| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240816060955.47076-3-Frank.Sae@motor-comm.com>
Date: Thu, 15 Aug 2024 23:09:55 -0700
From: Frank Sae <Frank.Sae@...or-comm.com>
To: Frank.Sae@...or-comm.com,
andrew@...n.ch,
hkallweit1@...il.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
linux@...linux.org.uk
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
yuanlai.cui@...or-comm.com,
hua.sun@...or-comm.com,
xiaoyong.li@...or-comm.com,
suting.hu@...or-comm.com,
jie.han@...or-comm.com
Subject: [PATCH net-next v2 2/2] net: phy: Add driver for Motorcomm yt8821 2.5G ethernet phy
Add a driver for the motorcomm yt8821 2.5G ethernet phy. Verified the
driver on BPI-R3(with MediaTek MT7986(Filogic 830) SoC) development board,
which is developed by Guangdong Bipai Technology Co., Ltd..
yt8821 2.5G ethernet phy works in AUTO_BX2500_SGMII or FORCE_BX2500
interface, supports 2.5G/1000M/100M/10M speeds, and wol(magic package).
Signed-off-by: Frank Sae <Frank.Sae@...or-comm.com>
---
v2:
- removed motorcomm,chip-mode property in DT.
- modified the magic numbers of _SETTING macro.
- added ":" after returns in function's DOC.
- updated YTPHY_SSR_SPEED_2500M val from 0x4 ((0x0 << 14) | BIT(9)).
- yt8821gen_init_paged(phydev, YT8521_RSSR_FIBER_SPACE) and
yt8821gen_init_paged(phydev, YT8521_RSSR_UTP_SPACE) updated to
yt8821_serdes_init() and yt8821_utp_init().
- removed phydev->irq = PHY_POLL; in yt8821_config_init().
- instead of phydev_info(), phydev_dbg() used in yt8821_read_status().
- instead of __assign_bit(), __set_bit() used.
v1:
- https://lore.kernel.org/netdev/20240727091906.1108588-1-Frank.Sae@motor-comm.com/
- https://lore.kernel.org/netdev/20240727092009.1108640-1-Frank.Sae@motor-comm.com/
- https://lore.kernel.org/netdev/20240727092031.1108690-1-Frank.Sae@motor-comm.com/
---
drivers/net/phy/motorcomm.c | 680 +++++++++++++++++++++++++++++++++++-
1 file changed, 676 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index fe0aabe12622..8f91ff1647cf 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Motorcomm 8511/8521/8531/8531S PHY driver.
+ * Motorcomm 8511/8521/8531/8531S/8821 PHY driver.
*
* Author: Peter Geis <pgwipeout@...il.com>
* Author: Frank <Frank.Sae@...or-comm.com>
@@ -16,8 +16,8 @@
#define PHY_ID_YT8521 0x0000011a
#define PHY_ID_YT8531 0x4f51e91b
#define PHY_ID_YT8531S 0x4f51e91a
-
-/* YT8521/YT8531S Register Overview
+#define PHY_ID_YT8821 0x4f51ea19
+/* YT8521/YT8531S/YT8821 Register Overview
* UTP Register space | FIBER Register space
* ------------------------------------------------------------
* | UTP MII | FIBER MII |
@@ -50,6 +50,8 @@
#define YTPHY_SSR_SPEED_10M ((0x0 << 14))
#define YTPHY_SSR_SPEED_100M ((0x1 << 14))
#define YTPHY_SSR_SPEED_1000M ((0x2 << 14))
+#define YTPHY_SSR_SPEED_10G ((0x3 << 14))
+#define YTPHY_SSR_SPEED_2500M ((0x0 << 14) | BIT(9))
#define YTPHY_SSR_DUPLEX_OFFSET 13
#define YTPHY_SSR_DUPLEX BIT(13)
#define YTPHY_SSR_PAGE_RECEIVED BIT(12)
@@ -268,12 +270,89 @@
#define YT8531_SCR_CLK_SRC_REF_25M 4
#define YT8531_SCR_CLK_SRC_SSC_25M 5
+#define YT8821_SDS_EXT_CSR_CTRL_REG 0x23
+#define YT8821_SDS_EXT_CSR_VCO_LDO_EN BIT(15)
+#define YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN BIT(8)
+
+#define YT8821_UTP_EXT_PI_CTRL_REG 0x56
+#define YT8821_UTP_EXT_PI_RST_N_FIFO BIT(5)
+#define YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE BIT(4)
+#define YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE BIT(3)
+#define YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE BIT(2)
+#define YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE BIT(1)
+#define YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE BIT(0)
+
+#define YT8821_UTP_EXT_VCT_CFG6_CTRL_REG 0x97
+#define YT8821_UTP_EXT_FECHO_AMP_TH_HUGE GENMASK(15, 8)
+
+#define YT8821_UTP_EXT_ECHO_CTRL_REG 0x336
+#define YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000 GENMASK(14, 8)
+
+#define YT8821_UTP_EXT_GAIN_CTRL_REG 0x340
+#define YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000 GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_RPDN_CTRL_REG 0x34E
+#define YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 BIT(15)
+#define YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 BIT(7)
+#define YT8821_UTP_EXT_RPDN_IPR_SHT_2500 GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG 0x36A
