netdev - Re: [PATCH net-next 1/4] net: xilinx: axienet: Always disable promiscuous mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240815145832.GG632411@kernel.org>
Date: Thu, 15 Aug 2024 15:58:32 +0100
From: Simon Horman <horms@...nel.org>
To: Sean Anderson <sean.anderson@...ux.dev>
Cc: Radhey Shyam Pandey <radhey.shyam.pandey@....com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Andrew Lunn <andrew@...n.ch>, Michal Simek <michal.simek@....com>,
	Daniel Borkmann <daniel@...earbox.net>,
	Paolo Abeni <pabeni@...hat.com>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	linux-arm-kernel@...ts.infradead.org,
	Jakub Kicinski <kuba@...nel.org>,
	Ariane Keller <ariane.keller@....ee.ethz.ch>
Subject: Re: [PATCH net-next 1/4] net: xilinx: axienet: Always disable
 promiscuous mode

On Mon, Aug 12, 2024 at 04:04:34PM -0400, Sean Anderson wrote:
> If prmiscuous mode is disabled when there are fewer than four multicast
> addresses, then it will to be reflected in the hardware. Fix this by
> always clearing the promiscuous mode flag even when we program multicast
> addresses.
> 
> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
> Signed-off-by: Sean Anderson <sean.anderson@...ux.dev>
> ---
> 
>  drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index ca04c298daa2..e664611c29cf 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -451,6 +451,10 @@ static void axienet_set_multicast_list(struct net_device *ndev)
>  	} else if (!netdev_mc_empty(ndev)) {
>  		struct netdev_hw_addr *ha;
>  
> +		reg = axienet_ior(lp, XAE_FMI_OFFSET);
> +		reg &= ~XAE_FMI_PM_MASK;
> +		axienet_iow(lp, XAE_FMI_OFFSET, reg);
> +

Hi Sean,

I notice that this replicates code in another part of this function.
And that is then factored out into common code as part of the last
patch of this series.

I guess that it is in the wash, but perhaps it would
be nicer to factor out the common promisc mode setting code
as part of this patch.

Otherwise, this LGTM.

>  		i = 0;
>  		netdev_for_each_mc_addr(ha, ndev) {
>  			if (i >= XAE_MULTICAST_CAM_TABLE_NUM)
> -- 
> 2.35.1.1320.gc452695387.dirty
> 
>