lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240809-btaml-v4-0-376b284405a7@amlogic.com>
Date: Fri, 09 Aug 2024 13:42:23 +0800
From: Yang Li via B4 Relay <devnull+yang.li.amlogic.com@...nel.org>
To: Marcel Holtmann <marcel@...tmann.org>, 
 Luiz Augusto von Dentz <luiz.dentz@...il.com>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>
Cc: linux-bluetooth@...r.kernel.org, netdev@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, Yang Li <yang.li@...ogic.com>, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, 
 Ye He <ye.he@...ogic.com>
Subject: [PATCH v4 0/3] Add support for Amlogic HCI UART

Add support for Amlogic HCI UART, including dt-binding,
and Amlogic Bluetooth driver.

Signed-off-by: Yang Li <yang.li@...ogic.com>
---
Changes in v4:
- Modified the compatible list in the DT binding.
- Reduced the boot delay from 350ms to 60ms.
- Minor fixes.
- Link to v3: https://lore.kernel.org/r/20240802-btaml-v3-0-d8110bf9963f@amlogic.com

Changes in v3:
- Updated the properties within the device tree binding file.
- Remove the "antenna-number" property.
- Performed code optimization for improved efficiency and readability.
- Link to v2: https://lore.kernel.org/r/20240718-btaml-v2-0-1392b2e21183@amlogic.com

Changes in v2:
- Introduce a regulator for powering up the Bluetooth chip instead of power sequencing.
- Use the GPIO Consumer API to manipulate the GPIO pins instead of the legacy API.
- Minor fixes.
- Link to v1: https://lore.kernel.org/r/20240705-btaml-v1-0-7f1538f98cef@amlogic.com

---
Yang Li (3):
      dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
      Bluetooth: hci_uart: Add support for Amlogic HCI UART
      MAINTAINERS: Add an entry for Amlogic HCI UART (M: Yang Li)

 .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  |  63 ++
 MAINTAINERS                                        |   7 +
 drivers/bluetooth/Kconfig                          |  12 +
 drivers/bluetooth/Makefile                         |   1 +
 drivers/bluetooth/hci_aml.c                        | 755 +++++++++++++++++++++
 drivers/bluetooth/hci_ldisc.c                      |   8 +-
 drivers/bluetooth/hci_uart.h                       |   8 +-
 7 files changed, 851 insertions(+), 3 deletions(-)
---
base-commit: bd0b4dae74b0f0ee9ea37818e1c132b56a26d6dd
change-id: 20240418-btaml-f9d7b19724ab

Best regards,
-- 
Yang Li <yang.li@...ogic.com>



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