+ pub const PMAPMD: Self = Mmd(uapi::MDIO_MMD_PMAPMD as u8);
+ /// WAN interface sublayer.
+ pub const WIS: Self = Mmd(uapi::MDIO_MMD_WIS as u8);
+ /// Physical coding sublayer.
+ pub const PCS: Self = Mmd(uapi::MDIO_MMD_PCS as u8);
+ /// PHY Extender sublayer.
+ pub const PHYXS: Self = Mmd(uapi::MDIO_MMD_PHYXS as u8);
+ /// DTE Extender sublayer.
+ pub const DTEXS: Self = Mmd(uapi::MDIO_MMD_DTEXS as u8);
+ /// Transmission convergence.
+ pub const TC: Self = Mmd(uapi::MDIO_MMD_TC as u8);
+ /// Auto negotiation.
+ pub const AN: Self = Mmd(uapi::MDIO_MMD_AN as u8);
+ /// Separated PMA (1).
+ pub const SEPARATED_PMA1: Self = Mmd(8);
+ /// Separated PMA (2).
+ pub const SEPARATED_PMA2: Self = Mmd(9);
+ /// Separated PMA (3).
+ pub const SEPARATED_PMA3: Self = Mmd(10);
+ /// Separated PMA (4).
+ pub const SEPARATED_PMA4: Self = Mmd(11);
+ /// OFDM PMA/PMD.
+ pub const OFDM_PMAPMD: Self = Mmd(12);
+ /// Power unit.
+ pub const POWER_UNIT: Self = Mmd(13);
+ /// Clause 22 extension.
+ pub const C22_EXT: Self = Mmd(uapi::MDIO_MMD_C22EXT as u8);
+ /// Vendor specific 1.
+ pub const VEND1: Self = Mmd(uapi::MDIO_MMD_VEND1 as u8);
+ /// Vendor specific 2.
+ pub const VEND2: Self = Mmd(uapi::MDIO_MMD_VEND2 as u8);
+}
+
+/// A single MDIO clause 45 register device and address.
+///
+/// Clause 45 uses a 5-bit device address to access a specific MMD within
+/// a port, then a 16-bit register address to access a location within
+/// that device. `C45` represents this by storing a [`Mmd`] and
+/// a register number.
+pub struct C45 {
+ devad: Mmd,
+ regnum: u16,
+}
+
+impl C45 {
+ /// Creates a new instance of `C45`.
+ pub fn new(devad: Mmd, regnum: u16) -> Self {
+ Self { devad, regnum }
+ }
+}
+
+impl private::Sealed for C45 {}
+
+impl Register for C45 {
+ fn read(&self, dev: &mut Device) -> Result<u16> {
+ let phydev = dev.0.get();
+ // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+ // So it's just an FFI call.
+ let ret =
+ unsafe { bindings::phy_read_mmd(phydev, self.devad.0.into(), self.regnum.into()) };
+ to_result(ret)?;
+ Ok(ret as u16)
+ }
+
+ fn write(&self, dev: &mut Device, val: u16) -> Result {
+ let phydev = dev.0.get();
+ // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`.
+ // So it's just an FFI call.
+ to_result(unsafe {
+ bindings::phy_write_mmd(phydev, self.devad.0.into(), self.regnum.into(), val)
+ })
+ }
+}
diff --git a/rust/uapi/uapi_helper.h b/rust/uapi/uapi_helper.h
index 08f5e9334c9e..76d3f103e764 100644
--- a/rust/uapi/uapi_helper.h
+++ b/rust/uapi/uapi_helper.h
@@ -7,5 +7,6 @@
*/
#include <uapi/asm-generic/ioctl.h>
+#include <uapi/linux/mdio.h>
#include <uapi/linux/mii.h>
#include <uapi/linux/ethtool.h>
--
2.34.1
Powered by blists - more mailing lists