[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240815000707.2006121-4-vladimir.oltean@nxp.com>
Date: Thu, 15 Aug 2024 03:06:56 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Antoine Tenart <atenart@...nel.org>,
UNGLinuxDriver@...rochip.com,
Hongbo Wang <hongbo.wang@....com>,
Xiaoliang Yang <xiaoliang.yang_1@....com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Colin Foster <colin.foster@...advantage.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>,
Hangbin Liu <liuhangbin@...il.com>,
Petr Machata <petrm@...dia.com>,
Ido Schimmel <idosch@...dia.com>,
linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net 03/14] selftests: net: local_termination: parameterize test name
There are upcoming tests which verify the RX filtering of a bridge
(or bridge port), but under differing vlan_filtering conditions.
Since we currently print $h2 (the DUT) in the log_test() output, it
becomes necessary to make a further distinction between tests, to not
give the user the impression that the exact same thing is run twice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
.../net/forwarding/local_termination.sh | 38 ++++++++++---------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh
index 92f0e242d119..af284edaf401 100755
--- a/tools/testing/selftests/net/forwarding/local_termination.sh
+++ b/tools/testing/selftests/net/forwarding/local_termination.sh
@@ -68,10 +68,11 @@ send_uc_ipv4()
check_rcv()
{
- local if_name=$1
- local type=$2
- local pattern=$3
- local should_receive=$4
+ local if_name=$1; shift
+ local type=$1; shift
+ local pattern=$1; shift
+ local should_receive=$1; shift
+ local test_name="$1"; shift
local should_fail=
[ $should_receive = true ] && should_fail=0 || should_fail=1
@@ -81,7 +82,7 @@ check_rcv()
check_err_fail "$should_fail" "$?" "reception"
- log_test "$if_name: $type"
+ log_test "$test_name: $type"
}
mc_route_prepare()
@@ -106,6 +107,7 @@ run_test()
{
local send_if_name=$1; shift
local rcv_if_name=$1; shift
+ local test_name="$1"; shift
local smac=$(mac_get $send_if_name)
local rcv_dmac=$(mac_get $rcv_if_name)
@@ -150,61 +152,61 @@ run_test()
check_rcv $rcv_if_name "Unicast IPv4 to primary MAC address" \
"$smac > $rcv_dmac, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
check_rcv $rcv_if_name "Unicast IPv4 to macvlan MAC address" \
"$smac > $MACVLAN_ADDR, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
xfail_on_veth $h1 \
check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address" \
"$smac > $UNKNOWN_UC_ADDR1, ethertype IPv4 (0x0800)" \
- false
+ false "$test_name"
check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, promisc" \
"$smac > $UNKNOWN_UC_ADDR2, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
xfail_on_veth $h1 \
check_rcv $rcv_if_name \
"Unicast IPv4 to unknown MAC address, allmulti" \
"$smac > $UNKNOWN_UC_ADDR3, ethertype IPv4 (0x0800)" \
- false
+ false "$test_name"
check_rcv $rcv_if_name "Multicast IPv4 to joined group" \
"$smac > $JOINED_MACV4_MC_ADDR, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
xfail_on_veth $h1 \
check_rcv $rcv_if_name \
"Multicast IPv4 to unknown group" \
"$smac > $UNKNOWN_MACV4_MC_ADDR1, ethertype IPv4 (0x0800)" \
- false
+ false "$test_name"
check_rcv $rcv_if_name "Multicast IPv4 to unknown group, promisc" \
"$smac > $UNKNOWN_MACV4_MC_ADDR2, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
check_rcv $rcv_if_name "Multicast IPv4 to unknown group, allmulti" \
"$smac > $UNKNOWN_MACV4_MC_ADDR3, ethertype IPv4 (0x0800)" \
- true
+ true "$test_name"
check_rcv $rcv_if_name "Multicast IPv6 to joined group" \
"$smac > $JOINED_MACV6_MC_ADDR, ethertype IPv6 (0x86dd)" \
- true
+ true "$test_name"
xfail_on_veth $h1 \
check_rcv $rcv_if_name "Multicast IPv6 to unknown group" \
"$smac > $UNKNOWN_MACV6_MC_ADDR1, ethertype IPv6 (0x86dd)" \
- false
+ false "$test_name"
check_rcv $rcv_if_name "Multicast IPv6 to unknown group, promisc" \
"$smac > $UNKNOWN_MACV6_MC_ADDR2, ethertype IPv6 (0x86dd)" \
- true
+ true "$test_name"
check_rcv $rcv_if_name "Multicast IPv6 to unknown group, allmulti" \
"$smac > $UNKNOWN_MACV6_MC_ADDR3, ethertype IPv6 (0x86dd)" \
- true
+ true "$test_name"
tcpdump_cleanup $rcv_if_name
}
--
2.34.1
Powered by blists - more mailing lists