[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <3013c3e019092fcab9c6b6b3de5675d2a5334da6.1722924540.git.siyanteng@loongson.cn>
Date: Tue, 6 Aug 2024 18:58:57 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
fancer.lancer@...il.com,
diasyzhang@...cent.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
Jose.Abreu@...opsys.com,
chenhuacai@...nel.org,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
chris.chenfeiyang@...il.com,
si.yanteng@...ux.dev,
Huacai Chen <chenhuacai@...ngson.cn>
Subject: [PATCH net-next v16 07/14] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
Loongson delivers two types of the network devices: Loongson GMAC and
Loongson GNET in the framework of four CPU/Chipsets revisions:
Chip Network PCI Dev ID Synopys Version DMA-channel
LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
LS2K2000 SOC GMAC 0x7a03 v3.73a 8
LS2K2000 SOC GNET 0x7a13 v3.73a 8
LS7A2000 Chipset GNET 0x7a13 v3.73a 1
The driver currently supports the chips with the Loongson GMAC network
device synthesized with a single DMA-channel available. As a
preparation before adding the Loongson GNET support detach the
Loongson GMAC-specific platform data initializations to the
loongson_gmac_data() method and preserve the common settings in the
loongson_default_data().
While at it drop the return value statement from the
loongson_default_data() method as redundant.
Note there is no intermediate vendor-specific PCS in between the MAC
and PHY on Loongson GMAC and GNET. So the plat->mac_interface field
can be freely initialized with the PHY_INTERFACE_MODE_NA value.
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
Reviewed-by: Serge Semin <fancer.lancer@...il.com>
Acked-by: Huacai Chen <chenhuacai@...ngson.cn>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index f39c13a74bb5..9b2e4bdf7cc7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -11,7 +11,7 @@
#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
@@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = 256;
+ plat->mac_interface = PHY_INTERFACE_MODE_NA;
+
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
- /* Set default number of RX and TX queues to use */
- plat->tx_queues_to_use = 1;
- plat->rx_queues_to_use = 1;
-
/* Disable Priority config by default */
plat->tx_queues_cfg[0].use_prio = false;
plat->rx_queues_cfg[0].use_prio = false;
@@ -42,6 +40,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
+}
+
+static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
+{
+ loongson_default_data(plat);
+
+ plat->tx_queues_to_use = 1;
+ plat->rx_queues_to_use = 1;
return 0;
}
@@ -111,11 +117,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
}
plat->phy_interface = phy_mode;
- plat->mac_interface = PHY_INTERFACE_MODE_GMII;
pci_set_master(pdev);
- loongson_default_data(plat);
+ loongson_gmac_data(plat);
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
--
2.31.4
Powered by blists - more mailing lists