[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZrX9mbsJD8VLEOs6@nanopsycho.orion>
Date: Fri, 9 Aug 2024 13:29:29 +0200
From: Jiri Pirko <jiri@...nulli.us>
To: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
Cc: intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
pawel.chmielewski@...el.com, sridhar.samudrala@...el.com,
jacob.e.keller@...el.com, pio.raczynski@...il.com,
konrad.knitter@...el.com, marcin.szycik@...el.com,
wojciech.drewek@...el.com, nex.sw.ncis.nat.hpm.dev@...el.com,
przemyslaw.kitszel@...el.com
Subject: Re: [iwl-next v3 1/8] ice: devlink PF MSI-X max and min parameter
Fri, Aug 09, 2024 at 01:05:00PM CEST, michal.swiatkowski@...ux.intel.com wrote:
>On Fri, Aug 09, 2024 at 12:51:58PM +0200, Jiri Pirko wrote:
>> Fri, Aug 09, 2024 at 07:13:34AM CEST, michal.swiatkowski@...ux.intel.com wrote:
>> >On Thu, Aug 08, 2024 at 05:34:35PM +0200, Jiri Pirko wrote:
>> >> Thu, Aug 08, 2024 at 09:20:09AM CEST, michal.swiatkowski@...ux.intel.com wrote:
>> >> >Use generic devlink PF MSI-X parameter to allow user to change MSI-X
>> >> >range.
>> >> >
>> >> >Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
>> >> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@...ux.intel.com>
>> >> >---
>> >> > .../net/ethernet/intel/ice/devlink/devlink.c | 56 ++++++++++++++++++-
>> >> > drivers/net/ethernet/intel/ice/ice.h | 8 +++
>> >> > drivers/net/ethernet/intel/ice/ice_irq.c | 14 ++++-
>> >> > 3 files changed, 76 insertions(+), 2 deletions(-)
>> >> >
>> >> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c
>> >> >index 29a5f822cb8b..bdc22ea13e0f 100644
>> >> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink.c
>> >> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c
>> >> >@@ -1518,6 +1518,32 @@ static int ice_devlink_local_fwd_validate(struct devlink *devlink, u32 id,
>> >> > return 0;
>> >> > }
>> >> >
>> >> >+static int
>> >> >+ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
>> >> >+ union devlink_param_value val,
>> >> >+ struct netlink_ext_ack *extack)
>> >> >+{
>> >> >+ if (val.vu16 > ICE_MAX_MSIX) {
>> >> >+ NL_SET_ERR_MSG_MOD(extack, "PF max MSI-X is too high");
>> >>
>> >> No reason to have "PF" in the text. Also, no reason to have "max MSI-X".
>> >> That is the name of the param.
>> >>
>> >
>> >Ok, will change both, thanks.
>> >
>> >>
>> >>
>> >> >+ return -EINVAL;
>> >> >+ }
>> >> >+
>> >> >+ return 0;
>> >> >+}
>> >> >+
>> >> >+static int
>> >> >+ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
>> >> >+ union devlink_param_value val,
>> >> >+ struct netlink_ext_ack *extack)
>> >> >+{
>> >> >+ if (val.vu16 <= ICE_MIN_MSIX) {
>> >> >+ NL_SET_ERR_MSG_MOD(extack, "PF min MSI-X is too low");
>> >>
>> >> Same comment as for max goes here.
>> >>
>> >>
>> >> >+ return -EINVAL;
>> >> >+ }
>> >> >+
>> >> >+ return 0;
>> >> >+}
>> >> >+
>> >> > enum ice_param_id {
>> >> > ICE_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
>> >> > ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
>> >> >@@ -1535,6 +1561,15 @@ static const struct devlink_param ice_dvl_rdma_params[] = {
>> >> > ice_devlink_enable_iw_validate),
>> >> > };
>> >> >
>> >> >+static const struct devlink_param ice_dvl_msix_params[] = {
>> >> >+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
>> >> >+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
>> >> >+ NULL, NULL, ice_devlink_msix_max_pf_validate),
>> >> >+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
>> >> >+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
>> >> >+ NULL, NULL, ice_devlink_msix_min_pf_validate),
>> >> >+};
>> >> >+
>> >> > static const struct devlink_param ice_dvl_sched_params[] = {
>> >> > DEVLINK_PARAM_DRIVER(ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
>> >> > "tx_scheduling_layers",
>> >> >@@ -1637,6 +1672,7 @@ void ice_devlink_unregister(struct ice_pf *pf)
>> >> > int ice_devlink_register_params(struct ice_pf *pf)
>> >> > {
>> >> > struct devlink *devlink = priv_to_devlink(pf);
>> >> >+ union devlink_param_value value;
>> >> > struct ice_hw *hw = &pf->hw;
>> >> > int status;
>> >> >
>> >> >@@ -1645,11 +1681,27 @@ int ice_devlink_register_params(struct ice_pf *pf)
>> >> > if (status)
>> >> > return status;
>> >> >
>> >> >+ status = devl_params_register(devlink, ice_dvl_msix_params,
>> >> >+ ARRAY_SIZE(ice_dvl_msix_params));
>> >> >+ if (status)
>> >> >+ return status;
>> >> >+
>> >> > if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
>> >> > status = devl_params_register(devlink, ice_dvl_sched_params,
