| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240820-baritone-delegate-5711f7a0bc76@spud>
Date: Tue, 20 Aug 2024 17:19:02 +0100
From: Conor Dooley <conor@...nel.org>
To: Andrea della Porta <andrea.porta@...e.com>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Linus Walleij <linus.walleij@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Derek Kiernan <derek.kiernan@....com>,
Dragan Cvetic <dragan.cvetic@....com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Saravana Kannan <saravanak@...gle.com>,
Bjorn Helgaas <bhelgaas@...gle.com>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, netdev@...r.kernel.org,
linux-pci@...r.kernel.org, linux-arch@...r.kernel.org,
Lee Jones <lee@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Stefan Wahren <wahrenst@....net>
Subject: Re: [PATCH 01/11] dt-bindings: clock: Add RaspberryPi RP1 clock
bindings
On Tue, Aug 20, 2024 at 04:36:03PM +0200, Andrea della Porta wrote:
> Add device tree bindings for the clock generator found in RP1 multi
> function device, and relative entries in MAINTAINERS file.
>
> Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
> ---
> .../clock/raspberrypi,rp1-clocks.yaml | 87 +++++++++++++++++++
> MAINTAINERS | 6 ++
> include/dt-bindings/clock/rp1.h | 56 ++++++++++++
> 3 files changed, 149 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> create mode 100644 include/dt-bindings/clock/rp1.h
>
> diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> new file mode 100644
> index 000000000000..b27db86d0572
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RaspberryPi RP1 clock generator
> +
> +maintainers:
> + - Andrea della Porta <andrea.porta@...e.com>
> +
> +description: |
> + The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO,
> + VIDEO), and each PLL output can be programmed though dividers to generate
> + the clocks to drive the sub-peripherals embedded inside the chipset.
> +
> + Link to datasheet:
> + https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
> +
> +properties:
> + compatible:
> + const: raspberrypi,rp1-clocks
> +
> + reg:
> + maxItems: 1
> +
> + '#clock-cells':
> + description:
> + The index in the assigned-clocks is mapped to the output clock as per
> + definitions in dt-bindings/clock/rp1.h.
> + const: 1
> +
> + clocks:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - '#clock-cells'
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rp1.h>
> +
> + rp1 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rp1_clocks: clocks@...00 {
The unit address does not match the reg property. I'm surprised that
dtc doesn't complain about that.
> + compatible = "raspberrypi,rp1-clocks";
> + reg = <0xc0 0x40018000 0x0 0x10038>;
This is a rather oddly specific size. It leads me to wonder if this
region is inside some sort of syscon area?
> + #clock-cells = <1>;
> + clocks = <&clk_xosc>;
> +
> + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
FWIW, I don't think any of these assigned clocks are helpful for the
example. That said, why do you need to configure all of these assigned
clocks via devicetree when this node is the provider of them?
> + <&rp1_clocks RP1_PLL_AUDIO_CORE>,
> + /* RP1_PLL_VIDEO_CORE and dividers are now managed by VEC,DPI drivers */
Comments like this also do not seem relevant to the binding.
Cheers,
Conor.
