[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <hrnq2ipnep65lx2ao4mfkyi4yy73d2w46jgevf536moqdi4jlo@moxi4zamjxws>
Date: Fri, 9 Aug 2024 20:26:19 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Yanteng Si <siyanteng@...ngson.cn>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
alexandre.torgue@...s.st.com, joabreu@...opsys.com, diasyzhang@...cent.com,
Jose.Abreu@...opsys.com, chenhuacai@...nel.org, linux@...linux.org.uk,
guyinggang@...ngson.cn, netdev@...r.kernel.org, chris.chenfeiyang@...il.com,
si.yanteng@...ux.dev, Huacai Chen <chenhuacai@...ngson.cn>
Subject: Re: [PATCH net-next v17 11/14] net: stmmac: dwmac-loongson: Add
DT-less GMAC PCI-device support
On Wed, Aug 07, 2024 at 09:48:05PM +0800, Yanteng Si wrote:
> The Loongson GMAC driver currently supports the network controllers
> installed on the LS2K1000 SoC and LS7A1000 chipset, for which the GMAC
> devices are required to be defined in the platform device tree source.
> But Loongson machines may have UEFI (implies ACPI) or PMON/UBOOT
> (implies FDT) as the system bootloaders. In order to have both system
> configurations support let's extend the driver functionality with the
> case of having the Loongson GMAC probed on the PCI bus with no device
> tree node defined for it. That requires to make the device DT-node
> optional, to rely on the IRQ line detected by the PCI core and to
> have the MDIO bus ID calculated using the PCIe Domain+BDF numbers.
>
> In order to have the device probe() and remove() methods less
> complicated let's move the DT- and ACPI-specific code to the
> respective sub-functions.
>
> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
> Acked-by: Huacai Chen <chenhuacai@...ngson.cn>
> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
No more comments from my side. Thanks.
Reviewed-by: Serge Semin <fancer.lancer@...il.com>
-Serge(y)
> ---
> .../ethernet/stmicro/stmmac/dwmac-loongson.c | 165 +++++++++++-------
> 1 file changed, 102 insertions(+), 63 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index 10b49bea8e3c..c0740a41025b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -12,11 +12,15 @@
> #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
>
> struct stmmac_pci_info {
> - int (*setup)(struct plat_stmmacenet_data *plat);
> + int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
> };
>
> -static void loongson_default_data(struct plat_stmmacenet_data *plat)
> +static void loongson_default_data(struct pci_dev *pdev,
> + struct plat_stmmacenet_data *plat)
> {
> + /* Get bus_id, this can be overwritten later */
> + plat->bus_id = pci_dev_id(pdev);
> +
> plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
> plat->has_gmac = 1;
> plat->force_sf_dma_mode = 1;
> @@ -49,9 +53,10 @@ static void loongson_default_data(struct plat_stmmacenet_data *plat)
> plat->dma_cfg->pblx8 = true;
> }
>
> -static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
> +static int loongson_gmac_data(struct pci_dev *pdev,
> + struct plat_stmmacenet_data *plat)
> {
> - loongson_default_data(plat);
> + loongson_default_data(pdev, plat);
>
> plat->tx_queues_to_use = 1;
> plat->rx_queues_to_use = 1;
> @@ -65,20 +70,85 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
> .setup = loongson_gmac_data,
> };
>
> +static int loongson_dwmac_dt_config(struct pci_dev *pdev,
> + struct plat_stmmacenet_data *plat,
> + struct stmmac_resources *res)
> +{
> + struct device_node *np = dev_of_node(&pdev->dev);
> + int ret;
> +
> + plat->mdio_node = of_get_child_by_name(np, "mdio");
> + if (plat->mdio_node) {
> + dev_info(&pdev->dev, "Found MDIO subnode\n");
> + plat->mdio_bus_data->needs_reset = true;
> + }
> +
> + ret = of_alias_get_id(np, "ethernet");
> + if (ret >= 0)
> + plat->bus_id = ret;
> +
> + res->irq = of_irq_get_byname(np, "macirq");
> + if (res->irq < 0) {
> + dev_err(&pdev->dev, "IRQ macirq not found\n");
> + ret = -ENODEV;
> + goto err_put_node;
> + }
> +
> + res->wol_irq = of_irq_get_byname(np, "eth_wake_irq");
> + if (res->wol_irq < 0) {
> + dev_info(&pdev->dev,
> + "IRQ eth_wake_irq not found, using macirq\n");
> + res->wol_irq = res->irq;
> + }
> +
> + res->lpi_irq = of_irq_get_byname(np, "eth_lpi");
> + if (res->lpi_irq < 0) {
> + dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
