| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240809175113.3470393-1-Frank.Li@nxp.com>
Date: Fri, 9 Aug 2024 13:51:07 -0400
From: Frank Li <Frank.Li@....com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Christophe Leroy <christophe.leroy@...roup.eu>,
netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-kernel@...r.kernel.org (open list),
linuxppc-dev@...ts.ozlabs.org (open list:FREESCALE SOC DRIVERS),
linux-arm-kernel@...ts.infradead.org (moderated list:FREESCALE SOC DRIVERS)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/1] dt-bindings: soc: fsl: cpm_qe: convert network.txt to yaml
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <Frank.Li@....com>
---
This one is quite old. The detail informaiton is limited.
---
.../devicetree/bindings/net/fsl,cpm-enet.yaml | 59 ++++++++
.../devicetree/bindings/net/fsl,cpm-mdio.yaml | 55 +++++++
.../bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml | 140 ++++++++++++++++++
.../bindings/soc/fsl/cpm_qe/network.txt | 130 ----------------
4 files changed, 254 insertions(+), 130 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
new file mode 100644
index 0000000000000..da836477e8bad
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Network for cpm enet
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,cpm1-scc-enet
+ - fsl,cpm2-scc-enet
+ - fsl,cpm1-fec-enet
+ - fsl,cpm2-fcc-enet
+ - fsl,qe-enet
+ - items:
+ - enum:
+ - fsl,mpc8272-fcc-enet
+ - const: fsl,cpm2-fcc-enet
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ fsl,cpm-command:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: cpm command
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@...00 {
+ compatible = "fsl,mpc8272-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8>;
+ interrupt-parent = <&pic>;
+ phy-handle = <&phy0>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
new file mode 100644
index 0000000000000..b1791a3c490e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale CPM MDIO Device
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,pq1-fec-mdio
+ - fsl,cpm2-mdio-bitbang
+ - items:
+ - const: fsl,mpc8272ads-mdio-bitbang
+ - const: fsl,mpc8272-mdio-bitbang
+ - const: fsl,cpm2-mdio-bitbang
+
+ reg:
+ maxItems: 1
+
+ fsl,mdio-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pin of port C controlling mdio data
+
+ fsl,mdc-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: pin of port C controlling mdio clock
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio@...40 {
+ compatible = "fsl,mpc8272ads-mdio-bitbang",
+ "fsl,mpc8272-mdio-bitbang",
+ "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d40 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+ };
+
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
new file mode 100644
index 0000000000000..64ffbf75dd9d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-Level Data Link Control(HDLC)
+
+description: HDLC part in Universal communication controllers (UCCs)
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ const: fsl,ucc-hdlc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ rx-clock-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ oneOf:
+ - pattern: "^brg([0-9]|1[0-6])$"
+ - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+ tx-clock-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ oneOf:
+ - pattern: "^brg([0-9]|1[0-6])$"
+ - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+ fsl,tdm-interface:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Specify that hdlc is based on tdm-interface
+
+ fsl,rx-sync-clock:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: rx-sync
+ enum:
+ - none
+ - rsync_pin
+ - brg9
+ - brg10
+ - brg11
+ - brg13
+ - brg14
+ - brg15
+
+ fsl,tx-sync-clock:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: tx-sync
+ enum:
+ - none
+ - tsync_pin
+ - brg9
+ - brg10
+ - brg11
+ - brg13
+ - brg14
+ - brg15
+
+ fsl,tdm-framer-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: required for tdm interface
+ enum: [e1, t1]
+
+ fsl,tdm-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: number of TDM ID
+
+ fsl,tx-timeslot-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface.
+ time slot mask for TDM operation. Indicates which time
+ slots used for transmitting and receiving.
+
+ fsl,rx-timeslot-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface.
+ time slot mask for TDM operation. Indicates which time
+ slots used for transmitting and receiving.
+
+ fsl,siram-entry-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ required for tdm interface
+ Must be 0,2,4...64. the number of TDM entry.
+
+ fsl,tdm-internal-loopback:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ optional for tdm interface
+ Internal loopback connecting on TDM layer.
+
+ fsl,hmask:
+ $ref: /schemas/types.yaml#/definitions/uint16
+ description: |
+ HDLC address recognition. Set to zero to disable
+ address filtering of packets:
+ fsl,hmask = /bits/ 16 <0x0000>;
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ communication@...0 {
+ compatible = "fsl,ucc-hdlc";
+ reg = <0x2000 0x200>;
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
+
+ - |
+ communication@...0 {
+ compatible = "fsl,ucc-hdlc";
+ reg = <0x2000 0x200>;
+ rx-clock-name = "brg1";
+ tx-clock-name = "brg1";
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
deleted file mode 100644
index 6d2dd8a31482a..0000000000000
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-* Network
-
-Currently defined compatibles:
-- fsl,cpm1-scc-enet
-- fsl,cpm2-scc-enet
-- fsl,cpm1-fec-enet
-- fsl,cpm2-fcc-enet (third resource is GFEMR)
-- fsl,qe-enet
-
-Example:
-
- ethernet@...00 {
- compatible = "fsl,mpc8272-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <11300 20 8400 100 11390 1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <20 8>;
- interrupt-parent = <&PIC>;
- phy-handle = <&PHY0>;
- fsl,cpm-command = <12000300>;
- };
-
-* MDIO
-
-Currently defined compatibles:
-fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
-fsl,cpm2-mdio-bitbang (reg is port C registers)
-
-Properties for fsl,cpm2-mdio-bitbang:
-fsl,mdio-pin : pin of port C controlling mdio data
-fsl,mdc-pin : pin of port C controlling mdio clock
-
-Example:
- mdio@...40 {
- compatible = "fsl,mpc8272ads-mdio-bitbang",
- "fsl,mpc8272-mdio-bitbang",
- "fsl,cpm2-mdio-bitbang";
- reg = <10d40 14>;
- #address-cells = <1>;
- #size-cells = <0>;
- fsl,mdio-pin = <12>;
- fsl,mdc-pin = <13>;
- };
-
-* HDLC
-
-Currently defined compatibles:
-- fsl,ucc-hdlc
-
-Properties for fsl,ucc-hdlc:
-- rx-clock-name
-- tx-clock-name
- Usage: required
- Value type: <string>
- Definition : Must be "brg1"-"brg16" for internal clock source,
- Must be "clk1"-"clk24" for external clock source.
-
-- fsl,tdm-interface
- Usage: optional
- Value type: <empty>
- Definition : Specify that hdlc is based on tdm-interface
-
-The property below is dependent on fsl,tdm-interface:
-- fsl,rx-sync-clock
- Usage: required
- Value type: <string>
- Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tx-sync-clock
- Usage: required
- Value type: <string>
- Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
-
-- fsl,tdm-framer-type
- Usage: required for tdm interface
- Value type: <string>
- Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
- are not supported.
-
-- fsl,tdm-id
- Usage: required for tdm interface
- Value type: <u32>
- Definition : number of TDM ID
-
-- fsl,tx-timeslot-mask
-- fsl,rx-timeslot-mask
- Usage: required for tdm interface
- Value type: <u32>
- Definition : time slot mask for TDM operation. Indicates which time
- slots used for transmitting and receiving.
-
-- fsl,siram-entry-id
- Usage: required for tdm interface
- Value type: <u32>
- Definition : Must be 0,2,4...64. the number of TDM entry.
-
-- fsl,tdm-internal-loopback
- usage: optional for tdm interface
- value type: <empty>
- Definition : Internal loopback connecting on TDM layer.
-- fsl,hmask
- usage: optional
- Value type: <u16>
- Definition: HDLC address recognition. Set to zero to disable
- address filtering of packets:
- fsl,hmask = /bits/ 16 <0x0000>;
-
-Example for tdm interface:
-
- ucc@...0 {
- compatible = "fsl,ucc-hdlc";
- rx-clock-name = "clk8";
- tx-clock-name = "clk9";
- fsl,rx-sync-clock = "rsync_pin";
- fsl,tx-sync-clock = "tsync_pin";
- fsl,tx-timeslot-mask = <0xfffffffe>;
- fsl,rx-timeslot-mask = <0xfffffffe>;
- fsl,tdm-framer-type = "e1";
- fsl,tdm-id = <0>;
- fsl,siram-entry-id = <0>;
- fsl,tdm-interface;
- };
-
-Example for hdlc without tdm interface:
-
- ucc@...0 {
- compatible = "fsl,ucc-hdlc";
- rx-clock-name = "brg1";
- tx-clock-name = "brg1";
- };
--
2.34.1
Powered by blists - more mailing lists