[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240806153809.282716-4-allison.henderson@oracle.com>
Date: Tue, 6 Aug 2024 08:38:09 -0700
From: allison.henderson@...cle.com
To: netdev@...r.kernel.org
Cc: linux-kselftest@...r.kernel.org, rds-devel@....oracle.com,
linux-rdma@...r.kernel.org, oberpar@...ux.ibm.com,
chuck.lever@...cle.com, vegard.nossum@...cle.com,
Allison Henderson <allison.henderson@...cle.com>
Subject: [PATCH net-next v2 3/3] selftests: rds: add testing infrastructure
From: Vegard Nossum <vegard.nossum@...cle.com>
This adds some basic self-testing infrastructure for RDS-TCP.
Signed-off-by: Vegard Nossum <vegard.nossum@...cle.com>
Signed-off-by: Chuck Lever <chuck.lever@...cle.com>
Signed-off-by: Allison Henderson <allison.henderson@...cle.com>
---
Documentation/dev-tools/gcov.rst | 11 +
MAINTAINERS | 1 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/net/rds/Makefile | 12 +
tools/testing/selftests/net/rds/README.txt | 41 ++++
tools/testing/selftests/net/rds/config.sh | 53 +++++
tools/testing/selftests/net/rds/run.sh | 224 ++++++++++++++++++
tools/testing/selftests/net/rds/test.py | 262 +++++++++++++++++++++
8 files changed, 605 insertions(+)
diff --git a/Documentation/dev-tools/gcov.rst b/Documentation/dev-tools/gcov.rst
index 5fce2b06f229..dbd26b02ff3c 100644
--- a/Documentation/dev-tools/gcov.rst
+++ b/Documentation/dev-tools/gcov.rst
@@ -75,6 +75,17 @@ Only files which are linked to the main kernel image or are compiled as
kernel modules are supported by this mechanism.
+Module specific configs
+-----------------------
+
+Gcov kernel configs for specific modules are described below:
+
+CONFIG_GCOV_PROFILE_RDS:
+ Enables GCOV profiling on RDS for checking which functions or
+ lines are executed. This config is used by the rds selftest to
+ generate coverage reports. If left unset the report is omitted.
+
+
Files
-----
diff --git a/MAINTAINERS b/MAINTAINERS
index 8766f3e5e87e..8e0324b964f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19195,6 +19195,7 @@ S: Supported
W: https://oss.oracle.com/projects/rds/
F: Documentation/networking/rds.rst
F: net/rds/
+F: tools/testing/selftests/net/rds/
RDT - RESOURCE ALLOCATION
M: Fenghua Yu <fenghua.yu@...el.com>
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index bc8fe9e8f7f2..a5f1c0c27dff 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -68,6 +68,7 @@ TARGETS += net/mptcp
TARGETS += net/openvswitch
TARGETS += net/tcp_ao
TARGETS += net/netfilter
+TARGETS += net/rds
TARGETS += nsfs
TARGETS += perf_events
TARGETS += pidfd
diff --git a/tools/testing/selftests/net/rds/Makefile b/tools/testing/selftests/net/rds/Makefile
new file mode 100644
index 000000000000..da9714bc7aad
--- /dev/null
+++ b/tools/testing/selftests/net/rds/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+
+all:
+ @echo mk_build_dir="$(shell pwd)" > include.sh
+
+TEST_PROGS := run.sh \
+ include.sh \
+ test.py
+
+EXTRA_CLEAN := /tmp/rds_logs
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/net/rds/README.txt b/tools/testing/selftests/net/rds/README.txt
new file mode 100644
index 000000000000..cbde2951ab13
--- /dev/null
+++ b/tools/testing/selftests/net/rds/README.txt
@@ -0,0 +1,41 @@
+RDS self-tests
+==============
+
+These scripts provide a coverage test for RDS-TCP by creating two
+network namespaces and running rds packets between them. A loopback
+network is provisioned with optional probability of packet loss or
+corruption. A workload of 50000 hashes, each 64 characters in size,
+are passed over an RDS socket on this test network. A passing test means
+the RDS-TCP stack was able to recover properly. The provided config.sh
+can be used to compile the kernel with the necessary gcov options. The
+kernel may optionally be configured to omit the coverage report as well.