> + <&rp1_clocks RP1_PLL_SYS>,
> + <&rp1_clocks RP1_PLL_SYS_SEC>,
> + <&rp1_clocks RP1_PLL_AUDIO>,
> + <&rp1_clocks RP1_PLL_AUDIO_SEC>,
> + <&rp1_clocks RP1_CLK_SYS>,
> + <&rp1_clocks RP1_PLL_SYS_PRI_PH>,
> + /* RP1_CLK_SLOW_SYS is used for the frequency counter (FC0) */
> + <&rp1_clocks RP1_CLK_SLOW_SYS>,
> + <&rp1_clocks RP1_CLK_SDIO_TIMER>,
> + <&rp1_clocks RP1_CLK_SDIO_ALT_SRC>,
> + <&rp1_clocks RP1_CLK_ETH_TSU>;
> +
> + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
> + <1536000000>, // RP1_PLL_AUDIO_CORE
> + <200000000>, // RP1_PLL_SYS
> + <125000000>, // RP1_PLL_SYS_SEC
> + <61440000>, // RP1_PLL_AUDIO
> + <192000000>, // RP1_PLL_AUDIO_SEC
> + <200000000>, // RP1_CLK_SYS
> + <100000000>, // RP1_PLL_SYS_PRI_PH
> + /* Must match the XOSC frequency */
> + <50000000>, // RP1_CLK_SLOW_SYS
> + <1000000>, // RP1_CLK_SDIO_TIMER
> + <200000000>, // RP1_CLK_SDIO_ALT_SRC
> + <50000000>; // RP1_CLK_ETH_TSU
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 42decde38320..6e7db9bce278 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19116,6 +19116,12 @@ F: Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
> F: drivers/media/platform/raspberrypi/pisp_be/
> F: include/uapi/linux/media/raspberrypi/
>
> +RASPBERRY PI RP1 PCI DRIVER
> +M: Andrea della Porta <andrea.porta@...e.com>
> +S: Maintained
> +F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> +F: include/dt-bindings/clock/rp1.h
> +
> RC-CORE / LIRC FRAMEWORK
> M: Sean Young <sean@...s.org>
> L: linux-media@...r.kernel.org
> diff --git a/include/dt-bindings/clock/rp1.h b/include/dt-bindings/clock/rp1.h
> new file mode 100644
> index 000000000000..1ed67b8a5229
> --- /dev/null
> +++ b/include/dt-bindings/clock/rp1.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0 OR MIT */
> +/*
> + * Copyright (C) 2021 Raspberry Pi Ltd.
> + */
> +
> +#define RP1_PLL_SYS_CORE 0
> +#define RP1_PLL_AUDIO_CORE 1
> +#define RP1_PLL_VIDEO_CORE 2
> +
> +#define RP1_PLL_SYS 3
> +#define RP1_PLL_AUDIO 4
> +#define RP1_PLL_VIDEO 5
> +
> +#define RP1_PLL_SYS_PRI_PH 6
> +#define RP1_PLL_SYS_SEC_PH 7
> +#define RP1_PLL_AUDIO_PRI_PH 8
> +
> +#define RP1_PLL_SYS_SEC 9
> +#define RP1_PLL_AUDIO_SEC 10
> +#define RP1_PLL_VIDEO_SEC 11
> +
> +#define RP1_CLK_SYS 12
> +#define RP1_CLK_SLOW_SYS 13
> +#define RP1_CLK_DMA 14
> +#define RP1_CLK_UART 15
> +#define RP1_CLK_ETH 16
> +#define RP1_CLK_PWM0 17
> +#define RP1_CLK_PWM1 18
> +#define RP1_CLK_AUDIO_IN 19
> +#define RP1_CLK_AUDIO_OUT 20
> +#define RP1_CLK_I2S 21
> +#define RP1_CLK_MIPI0_CFG 22
> +#define RP1_CLK_MIPI1_CFG 23
> +#define RP1_CLK_PCIE_AUX 24
> +#define RP1_CLK_USBH0_MICROFRAME 25
> +#define RP1_CLK_USBH1_MICROFRAME 26
> +#define RP1_CLK_USBH0_SUSPEND 27
> +#define RP1_CLK_USBH1_SUSPEND 28
> +#define RP1_CLK_ETH_TSU 29
> +#define RP1_CLK_ADC 30
> +#define RP1_CLK_SDIO_TIMER 31
> +#define RP1_CLK_SDIO_ALT_SRC 32
> +#define RP1_CLK_GP0 33
> +#define RP1_CLK_GP1 34
> +#define RP1_CLK_GP2 35
> +#define RP1_CLK_GP3 36
> +#define RP1_CLK_GP4 37
> +#define RP1_CLK_GP5 38
> +#define RP1_CLK_VEC 39
> +#define RP1_CLK_DPI 40
> +#define RP1_CLK_MIPI0_DPI 41
> +#define RP1_CLK_MIPI1_DPI 42
> +
> +/* Extra PLL output channels - RP1B0 only */
> +#define RP1_PLL_VIDEO_PRI_PH 43
> +#define RP1_PLL_AUDIO_TERN 44
> --
> 2.35.3
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists