netdev - Re: [PATCH 07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <l4xijmtxz5i5kkkd5tt25ls33drnnhxp26r42lab5ev343e4zh@ctknkjzbpwqz>
Date: Wed, 21 Aug 2024 10:45:03 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Andrea della Porta <andrea.porta@...e.com>
Cc: Michael Turquette <mturquette@...libre.com>, 
	Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Florian Fainelli <florian.fainelli@...adcom.com>, 
	Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>, Linus Walleij <linus.walleij@...aro.org>, 
	Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>, 
	Derek Kiernan <derek.kiernan@....com>, Dragan Cvetic <dragan.cvetic@....com>, 
	Arnd Bergmann <arnd@...db.de>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
	Nicolas Ferre <nicolas.ferre@...rochip.com>, Claudiu Beznea <claudiu.beznea@...on.dev>, 
	"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Saravana Kannan <saravanak@...gle.com>, Bjorn Helgaas <bhelgaas@...gle.com>, linux-clk@...r.kernel.org, 
	devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org, 
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org, 
	netdev@...r.kernel.org, linux-pci@...r.kernel.org, linux-arch@...r.kernel.org, 
	Lee Jones <lee@...nel.org>, Andrew Lunn <andrew@...n.ch>, Stefan Wahren <wahrenst@....net>
Subject: Re: [PATCH 07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio
 support

On Tue, Aug 20, 2024 at 04:36:09PM +0200, Andrea della Porta wrote:
> The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl.
> Add minimum support for the gpio only portion. The driver is in
> pinctrl folder since upcoming patches will add the pinmux/pinctrl
> support where the gpio part can be seen as an addition.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
> ---
>  MAINTAINERS                   |   1 +
>  drivers/pinctrl/Kconfig       |  10 +
>  drivers/pinctrl/Makefile      |   1 +
>  drivers/pinctrl/pinctrl-rp1.c | 719 ++++++++++++++++++++++++++++++++++
>  4 files changed, 731 insertions(+)
>  create mode 100644 drivers/pinctrl/pinctrl-rp1.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4ce7b049d67e..67f460c36ea1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19122,6 +19122,7 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
>  F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
>  F:	drivers/clk/clk-rp1.c
> +F:	drivers/pinctrl/pinctrl-rp1.c
>  F:	include/dt-bindings/clock/rp1.h
>  F:	include/dt-bindings/misc/rp1.h
>  
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 7e4f93a3bc7a..18bb1a8bd102 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -565,6 +565,16 @@ config PINCTRL_MLXBF3
>  	  each pin. This driver can also be built as a module called
>  	  pinctrl-mlxbf3.
>  
> +config PINCTRL_RP1
> +	bool "Pinctrl driver for RP1"
> +	select PINMUX
> +	select PINCONF
> +	select GENERIC_PINCONF
> +	select GPIOLIB_IRQCHIP
> +	help
> +	  Enable the gpio and pinctrl/mux  driver for RaspberryPi RP1
> +	  multi function device. 
> +
>  source "drivers/pinctrl/actions/Kconfig"
>  source "drivers/pinctrl/aspeed/Kconfig"
>  source "drivers/pinctrl/bcm/Kconfig"
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index cc809669405a..f1ca23b563f6 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl-pic32.o
>  obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
>  obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
>  obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
> +obj-$(CONFIG_PINCTRL_RP1)       += pinctrl-rp1.o
>  obj-$(CONFIG_PINCTRL_SCMI)	+= pinctrl-scmi.o
>  obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
>  obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
> diff --git a/drivers/pinctrl/pinctrl-rp1.c b/drivers/pinctrl/pinctrl-rp1.c
> new file mode 100644
> index 000000000000..c035d2014505
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-rp1.c
> @@ -0,0 +1,719 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Raspberry Pi RP1 GPIO unit
> + *
> + * Copyright (C) 2023 Raspberry Pi Ltd.
> + *
> + * This driver is inspired by:
> + * pinctrl-bcm2835.c, please see original file for copyright information
> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/bug.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/init.h>
> +#include <linux/of_address.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>

Half of these headers are not used. Drop them.

Best regards,
Krzysztof