+
+USAGE:
+ run.sh [-d logdir] [-l packet_loss] [-c packet_corruption]
+ [-u packet_duplcate]
+
+OPTIONS:
+ -d Log directory. Defaults to tools/testing/selftests/net/rds/rds_logs
+
+ -l Simulates a percentage of packet loss
+
+ -c Simulates a percentage of packet corruption
+
+ -u Simulates a percentage of packet duplication.
+
+EXAMPLE:
+
+ # Create a suitable gcov enabled .config
+ tools/testing/selftests/net/rds/config.sh -g
+
+ # Alternatly create a gcov disabled .config
+ tools/testing/selftests/net/rds/config.sh
+
+ # build the kernel
+ vng --build --config tools/testing/selftests/net/config
+
+ # launch the tests in a VM
+ vng -v --rwdir ./ --run . --user root --cpus 4 -- \
+ "export PYTHONPATH=tools/testing/selftests/net/; tools/testing/selftests/net/rds/run.sh"
+
+An HTML coverage report will be output in tools/testing/selftests/net/rds/rds_logs/coverage/.
diff --git a/tools/testing/selftests/net/rds/config.sh b/tools/testing/selftests/net/rds/config.sh
new file mode 100755
index 000000000000..791c8dbe1095
--- /dev/null
+++ b/tools/testing/selftests/net/rds/config.sh
@@ -0,0 +1,53 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+set -e
+set -u
+set -x
+
+unset KBUILD_OUTPUT
+
+GENERATE_GCOV_REPORT=0
+while getopts "g" opt; do
+ case ${opt} in
+ g)
+ GENERATE_GCOV_REPORT=1
+ ;;
+ :)
+ echo "USAGE: config.sh [-g]"
+ exit 1
+ ;;
+ ?)
+ echo "Invalid option: -${OPTARG}."
+ exit 1
+ ;;
+ esac
+done
+
+CONF_FILE="tools/testing/selftests/net/config"
+
+# no modules
+scripts/config --file "$CONF_FILE" --disable CONFIG_MODULES
+
+# enable RDS
+scripts/config --file "$CONF_FILE" --enable CONFIG_RDS
+scripts/config --file "$CONF_FILE" --enable CONFIG_RDS_TCP
+
+if [ "$GENERATE_GCOV_REPORT" -eq 1 ]; then
+ # instrument RDS and only RDS
+ scripts/config --file "$CONF_FILE" --enable CONFIG_GCOV_KERNEL
+ scripts/config --file "$CONF_FILE" --disable GCOV_PROFILE_ALL
+ scripts/config --file "$CONF_FILE" --enable GCOV_PROFILE_RDS
+else
+ scripts/config --file "$CONF_FILE" --disable CONFIG_GCOV_KERNEL
+ scripts/config --file "$CONF_FILE" --disable GCOV_PROFILE_ALL
+ scripts/config --file "$CONF_FILE" --disable GCOV_PROFILE_RDS
+fi
+
+# need network namespaces to run tests with veth network interfaces
+scripts/config --file "$CONF_FILE" --enable CONFIG_NET_NS
+scripts/config --file "$CONF_FILE" --enable CONFIG_VETH
+
+# simulate packet loss
+scripts/config --file "$CONF_FILE" --enable CONFIG_NET_SCH_NETEM
+
diff --git a/tools/testing/selftests/net/rds/run.sh b/tools/testing/selftests/net/rds/run.sh
new file mode 100755
index 000000000000..8aee244f582a
--- /dev/null
+++ b/tools/testing/selftests/net/rds/run.sh
@@ -0,0 +1,224 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+set -e
+set -u
+
+unset KBUILD_OUTPUT
+
+current_dir="$(realpath "$(dirname "$0")")"
