lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3bee2863-8d6c-4b62-aadf-a051b6f9905a@ti.com>
Date: Thu, 22 Aug 2024 17:44:14 +0530
From: "Anwar, Md Danish" <a0501179@...com>
To: Roger Quadros <rogerq@...nel.org>, MD Danish Anwar <danishanwar@...com>,
        Dan Carpenter <dan.carpenter@...aro.org>, Andrew Lunn <andrew@...n.ch>,
        Jan
 Kiszka <jan.kiszka@...mens.com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Javier Carrasco <javier.carrasco.cruz@...il.com>,
        Jacob Keller
	<jacob.e.keller@...el.com>,
        Diogo Ivo <diogo.ivo@...mens.com>, Simon Horman
	<horms@...nel.org>,
        Richard Cochran <richardcochran@...il.com>,
        Paolo Abeni
	<pabeni@...hat.com>, Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet
	<edumazet@...gle.com>,
        "David S. Miller" <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <srk@...com>
Subject: Re: [PATCH net-next v2 7/7] net: ti: icssg-prueth: Enable HSR Tx Tag
 and Rx Tag offload



On 8/22/2024 4:58 PM, Roger Quadros wrote:
> 
> 
> On 22/08/2024 11:03, MD Danish Anwar wrote:
>>
>>
>> On 21/08/24 5:45 pm, Roger Quadros wrote:
>>>
>>>
>>> On 13/08/2024 10:42, MD Danish Anwar wrote:
>>>> From: Ravi Gunasekaran <r-gunasekaran@...com>
>>>>
>>>> Add support to offload HSR Tx Tag Insertion and Rx Tag Removal
>>>> and duplicate discard.
>>>
>>> I can see code for Tx Tag insertion and RX tag removal.
>>> Where are you doing duplicate discard in this patch?
>>>
>>
>> Roger, duplicate discard is done as part of RX tag removal and it is
>> done by firmware.
>> When driver sends the command ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware
>> does RX tag removal as well as duplicate discard.
>>
>> Maybe I can modify the commit message to stated that duplicate discard
>> is done as part of rx tag removal?
> 
> Yes please, that will help. Thanks!
> 

Sure Roger, will do.

>>
>>>>
>>>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
>>>> ---
>>>>  drivers/net/ethernet/ti/icssg/icssg_common.c |  3 +++
>>>>  drivers/net/ethernet/ti/icssg/icssg_config.c |  4 +++-
>>>>  drivers/net/ethernet/ti/icssg/icssg_config.h |  2 ++
>>>>  drivers/net/ethernet/ti/icssg/icssg_prueth.c | 11 ++++++++++-
>>>>  drivers/net/ethernet/ti/icssg/icssg_prueth.h |  1 +
>>>>  5 files changed, 19 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> index 2d6d8648f5a9..4eae4f9250c0 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> @@ -721,6 +721,9 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>>  	if (prueth->is_hsr_offload_mode && (ndev->features & NETIF_F_HW_HSR_DUP))
>>>>  		dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;
>>>>  
>>>> +	if (prueth->is_hsr_offload_mode && (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>>> +		epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;
>>>> +
>>>>  	cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
>>>>  	k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
>>>>  	cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> index 2f485318c940..f061fa97a377 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
>>>>  	{{EMAC_NONE,  0xffff4000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx ENABLE*/
>>>>  	{{EMAC_NONE,  0xbfff0000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx DISABLE*/
>>>>  	{{0xffff0010,  EMAC_NONE, 0xffff0010, EMAC_NONE}},	/* VLAN AWARE*/
>>>> -	{{0xffef0000,  EMAC_NONE, 0xffef0000, EMAC_NONE}}	/* VLAN UNWARE*/
>>>> +	{{0xffef0000,  EMAC_NONE, 0xffef0000, EMAC_NONE}},	/* VLAN UNWARE*/
>>>> +	{{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}},	/* HSR_RX_OFFLOAD_ENABLE */
>>>> +	{{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}		/* HSR_RX_OFFLOAD_DISABLE */
>>>>  };
>>>>  
>>>>  int icssg_set_port_state(struct prueth_emac *emac,
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> index 1ac60283923b..92c2deaa3068 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
>>>>  	ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>>>>  	ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>>>>  	ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>>>> +	ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
>>>> +	ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
>>>>  	ICSSG_EMAC_PORT_MAX_COMMANDS
>>>>  };
>>>>  
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> index 521e9f914459..582e72dd8f3f 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> @@ -42,7 +42,9 @@
>>>>  #define DEFAULT_UNTAG_MASK	1
>>>>  
>>>>  #define NETIF_PRUETH_HSR_OFFLOAD	(NETIF_F_HW_HSR_FWD | \
>>>> -					 NETIF_F_HW_HSR_DUP)
>>>> +					 NETIF_F_HW_HSR_DUP | \
>>>> +					 NETIF_F_HW_HSR_TAG_INS | \
>>>> +					 NETIF_F_HW_HSR_TAG_RM)
>>>>  
>>>>  /* CTRLMMR_ICSSG_RGMII_CTRL register bits */
>>>>  #define ICSSG_CTRL_RGMII_ID_MODE                BIT(24)
>>>> @@ -1032,6 +1034,13 @@ static void icssg_change_mode(struct prueth *prueth)
>>>>  
>>>>  	for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
>>>>  		emac = prueth->emac[mac];
>>>> +		if (prueth->is_hsr_offload_mode) {
>>>> +			if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
>>>> +				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
>>
>> Duplicate discard is done here ^^^^
> 
> Got it.
> 
>>
>>>> +			else
>>>> +				icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
>>>> +		}
>>>> +
>>>>  		if (netif_running(emac->ndev)) {
>>>>  			icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
>>>>  					  ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> index 6cb1dce8b309..246f1e41c13a 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> @@ -58,6 +58,7 @@
>>>>  #define IEP_DEFAULT_CYCLE_TIME_NS	1000000	/* 1 ms */
>>>>  
>>>>  #define PRUETH_UNDIRECTED_PKT_DST_TAG	0
>>>> +#define PRUETH_UNDIRECTED_PKT_TAG_INS	BIT(30)
>>>>  
>>>>  /* Firmware status codes */
>>>>  #define ICSS_HS_FW_READY 0x55555555
>>>
>>
> 

-- 
Thanks and Regards,
Md Danish Anwar

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