| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240819005345.84255-7-fujita.tomonori@gmail.com>
Date: Mon, 19 Aug 2024 00:53:45 +0000
From: FUJITA Tomonori <fujita.tomonori@...il.com>
To: netdev@...r.kernel.org
Cc: rust-for-linux@...r.kernel.org,
andrew@...n.ch,
tmgross@...ch.edu,
miguel.ojeda.sandonis@...il.com,
benno.lossin@...ton.me,
aliceryhl@...gle.com
Subject: [PATCH net-next v5 6/6] net: phy: add Applied Micro QT2025 PHY driver
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@...il.com>
---
MAINTAINERS | 7 +++
drivers/net/phy/Kconfig | 7 +++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/qt2025.rs | 90 +++++++++++++++++++++++++++++++++++++++
4 files changed, 105 insertions(+)
create mode 100644 drivers/net/phy/qt2025.rs
diff --git a/MAINTAINERS b/MAINTAINERS
index 9dbfcf77acb2..d4464e59dfea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1609,6 +1609,13 @@ F: Documentation/admin-guide/perf/xgene-pmu.rst
F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
F: drivers/perf/xgene_pmu.c
+APPLIED MICRO QT2025 PHY DRIVER
+M: FUJITA Tomonori <fujita.tomonori@...il.com>
+L: netdev@...r.kernel.org
+L: rust-for-linux@...r.kernel.org
+S: Maintained
+F: drivers/net/phy/qt2025.rs
+
APTINA CAMERA SENSOR PLL
M: Laurent Pinchart <Laurent.pinchart@...asonboard.com>
L: linux-media@...r.kernel.org
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f530fcd092fe..01b235b3bb7e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -112,6 +112,13 @@ config ADIN1100_PHY
Currently supports the:
- ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+config AMCC_QT2025_PHY
+ tristate "AMCC QT2025 PHY"
+ depends on RUST_PHYLIB_ABSTRACTIONS
+ depends on RUST_FW_LOADER_ABSTRACTIONS
+ help
+ Adds support for the Applied Micro Circuits Corporation QT2025 PHY.
+
source "drivers/net/phy/aquantia/Kconfig"
config AX88796B_PHY
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f086a606a87e..669d71959be4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o
obj-$(CONFIG_AMD_PHY) += amd.o
+obj-$(CONFIG_AMCC_QT2025_PHY) += qt2025.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia/
ifdef CONFIG_AX88796B_RUST_PHY
obj-$(CONFIG_AX88796B_PHY) += ax88796b_rust.o
diff --git a/drivers/net/phy/qt2025.rs b/drivers/net/phy/qt2025.rs
new file mode 100644
index 000000000000..45864a7e1120
--- /dev/null
+++ b/drivers/net/phy/qt2025.rs
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) Tehuti Networks Ltd.
+// Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@...il.com>
+
+//! Applied Micro Circuits Corporation QT2025 PHY driver
+use kernel::c_str;
+use kernel::error::code;
+use kernel::firmware::Firmware;
+use kernel::net::phy::{
+ self,
+ reg::{Mmd, C45},
+ DeviceId, Driver,
+};
+use kernel::prelude::*;
+use kernel::sizes::{SZ_16K, SZ_32K, SZ_8K};
+
+kernel::module_phy_driver! {
+ drivers: [PhyQT2025],
+ device_table: [
+ DeviceId::new_with_driver::<PhyQT2025>(),
+ ],
+ name: "qt2025_phy",
+ author: "FUJITA Tomonori <fujita.tomonori@...il.com>",
+ description: "AMCC QT2025 PHY driver",
+ license: "GPL",
+ firmware: ["qt2025-2.0.3.3.fw"],
+}
+
+struct PhyQT2025;
+
+#[vtable]
+impl Driver for PhyQT2025 {
+ const NAME: &'static CStr = c_str!("QT2025 10Gpbs SFP+");
+ const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x0043A400);
+
+ fn probe(dev: &mut phy::Device) -> Result<()> {
+ // The vendor driver does the following checking but we have no idea why.
+ let hw_id = dev.read(C45::new(Mmd::PMAPMD, 0xd001))?;
+ if (hw_id >> 8) & 0xff != 0xb3 {
+ return Err(code::ENODEV);
+ }
+
+ // The 8051 will remain in the reset state.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC300), 0x0000)?;
+ // Configure the 8051 clock frequency.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC302), 0x0004)?;
+ // Non loopback mode.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC319), 0x0038)?;
+ // Global control bit to select between LAN and WAN (WIS) mode.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC31A), 0x0098)?;
+ dev.write(C45::new(Mmd::PCS, 0x0026), 0x0E00)?;
+ dev.write(C45::new(Mmd::PCS, 0x0027), 0x0893)?;
+ dev.write(C45::new(Mmd::PCS, 0x0028), 0xA528)?;
+ dev.write(C45::new(Mmd::PCS, 0x0029), 0x0003)?;
+ // Configure transmit and recovered clock.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC30A), 0x06E1)?;
+ // The 8051 will finish the reset state.
+ dev.write(C45::new(Mmd::PMAPMD, 0xC300), 0x0002)?;
+ // The 8051 will start running from the boot ROM.
+ dev.write(C45::new(Mmd::PCS, 0xE854), 0x00C0)?;
+
+ let fw = Firmware::request(c_str!("qt2025-2.0.3.3.fw"), dev.as_ref())?;
+ if fw.data().len() > SZ_16K + SZ_8K {
+ return Err(code::EFBIG);
+ }
+
+ // The 24kB of program memory space is accessible by MDIO.
+ // The first 16kB of memory is located in the address range 3.8000h - 3.BFFFh.
+ // The next 8kB of memory is located at 4.8000h - 4.9FFFh.
+ let mut j = SZ_32K;
+ for (i, val) in fw.data().iter().enumerate() {
+ if i == SZ_16K {
+ j = SZ_32K;
+ }
+
+ let mmd = if i < SZ_16K { Mmd::PCS } else { Mmd::PHYXS };
+ dev.write(C45::new(mmd, j as u16), (*val).into())?;
+
+ j += 1;
+ }
+ // The 8051 will start running from SRAM.
+ dev.write(C45::new(Mmd::PCS, 0xE854), 0x0040)?;
+
+ Ok(())
+ }
+
+ fn read_status(dev: &mut phy::Device) -> Result<u16> {
+ dev.genphy_read_status::<C45>()
+ }
+}
--
2.34.1
Powered by blists - more mailing lists