+build_dir="$current_dir"
+
+build_include="$current_dir/include.sh"
+if test -f "$build_include"; then
+ # this include will define "$mk_build_dir" as the location the test was
+ # built. We will need this if the tests are installed in a location
+ # other than the kernel source
+
+ source "$build_include"
+ build_dir="$mk_build_dir"
+fi
+
+# This test requires kernel source and the *.gcda data therein
+# Locate the top level of the kernel source, and the net/rds
+# subfolder with the appropriate *.gcno object files
+ksrc_dir="$(realpath "$build_dir"/../../../../../)"
+kconfig="$ksrc_dir/.config"
+obj_dir="$ksrc_dir/net/rds"
+
+GCOV_CMD=gcov
+
+#check to see if the host has the required packages to generate a gcov report
+check_gcov_env()
+{
+ if ! which "$GCOV_CMD" > /dev/null 2>&1; then
+ echo "Warning: Could not find gcov. "
+ GENERATE_GCOV_REPORT=0
+ return
+ fi
+
+ # the gcov version must match the gcc version
+ GCC_VER=$(gcc -dumpfullversion)
+ GCOV_VER=$($GCOV_CMD -v | grep gcov | awk '{print $3}'| awk 'BEGIN {FS="-"}{print $1}')
+ if [ "$GCOV_VER" != "$GCC_VER" ]; then
+ #attempt to find a matching gcov version
+ GCOV_CMD=gcov-$(gcc -dumpversion)
+
+ if ! which "$GCOV_CMD" > /dev/null 2>&1; then
+ echo "Warning: Could not find an appropriate gcov installation. \
+ gcov version must match gcc version"
+ GENERATE_GCOV_REPORT=0
+ return
+ fi
+
+ #recheck version number of found gcov executable
+ GCOV_VER=$($GCOV_CMD -v | grep gcov | awk '{print $3}'| \
+ awk 'BEGIN {FS="-"}{print $1}')
+ if [ "$GCOV_VER" != "$GCC_VER" ]; then
+ echo "Warning: Could not find an appropriate gcov installation. \
+ gcov version must match gcc version"
+ GENERATE_GCOV_REPORT=0
+ else
+ echo "Warning: Mismatched gcc and gcov detected. Using $GCOV_CMD"
+ fi
+ fi
+}
+
+# Check to see if the kconfig has the required configs to generate a coverage report
+check_gcov_conf()
+{
+ if ! grep -x "CONFIG_GCOV_PROFILE_RDS=y" "$kconfig" > /dev/null 2>&1; then
+ echo "INFO: CONFIG_GCOV_PROFILE_RDS should be enabled for coverage reports"
+ GENERATE_GCOV_REPORT=0
+ fi
+ if ! grep -x "CONFIG_GCOV_KERNEL=y" "$kconfig" > /dev/null 2>&1; then
+ echo "INFO: CONFIG_GCOV_KERNEL should be enabled for coverage reports"
+ GENERATE_GCOV_REPORT=0
+ fi
+ if grep -x "CONFIG_GCOV_PROFILE_ALL=y" "$kconfig" > /dev/null 2>&1; then
+ echo "INFO: CONFIG_GCOV_PROFILE_ALL should be disabled for coverage reports"
+ GENERATE_GCOV_REPORT=0
+ fi
+
+ if [ "$GENERATE_GCOV_REPORT" -eq 0 ]; then
+ echo "To enable gcov reports, please run "\
+ "\"tools/testing/selftests/net/rds/config.sh -g\" and rebuild the kernel"
+ else
+ # if we have the required kernel configs, proceed to check the environment to
+ # ensure we have the required gcov packages
+ check_gcov_env
+ fi
+}
+
+# Kselftest framework requirement - SKIP code is 4.