+#define YT8821_UTP_EXT_TH_20DB_2500 GENMASK(15, 0)
+
+#define YT8821_UTP_EXT_TRACE_CTRL_REG 0x372
+#define YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 GENMASK(14, 8)
+#define YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500 GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG 0x374
+#define YT8821_UTP_EXT_ALPHA_SHT_2500 GENMASK(14, 8)
+#define YT8821_UTP_EXT_IPR_LNG_2500 GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_PLL_CTRL_REG 0x450
+#define YT8821_UTP_EXT_PLL_SPARE_CFG GENMASK(7, 0)
+
+#define YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG 0x466
+#define YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG GENMASK(14, 8)
+#define YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG 0x467
+#define YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG GENMASK(14, 8)
+#define YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG 0x468
+#define YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG GENMASK(14, 8)
+#define YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG 0x469
+#define YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG GENMASK(14, 8)
+#define YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG GENMASK(6, 0)
+
+#define YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG 0x4B3
+#define YT8821_UTP_EXT_MU_COARSE_FR_F_FFE GENMASK(14, 12)
+#define YT8821_UTP_EXT_MU_COARSE_FR_F_FBE GENMASK(10, 8)
+
+#define YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG 0x4B5
+#define YT8821_UTP_EXT_MU_FINE_FR_F_FFE GENMASK(14, 12)
+#define YT8821_UTP_EXT_MU_FINE_FR_F_FBE GENMASK(10, 8)
+
+#define YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG 0x4D2
+#define YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER GENMASK(7, 4)
+#define YT8821_UTP_EXT_VGA_LPF1_CAP_2500 GENMASK(3, 0)
+
+#define YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG 0x4D3
+#define YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER GENMASK(7, 4)
+#define YT8821_UTP_EXT_VGA_LPF2_CAP_2500 GENMASK(3, 0)
+
+#define YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG 0x660
+#define YT8821_UTP_EXT_NFR_TX_ABILITY BIT(3)
/* Extended Register end */
#define YTPHY_DTS_OUTPUT_CLK_DIS 0
#define YTPHY_DTS_OUTPUT_CLK_25M 25000000
#define YTPHY_DTS_OUTPUT_CLK_125M 125000000
+#define YT8821_CHIP_MODE_AUTO_BX2500_SGMII 0
+#define YT8821_CHIP_MODE_FORCE_BX2500 1
+
struct yt8521_priv {
/* combo_advertising is used for case of YT8521 in combo mode,
* this means that yt8521 may work in utp or fiber mode which depends
@@ -2249,6 +2328,581 @@ static int yt8521_get_features(struct phy_device *phydev)
return ret;
}
+/**
+ * yt8821_get_features - read mmd register to get 2.5G capability
+ * @phydev: target phy_device struct
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_get_features(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
+ if (val < 0)
+ return val;
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->supported,
+ val & MDIO_PMA_NG_EXTABLE_2_5GBT);
+
+ return genphy_read_abilities(phydev);
+}
+
+/**
+ * yt8821_get_rate_matching - read register to get phy chip mode
+ * @phydev: target phy_device struct
+ * @iface: PHY data interface type
+ *
+ * Returns: rate matching type or negative errno code
+ */
+static int yt8821_get_rate_matching(struct phy_device *phydev,
+ phy_interface_t iface)
+{
+ int val;
+
+ val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
+ if (val < 0)
+ return val;
+
+ if (FIELD_GET(YT8521_CCR_MODE_SEL_MASK, val) ==
+ YT8821_CHIP_MODE_FORCE_BX2500)
+ return RATE_MATCH_PAUSE;
+
+ return RATE_MATCH_NONE;
+}
+
+/**
+ * yt8821_aneg_done() - determines the auto negotiation result
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0(no link)or 1(utp link) or negative errno code
+ */
+static int yt8821_aneg_done(struct phy_device *phydev)
+{
+ int link;
+
+ link = yt8521_aneg_done_paged(phydev, YT8521_RSSR_UTP_SPACE);
+
+ return link;
+}
+
+/**
+ * yt8821_serdes_init() - serdes init
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_serdes_init(struct phy_device *phydev)
+{
+ int old_page;
+ int ret = 0;
+ u16 mask;
+ u16 set;
+
+ old_page = phy_select_page(phydev, YT8521_RSSR_FIBER_SPACE);
+ if (old_page < 0)
+ goto err_restore_page;
+
+ ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_SDS_EXT_CSR_VCO_LDO_EN |
+ YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN;
+ set = YT8821_SDS_EXT_CSR_VCO_LDO_EN;
+ ret = ytphy_modify_ext(phydev, YT8821_SDS_EXT_CSR_CTRL_REG, mask,
+ set);
+ if (ret < 0)
+ goto err_restore_page;
+
+err_restore_page:
+ return phy_restore_page(phydev, old_page, ret);
+}
+
+/**
+ * yt8821_utp_init() - utp init
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_utp_init(struct phy_device *phydev)
+{
+ int old_page;
+ int ret = 0;
+ u16 mask;
+ u16 save;
+ u16 set;
+
+ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
+ if (old_page < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 |
+ YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 |
+ YT8821_UTP_EXT_RPDN_IPR_SHT_2500;
+ set = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 |
+ YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500;
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_RPDN_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER |
+ YT8821_UTP_EXT_VGA_LPF1_CAP_2500;
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG,
+ mask, 0);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER |
+ YT8821_UTP_EXT_VGA_LPF2_CAP_2500;
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG,
+ mask, 0);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 |
+ YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500;
+ set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500, 0x5a) |
+ FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500, 0x3c);
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_TRACE_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_IPR_LNG_2500;
+ set = FIELD_PREP(YT8821_UTP_EXT_IPR_LNG_2500, 0x6c);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000;
+ set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000, 0x2a);
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_ECHO_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000;
+ set = FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000, 0x22);
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_GAIN_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_TH_20DB_2500;
+ set = FIELD_PREP(YT8821_UTP_EXT_TH_20DB_2500, 0x8000);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_MU_COARSE_FR_F_FFE |
+ YT8821_UTP_EXT_MU_COARSE_FR_F_FBE;
+ set = FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FFE, 0x7) |
+ FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FBE, 0x7);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_MU_FINE_FR_F_FFE |
+ YT8821_UTP_EXT_MU_FINE_FR_F_FBE;
+ set = FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FFE, 0x2) |
+ FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FBE, 0x2);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* save YT8821_UTP_EXT_PI_CTRL_REG's val for use later */
+ ret = ytphy_read_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG);
+ if (ret < 0)
+ goto err_restore_page;
+
+ save = ret;
+
+ mask = YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE |
+ YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE |
+ YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE |
+ YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE |
+ YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE;
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG,
+ mask, 0);
+ if (ret < 0)
+ goto err_restore_page;
+
+ /* restore YT8821_UTP_EXT_PI_CTRL_REG's val */
+ ret = ytphy_write_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG, save);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_FECHO_AMP_TH_HUGE;
+ set = FIELD_PREP(YT8821_UTP_EXT_FECHO_AMP_TH_HUGE, 0x38);
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_VCT_CFG6_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_NFR_TX_ABILITY;
+ set = YT8821_UTP_EXT_NFR_TX_ABILITY;
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_PLL_SPARE_CFG;
+ set = FIELD_PREP(YT8821_UTP_EXT_PLL_SPARE_CFG, 0xe9);
+ ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PLL_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG |
+ YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG;
+ set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG, 0x64) |
+ FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG, 0x64);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG |
+ YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG;
+ set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG, 0x64) |
+ FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG, 0x64);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG |
+ YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG;
+ set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG, 0x64) |
+ FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG, 0x64);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+ mask = YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG |
+ YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG;
+ set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG, 0x64) |
+ FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG, 0x64);
+ ret = ytphy_modify_ext(phydev,
+ YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG,
+ mask, set);
+ if (ret < 0)
+ goto err_restore_page;
+
+err_restore_page:
+ return phy_restore_page(phydev, old_page, ret);
+}
+
+/**
+ * yt8821_auto_sleep_config() - phy auto sleep config
+ * @phydev: a pointer to a &struct phy_device
+ * @enable: true enable auto sleep, false disable auto sleep
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_auto_sleep_config(struct phy_device *phydev,
+ bool enable)
+{
+ int old_page;
+ int ret = 0;
+
+ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
+ if (old_page < 0)
+ goto err_restore_page;
+
+ ret = ytphy_modify_ext(phydev,
+ YT8521_EXTREG_SLEEP_CONTROL1_REG,
+ YT8521_ESC1R_SLEEP_SW,
+ enable ? 1 : 0);
+ if (ret < 0)
+ goto err_restore_page;
+
+err_restore_page:
+ return phy_restore_page(phydev, old_page, ret);
+}
+
+/**
+ * yt8821_soft_reset() - soft reset utp and serdes
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_soft_reset(struct phy_device *phydev)
+{
+ return ytphy_modify_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG,
+ YT8521_CCR_SW_RST, 0);
+}
+
+/**
+ * yt8821_config_init() - phy initializatioin
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_config_init(struct phy_device *phydev)
+{
+ u8 mode = YT8821_CHIP_MODE_AUTO_BX2500_SGMII;
+ int ret;
+ u16 set;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
+ mode = YT8821_CHIP_MODE_FORCE_BX2500;
+
+ set = FIELD_PREP(YT8521_CCR_MODE_SEL_MASK, mode);
+ ret = ytphy_modify_ext_with_lock(phydev,
+ YT8521_CHIP_CONFIG_REG,
+ YT8521_CCR_MODE_SEL_MASK,
+ set);
+ if (ret < 0)
+ return ret;
+
+ if (mode == YT8821_CHIP_MODE_AUTO_BX2500_SGMII) {
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ phydev->possible_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ phydev->possible_interfaces);
+
+ phydev->rate_matching = RATE_MATCH_NONE;
+ } else if (mode == YT8821_CHIP_MODE_FORCE_BX2500) {
+ phydev->rate_matching = RATE_MATCH_PAUSE;
+ }
+
+ ret = yt8821_serdes_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = yt8821_utp_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* disable auto sleep */
+ ret = yt8821_auto_sleep_config(phydev, false);
+ if (ret < 0)
+ return ret;
+
+ /* soft reset */
+ return yt8821_soft_reset(phydev);
+}
+
+/**
+ * yt8821_adjust_status() - update speed and duplex to phydev
+ * @phydev: a pointer to a &struct phy_device
+ * @val: read from YTPHY_SPECIFIC_STATUS_REG
+ */
+static void yt8821_adjust_status(struct phy_device *phydev, int val)
+{
+ int speed, duplex;
+ int speed_mode;
+
+ duplex = FIELD_GET(YTPHY_SSR_DUPLEX, val);
+ speed_mode = val & YTPHY_SSR_SPEED_MASK;
+ switch (speed_mode) {
+ case YTPHY_SSR_SPEED_10M:
+ speed = SPEED_10;
+ break;
+ case YTPHY_SSR_SPEED_100M:
+ speed = SPEED_100;
+ break;
+ case YTPHY_SSR_SPEED_1000M:
+ speed = SPEED_1000;
+ break;
+ case YTPHY_SSR_SPEED_2500M:
+ speed = SPEED_2500;
+ break;
+ default:
+ speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ phydev->speed = speed;
+ phydev->duplex = duplex;
+}
+
+/**
+ * yt8821_update_interface() - update interface per current speed
+ * @phydev: a pointer to a &struct phy_device
+ */
+static void yt8821_update_interface(struct phy_device *phydev)
+{
+ if (!phydev->link)
+ return;
+
+ switch (phydev->speed) {
+ case SPEED_2500:
+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+ break;
+ case SPEED_1000:
+ case SPEED_100:
+ case SPEED_10:
+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ phydev_warn(phydev, "phy speed err :%d\n", phydev->speed);