> + ret = -ENODEV;
> + goto err_put_node;
> + }
> +
> + ret = device_get_phy_mode(&pdev->dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "phy_mode not found\n");
> + ret = -ENODEV;
> + goto err_put_node;
> + }
> +
> + plat->phy_interface = ret;
> +
> + return 0;
> +
> +err_put_node:
> + of_node_put(plat->mdio_node);
> +
> + return ret;
> +}
> +
> +static void loongson_dwmac_dt_clear(struct pci_dev *pdev,
> + struct plat_stmmacenet_data *plat)
> +{
> + of_node_put(plat->mdio_node);
> +}
> +
> +static int loongson_dwmac_acpi_config(struct pci_dev *pdev,
> + struct plat_stmmacenet_data *plat,
> + struct stmmac_resources *res)
> +{
> + if (!pdev->irq)
> + return -EINVAL;
> +
> + res->irq = pdev->irq;
> +
> + return 0;
> +}
> +
> static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> struct plat_stmmacenet_data *plat;
> struct stmmac_pci_info *info;
> struct stmmac_resources res;
> - struct device_node *np;
> - int ret, i, phy_mode;
> -
> - np = dev_of_node(&pdev->dev);
> -
> - if (!np) {
> - pr_info("dwmac_loongson_pci: No OF node\n");
> - return -ENODEV;
> - }
> + int ret, i;
>
> plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
> if (!plat)
> @@ -90,25 +160,19 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
> if (!plat->mdio_bus_data)
> return -ENOMEM;
>
> - plat->mdio_node = of_get_child_by_name(np, "mdio");
> - if (plat->mdio_node) {
> - dev_info(&pdev->dev, "Found MDIO subnode\n");
> - plat->mdio_bus_data->needs_reset = true;
> - }
> -
> plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
> - if (!plat->dma_cfg) {
> - ret = -ENOMEM;
> - goto err_put_node;
> - }
> + if (!plat->dma_cfg)
> + return -ENOMEM;
>
> /* Enable pci device */
> ret = pci_enable_device(pdev);
> if (ret) {
> dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
> - goto err_put_node;
> + return ret;
> }
>
> + pci_set_master(pdev);
> +
> /* Get the base address of device */
> for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> if (pci_resource_len(pdev, i) == 0)
> @@ -119,59 +183,32 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
> break;
> }
>
> - plat->bus_id = of_alias_get_id(np, "ethernet");
> - if (plat->bus_id < 0)
> - plat->bus_id = pci_dev_id(pdev);
> -
> - phy_mode = device_get_phy_mode(&pdev->dev);
> - if (phy_mode < 0) {
> - dev_err(&pdev->dev, "phy_mode not found\n");
> - ret = phy_mode;
> - goto err_disable_device;
> - }
> -
> - plat->phy_interface = phy_mode;
> -
> - pci_set_master(pdev);
> -
> memset(&res, 0, sizeof(res));
> res.addr = pcim_iomap_table(pdev)[0];
>
> info = (struct stmmac_pci_info *)id->driver_data;
> - ret = info->setup(plat);
> + ret = info->setup(pdev, plat);
> if (ret)
> goto err_disable_device;
>
> - res.irq = of_irq_get_byname(np, "macirq");
> - if (res.irq < 0) {
> - dev_err(&pdev->dev, "IRQ macirq not found\n");
> - ret = -ENODEV;
> - goto err_disable_device;
> - }
> -
> - res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
> - if (res.wol_irq < 0) {
> - dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
> - res.wol_irq = res.irq;
> - }
> -
> - res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
> - if (res.lpi_irq < 0) {
> - dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
> - ret = -ENODEV;
> + if (dev_of_node(&pdev->dev))
> + ret = loongson_dwmac_dt_config(pdev, plat, &res);
> + else
> + ret = loongson_dwmac_acpi_config(pdev, plat, &res);
> + if (ret)
> goto err_disable_device;
> - }
>
> ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
> if (ret)
> - goto err_disable_device;
> + goto err_plat_clear;
>
> - return ret;
> + return 0;
>
> +err_plat_clear:
> + if (dev_of_node(&pdev->dev))
> + loongson_dwmac_dt_clear(pdev, plat);
> err_disable_device:
> pci_disable_device(pdev);
> -err_put_node:
> - of_node_put(plat->mdio_node);
> return ret;
> }
>
> @@ -181,9 +218,11 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
> struct stmmac_priv *priv = netdev_priv(ndev);
> int i;
>
> - of_node_put(priv->plat->mdio_node);
> stmmac_dvr_remove(&pdev->dev);
>
> + if (dev_of_node(&pdev->dev))
> + loongson_dwmac_dt_clear(pdev, priv->plat);
> +
> for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> if (pci_resource_len(pdev, i) == 0)
> continue;
> --
> 2.31.4
>
Powered by blists - more mailing lists