+check_conf_enabled() {
+ if ! grep -x "$1=y" "$kconfig" > /dev/null 2>&1; then
+ echo "selftests: [SKIP] This test requires $1 enabled"
+ echo "Please run tools/testing/selftests/net/rds/config.sh and rebuild the kernel"
+ exit 4
+ fi
+}
+check_conf_disabled() {
+ if grep -x "$1=y" "$kconfig" > /dev/null 2>&1; then
+ echo "selftests: [SKIP] This test requires $1 disabled"
+ echo "Please run tools/testing/selftests/net/rds/config.sh and rebuild the kernel"
+ exit 4
+ fi
+}
+check_conf() {
+ check_conf_enabled CONFIG_NET_SCH_NETEM
+ check_conf_enabled CONFIG_VETH
+ check_conf_enabled CONFIG_NET_NS
+ check_conf_enabled CONFIG_RDS_TCP
+ check_conf_enabled CONFIG_RDS
+ check_conf_disabled CONFIG_MODULES
+}
+
+check_env()
+{
+ if ! test -d "$obj_dir"; then
+ echo "selftests: [SKIP] This test requires a kernel source tree"
+ exit 4
+ fi
+ if ! test -e "$kconfig"; then
+ echo "selftests: [SKIP] This test requires a configured kernel source tree"
+ exit 4
+ fi
+ if ! which strace > /dev/null 2>&1; then
+ echo "selftests: [SKIP] Could not run test without strace"
+ exit 4
+ fi
+ if ! which tcpdump > /dev/null 2>&1; then
+ echo "selftests: [SKIP] Could not run test without tcpdump"
+ exit 4
+ fi
+
+ if ! which python3 > /dev/null 2>&1; then
+ echo "selftests: [SKIP] Could not run test without python3"
+ exit 4
+ fi
+
+ python_major=$(python3 -c "import sys; print(sys.version_info[0])")
+ python_minor=$(python3 -c "import sys; print(sys.version_info[1])")
+ if [[ python_major -lt 3 || ( python_major -eq 3 && python_minor -lt 9 ) ]] ; then
+ echo "selftests: [SKIP] Could not run test without at least python3.9"
+ python3 -V
+ exit 4
+ fi
+}
+
+LOG_DIR="$current_dir"/rds_logs
+PLOSS=0
+PCORRUPT=0
+PDUP=0
+GENERATE_GCOV_REPORT=1
+while getopts "d:l:c:u:" opt; do
+ case ${opt} in
+ d)
+ LOG_DIR=${OPTARG}
+ ;;
+ l)
+ PLOSS=${OPTARG}
+ ;;
+ c)
+ PCORRUPT=${OPTARG}
+ ;;
+ u)
+ PDUP=${OPTARG}
+ ;;
+ :)
+ echo "USAGE: run.sh [-d logdir] [-l packet_loss] [-c packet_corruption]" \
+ "[-u packet_duplcate] [-g]"
+ exit 1
+ ;;
+ ?)
+ echo "Invalid option: -${OPTARG}."
+ exit 1
+ ;;
+ esac
+done
+
+
+check_env
+check_conf
+check_gcov_conf
+
+
+rm -fr "$LOG_DIR"
+TRACE_FILE="${LOG_DIR}/rds-strace.txt"
+COVR_DIR="${LOG_DIR}/coverage/"
+mkdir -p "$LOG_DIR"
+mkdir -p "$COVR_DIR"
+
+set +e
+echo running RDS tests...
+echo Traces will be logged to "$TRACE_FILE"
+rm -f "$TRACE_FILE"
+strace -T -tt -o "$TRACE_FILE" python3 "$(dirname "$0")/test.py" --timeout 400 -d "$LOG_DIR" \
+ -l "$PLOSS" -c "$PCORRUPT" -u "$PDUP"
+
+test_rc=$?
+dmesg > "${LOG_DIR}/dmesg.out"
+
+if [ "$GENERATE_GCOV_REPORT" -eq 1 ]; then
+ echo saving coverage data...
+ (set +x; cd /sys/kernel/debug/gcov; find ./* -name '*.gcda' | \
+ while read -r f
+ do
+ cat < "/sys/kernel/debug/gcov/$f" > "/$f"
+ done)
+
+ echo running gcovr...
+ gcovr -s --html-details --gcov-executable "$GCOV_CMD" --gcov-ignore-parse-errors \
+ -o "${COVR_DIR}/gcovr" "${ksrc_dir}/net/rds/"
+else
+ echo "Coverage report will be skipped"
+fi
+
+if [ "$test_rc" -eq 0 ]; then
+ echo "PASS: Test completed successfully"
+else
+ echo "FAIL: Test failed"
+fi
+
+exit "$test_rc"
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
new file mode 100644
index 000000000000..e6bb109bcead
--- /dev/null
+++ b/tools/testing/selftests/net/rds/test.py
@@ -0,0 +1,262 @@
+#! /usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+import argparse
+import ctypes
+import errno
+import hashlib
+import os
+import select
+import signal
+import socket
+import subprocess
+import sys
+import atexit
+from pwd import getpwuid
+from os import stat
+from lib.py import ip
+
+
+libc = ctypes.cdll.LoadLibrary('libc.so.6')
+setns = libc.setns
+
+net0 = 'net0'
+net1 = 'net1'
+
+veth0 = 'veth0'
+veth1 = 'veth1'
+
+# Helper function for creating a socket inside a network namespace.