+ break;
+ }
+}
+
+/**
+ * yt8821_read_status() - determines the negotiated speed and duplex
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_read_status(struct phy_device *phydev)
+{
+ int link;
+ int ret;
+ int val;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ int lpadv = phy_read_mmd(phydev,
+ MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+
+ if (lpadv < 0)
+ return lpadv;
+
+ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising,
+ lpadv);
+ }
+
+ ret = ytphy_write_ext_with_lock(phydev,
+ YT8521_REG_SPACE_SELECT_REG,
+ YT8521_RSSR_UTP_SPACE);
+ if (ret < 0)
+ return ret;
+
+ ret = genphy_read_status(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG);
+ if (ret < 0)
+ return ret;
+
+ val = ret;
+
+ link = val & YTPHY_SSR_LINK;
+ if (link)
+ yt8821_adjust_status(phydev, val);
+
+ if (link) {
+ if (phydev->link == 0)
+ phydev_dbg(phydev,
+ "%s, phy addr: %d, link up\n",
+ __func__, phydev->mdio.addr);
+ phydev->link = 1;
+ } else {
+ if (phydev->link == 1)
+ phydev_dbg(phydev,
+ "%s, phy addr: %d, link down\n",
+ __func__, phydev->mdio.addr);
+ phydev->link = 0;
+ }
+
+ val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
+ if (val < 0)
+ return val;
+
+ if (FIELD_GET(YT8521_CCR_MODE_SEL_MASK, val) ==
+ YT8821_CHIP_MODE_AUTO_BX2500_SGMII)
+ yt8821_update_interface(phydev);
+
+ return 0;
+}
+
+/**
+ * yt8821_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register
+ * @phydev: the phy_device struct
+ * @mask: bit mask of bits to clear
+ * @set: bit mask of bits to set
+ *
+ * NOTE: Convenience function which allows a PHY's BMCR register to be
+ * modified as new register value = (old register value & ~mask) | set.
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_modify_utp_fiber_bmcr(struct phy_device *phydev,
+ u16 mask, u16 set)
+{
+ int ret;
+
+ ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE,
+ mask, set);
+ if (ret < 0)
+ return ret;
+
+ return yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE,
+ mask, set);
+}
+
+/**
+ * yt8821_suspend() - suspend the hardware
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_suspend(struct phy_device *phydev)
+{
+ int wol_config;
+
+ wol_config = ytphy_read_ext_with_lock(phydev,
+ YTPHY_WOL_CONFIG_REG);
+ if (wol_config < 0)
+ return wol_config;
+
+ /* if wol enable, do nothing */
+ if (wol_config & YTPHY_WCR_ENABLE)
+ return 0;
+
+ return yt8821_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN);
+}
+
+/**
+ * yt8821_resume() - resume the hardware
+ * @phydev: a pointer to a &struct phy_device
+ *
+ * Returns: 0 or negative errno code
+ */
+static int yt8821_resume(struct phy_device *phydev)
+{
+ int wol_config;
+ int ret;
+
+ /* disable auto sleep */
+ ret = yt8821_auto_sleep_config(phydev, false);
+ if (ret < 0)
+ return ret;
+
+ wol_config = ytphy_read_ext_with_lock(phydev,
+ YTPHY_WOL_CONFIG_REG);
+ if (wol_config < 0)
+ return wol_config;
+
+ /* if wol enable, do nothing */
+ if (wol_config & YTPHY_WCR_ENABLE)
+ return 0;
+
+ return yt8821_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0);
+}
+
static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
@@ -2304,11 +2958,28 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.suspend = yt8521_suspend,
.resume = yt8521_resume,
},
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_YT8821),
+ .name = "YT8821 2.5Gbps PHY",
+ .get_features = yt8821_get_features,
+ .read_page = yt8521_read_page,
+ .write_page = yt8521_write_page,
+ .get_wol = ytphy_get_wol,
+ .set_wol = ytphy_set_wol,
+ .config_aneg = genphy_config_aneg,
+ .aneg_done = yt8821_aneg_done,
+ .config_init = yt8821_config_init,
+ .get_rate_matching = yt8821_get_rate_matching,
+ .read_status = yt8821_read_status,
+ .soft_reset = yt8821_soft_reset,
+ .suspend = yt8821_suspend,
+ .resume = yt8821_resume,
+ },
};
module_phy_driver(motorcomm_phy_drvs);
-MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver");
+MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S/8821 PHY driver");
MODULE_AUTHOR("Peter Geis");
MODULE_AUTHOR("Frank");
MODULE_LICENSE("GPL");
@@ -2318,6 +2989,7 @@ static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_YT8821) },
{ /* sentinel */ }
};
--
2.25.1
Powered by blists - more mailing lists