>> >> > ARRAY_SIZE(ice_dvl_sched_params));
>> >> >+ if (status)
>> >> >+ return status;
>> >> >
>> >> >- return status;
>> >> >+ value.vu16 = pf->msix.max;
>> >> >+ devl_param_driverinit_value_set(devlink,
>> >> >+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
>> >> >+ value);
>> >> >+ value.vu16 = pf->msix.min;
>> >> >+ devl_param_driverinit_value_set(devlink,
>> >> >+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
>> >> >+ value);
>> >> >+
>> >> >+ return 0;
>> >> > }
>> >> >
>> >> > void ice_devlink_unregister_params(struct ice_pf *pf)
>> >> >@@ -1659,6 +1711,8 @@ void ice_devlink_unregister_params(struct ice_pf *pf)
>> >> >
>> >> > devl_params_unregister(devlink, ice_dvl_rdma_params,
>> >> > ARRAY_SIZE(ice_dvl_rdma_params));
>> >> >+ devl_params_unregister(devlink, ice_dvl_msix_params,
>> >> >+ ARRAY_SIZE(ice_dvl_msix_params));
>> >> >
>> >> > if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
>> >> > devl_params_unregister(devlink, ice_dvl_sched_params,
>> >> >diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
>> >> >index d6f80da30dec..a67456057c77 100644
>> >> >--- a/drivers/net/ethernet/intel/ice/ice.h
>> >> >+++ b/drivers/net/ethernet/intel/ice/ice.h
>> >> >@@ -95,6 +95,7 @@
>> >> > #define ICE_MIN_LAN_TXRX_MSIX 1
>> >> > #define ICE_MIN_LAN_OICR_MSIX 1
>> >> > #define ICE_MIN_MSIX (ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
>> >> >+#define ICE_MAX_MSIX 256
>> >> > #define ICE_FDIR_MSIX 2
>> >> > #define ICE_RDMA_NUM_AEQ_MSIX 4
>> >> > #define ICE_MIN_RDMA_MSIX 2
>> >> >@@ -545,6 +546,12 @@ struct ice_agg_node {
>> >> > u8 valid;
>> >> > };
>> >> >
>> >> >+struct ice_pf_msix {
>> >> >+ u16 cur;
>> >> >+ u16 min;
>> >> >+ u16 max;
>> >> >+};
>> >> >+
>> >> > struct ice_pf {
>> >> > struct pci_dev *pdev;
>> >> > struct ice_adapter *adapter;
>> >> >@@ -615,6 +622,7 @@ struct ice_pf {
>> >> > struct msi_map ll_ts_irq; /* LL_TS interrupt MSIX vector */
>> >> > u16 max_pf_txqs; /* Total Tx queues PF wide */
>> >> > u16 max_pf_rxqs; /* Total Rx queues PF wide */
>> >> >+ struct ice_pf_msix msix;
>> >> > u16 num_lan_msix; /* Total MSIX vectors for base driver */
>> >> > u16 num_lan_tx; /* num LAN Tx queues setup */
>> >> > u16 num_lan_rx; /* num LAN Rx queues setup */
>> >> >diff --git a/drivers/net/ethernet/intel/ice/ice_irq.c b/drivers/net/ethernet/intel/ice/ice_irq.c
>> >> >index ad82ff7d1995..4e559fd6e49f 100644
>> >> >--- a/drivers/net/ethernet/intel/ice/ice_irq.c
>> >> >+++ b/drivers/net/ethernet/intel/ice/ice_irq.c
>> >> >@@ -252,7 +252,19 @@ void ice_clear_interrupt_scheme(struct ice_pf *pf)
>> >> > int ice_init_interrupt_scheme(struct ice_pf *pf)
>> >> > {
>> >> > int total_vectors = pf->hw.func_caps.common_cap.num_msix_vectors;
>> >> >- int vectors, max_vectors;
>> >> >+ union devlink_param_value value;
>> >> >+ int vectors, max_vectors, err;
>> >> >+
>> >> >+ /* load default PF MSI-X range */
>> >> >+ err = devl_param_driverinit_value_get(priv_to_devlink(pf),
>> >> >+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
>> >> >+ &value);
>> >>
>> >> If err is not 0, you have a bug in the driver. Perhaps it a about the
>> >> time to make this return void and add some WARN_ONs inside the function?
>> >>
>> >
>> >err is not 0 when this param isn't found (not registered yet). It is a
>> >case when driver is probing, I want to have here default values and
>> >register it later. Instead of checking if it is probe context or reload
>> >context I am checking if param already exists. The param doesn't exist in
>> >probe, but exists in reload.
>>
>> No, you have to make sure that you are using these values after they are
>> set. Please fix.
>>
>
>I am not using value if this function returns error. If function returns
>error default values are set. The function
>devl_param_driverinit_value_get() is already checking if parameter
>exists. Why do you want me to check it before calling this function? Do
>you mean that calling it with not registered parameters is a problem? I
>don't see why it can be a problem.
If you call this for non-existing parameter, your driver flow is wrong.
That's my point.
>
>>
>> >
>> >>
>> >> >+ pf->msix.min = err ? ICE_MIN_MSIX : value.vu16;
>> >> >+
>> >> >+ err = devl_param_driverinit_value_get(priv_to_devlink(pf),
>> >> >+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
>> >> >+ &value);
>> >> >+ pf->msix.max = err ? total_vectors / 2 : value.vu16;
>> >> >
>> >> > vectors = ice_ena_msix_range(pf);
>> >> >
>> >> >--
>> >> >2.42.0
>> >> >
Powered by blists - more mailing lists