+# We need this because otherwise RDS will detect that the two TCP
+# sockets are on the same interface and use the loop transport instead
+# of the TCP transport.
+def netns_socket(netns, *args):
+ u0, u1 = socket.socketpair(socket.AF_UNIX, socket.SOCK_SEQPACKET)
+
+ child = os.fork()
+ if child == 0:
+ # change network namespace
+ with open(f'/var/run/netns/{netns}') as f:
+ try:
+ ret = setns(f.fileno(), 0)
+ except IOError as e:
+ print(e.errno)
+ print(e)
+
+ # create socket in target namespace
+ s = socket.socket(*args)
+
+ # send resulting socket to parent
+ socket.send_fds(u0, [], [s.fileno()])
+
+ sys.exit(0)
+
+ # receive socket from child
+ _, s, _, _ = socket.recv_fds(u1, 0, 1)
+ os.waitpid(child, 0)
+ u0.close()
+ u1.close()
+ return socket.fromfd(s[0], *args)
+
+def signal_handler(sig, frame):
+ print('Test timed out')
+ sys.exit(1)
+
+#Parse out command line arguments. We take an optional
+# timeout parameter and an optional log output folder
+parser = argparse.ArgumentParser(description="init script args",
+ formatter_class=argparse.ArgumentDefaultsHelpFormatter)
+parser.add_argument("-d", "--logdir", action="store",
+ help="directory to store logs", default="/tmp")
+parser.add_argument('--timeout', help="timeout to terminate hung test",
+ type=int, default=0)
+parser.add_argument('-l', '--loss', help="Simulate tcp packet loss",
+ type=int, default=0)
+parser.add_argument('-c', '--corruption', help="Simulate tcp packet corruption",
+ type=int, default=0)
+parser.add_argument('-u', '--duplicate', help="Simulate tcp packet duplication",
+ type=int, default=0)
+args = parser.parse_args()
+logdir=args.logdir
+packet_loss=str(args.loss)+'%'
+packet_corruption=str(args.corruption)+'%'
+packet_duplicate=str(args.duplicate)+'%'
+
+ip(f"netns add {net0}")
+ip(f"netns add {net1}")
+ip(f"link add type veth")
+
+addrs = [
+ # we technically don't need different port numbers, but this will
+ # help identify traffic in the network analyzer
+ ('10.0.0.1', 10000),
+ ('10.0.0.2', 20000),
+]
+
+# move interfaces to separate namespaces so they can no longer be
+# bound directly; this prevents rds from switching over from the tcp
+# transport to the loop transport.
+ip(f"link set {veth0} netns {net0} up")
+ip(f"link set {veth1} netns {net1} up")
+
+
+
+# add addresses
+ip(f"-n {net0} addr add {addrs[0][0]}/32 dev {veth0}")
+ip(f"-n {net1} addr add {addrs[1][0]}/32 dev {veth1}")
+
+# add routes
+ip(f"-n {net0} route add {addrs[1][0]}/32 dev {veth0}")
+ip(f"-n {net1} route add {addrs[0][0]}/32 dev {veth1}")
+
+# sanity check that our two interfaces/addresses are correctly set up
+# and communicating by doing a single ping
+ip(f"netns exec {net0} ping -c 1 {addrs[1][0]}")
+
+# Start a packet capture on each network
+for net in [net0, net1]:
+ tcpdump_pid = os.fork()
+ if tcpdump_pid == 0:
+ pcap = logdir+'/'+net+'.pcap'
+ subprocess.check_call(['touch', pcap])
+ user = getpwuid(stat(pcap).st_uid).pw_name
+ ip(f"netns exec {net} /usr/sbin/tcpdump -Z {user} -i any -w {pcap}")
+ sys.exit(0)
+
+# simulate packet loss, duplication and corruption
+for net, iface in [(net0, veth0), (net1, veth1)]:
+ ip(f"netns exec {net} /usr/sbin/tc qdisc add dev {iface} root netem \
+ corrupt {packet_corruption} loss {packet_loss} duplicate \
+ {packet_duplicate}")
+
+# add a timeout
+if args.timeout > 0:
+ signal.alarm(args.timeout)
+ signal.signal(signal.SIGALRM, signal_handler)
+
+sockets = [
+ netns_socket(net0, socket.AF_RDS, socket.SOCK_SEQPACKET),
+ netns_socket(net1, socket.AF_RDS, socket.SOCK_SEQPACKET),
+]
+
+for s, addr in zip(sockets, addrs):
+ s.bind(addr)
+ s.setblocking(0)
+
+fileno_to_socket = {
+ s.fileno(): s for s in sockets
+}
+
+addr_to_socket = {
+ addr: s for addr, s in zip(addrs, sockets)
+}
+
+socket_to_addr = {
+ s: addr for addr, s in zip(addrs, sockets)
+}
+
+send_hashes = {}
+recv_hashes = {}
+
+ep = select.epoll()
+
+for s in sockets:
+ ep.register(s, select.EPOLLRDNORM)
+
+n = 50000
+nr_send = 0
+nr_recv = 0
+
+while nr_send < n:
+ # Send as much as we can without blocking
+ print("sending...", nr_send, nr_recv)
+ while nr_send < n:
+ send_data = hashlib.sha256(
+ f'packet {nr_send}'.encode('utf-8')).hexdigest().encode('utf-8')
+
+ # pseudo-random send/receive pattern
+ sender = sockets[nr_send % 2]
+ receiver = sockets[1 - (nr_send % 3) % 2]
+
+ try:
+ sender.sendto(send_data, socket_to_addr[receiver])
+ send_hashes.setdefault((sender.fileno(), receiver.fileno()),
+ hashlib.sha256()).update(f'<{send_data}>'.encode('utf-8'))
+ nr_send = nr_send + 1
+ except BlockingIOError as e:
+ break
+ except OSError as e:
+ if e.errno in [errno.ENOBUFS, errno.ECONNRESET, errno.EPIPE]:
+ break
+ raise
+
+ # Receive as much as we can without blocking
+ print("receiving...", nr_send, nr_recv)
+ while nr_recv < nr_send:
+ for fileno, eventmask in ep.poll():
+ receiver = fileno_to_socket[fileno]
+
+ if eventmask & select.EPOLLRDNORM:
+ while True:
+ try:
+ recv_data, address = receiver.recvfrom(1024)
+ sender = addr_to_socket[address]
+ recv_hashes.setdefault((sender.fileno(),
+ receiver.fileno()), hashlib.sha256()).update(
+ f'<{recv_data}>'.encode('utf-8'))
+ nr_recv = nr_recv + 1
+ except BlockingIOError as e:
+ break
+
+ # exercise net/rds/tcp.c:rds_tcp_sysctl_reset()
+ for net in [net0, net1]:
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_rcvbuf=10000")
+ ip(f"netns exec {net} /usr/sbin/sysctl net.rds.tcp.rds_tcp_sndbuf=10000")
+
+print("done", nr_send, nr_recv)
+
+# the Python socket module doesn't know these
+RDS_INFO_FIRST = 10000
+RDS_INFO_LAST = 10017
+
+nr_success = 0
+nr_error = 0
+
+for s in sockets:
+ for optname in range(RDS_INFO_FIRST, RDS_INFO_LAST + 1):
+ # Sigh, the Python socket module doesn't allow us to pass
+ # buffer lengths greater than 1024 for some reason. RDS
+ # wants multiple pages.
+ try:
+ s.getsockopt(socket.SOL_RDS, optname, 1024)
+ nr_success = nr_success + 1
+ except OSError as e:
+ nr_error = nr_error + 1
+ if e.errno == errno.ENOSPC:
+ # ignore
+ pass
+
+print(f"getsockopt(): {nr_success}/{nr_error}")
+
+print("Stopping network packet captures")
+subprocess.check_call(['killall', '-q', 'tcpdump'])
+
+# We're done sending and receiving stuff, now let's check if what
+# we received is what we sent.
+for (sender, receiver), send_hash in send_hashes.items():
+ recv_hash = recv_hashes.get((sender, receiver))
+
+ if recv_hash is None:
+ print("FAIL: No data received")
+ sys.exit(1)
+
+ if send_hash.hexdigest() != recv_hash.hexdigest():
+ print("FAIL: Send/recv mismatch")
+ print("hash expected:", send_hash.hexdigest())
+ print("hash received:", recv_hash.hexdigest())
+ sys.exit(1)
+
+ print(f"{sender}/{receiver}: ok")
+
+print("Success")
+sys.exit(0)
--
2.25.1
Powered by blists - more mailing lists