netdev - [PATCH v2] net: ftgmac100: Get link speed and duplex for NC-SI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240822031945.3102130-1-jacky_chou@aspeedtech.com>
Date: Thu, 22 Aug 2024 11:19:45 +0800
From: Jacky Chou <jacky_chou@...eedtech.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <jacky_chou@...eedtech.com>,
	<u.kleine-koenig@...gutronix.de>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: [PATCH v2] net: ftgmac100: Get link speed and duplex for NC-SI

The ethtool of this driver uses the phy API of ethtool
to get the link information from PHY driver.
Because the NC-SI is forced on 100Mbps and full duplex,
the driver connects a fixed-link phy driver for NC-SI.
The ethtool will get the link information from the
fixed-link phy driver.

Signed-off-by: Jacky Chou <jacky_chou@...eedtech.com>
---
v2:
  - use static for struct fixed_phy_status ncsi_phy_status
  - Stop phy device at net_device stop when using NC-SI.
  - Start phy device at net_device start when using NC-SI.
---
 drivers/net/ethernet/faraday/ftgmac100.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index fddfd1dd5070..93862b027be0 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -26,6 +26,7 @@
 #include <linux/of_net.h>
 #include <net/ip.h>
 #include <net/ncsi.h>
+#include <linux/phy_fixed.h>
 
 #include "ftgmac100.h"
 
@@ -50,6 +51,15 @@
 #define FTGMAC_100MHZ		100000000
 #define FTGMAC_25MHZ		25000000
 
+/* For NC-SI to register a fixed-link phy device */
+static struct fixed_phy_status ncsi_phy_status = {
+	.link = 1,
+	.speed = SPEED_100,
+	.duplex = DUPLEX_FULL,
+	.pause = 0,
+	.asym_pause = 0
+};
+
 struct ftgmac100 {
 	/* Registers */
 	struct resource *res;
@@ -1531,7 +1541,8 @@ static int ftgmac100_open(struct net_device *netdev)
 	if (netdev->phydev) {
 		/* If we have a PHY, start polling */
 		phy_start(netdev->phydev);
-	} else if (priv->use_ncsi) {
+	}
+	if (priv->use_ncsi) {
 		/* If using NC-SI, set our carrier on and start the stack */
 		netif_carrier_on(netdev);
 
@@ -1577,7 +1588,7 @@ static int ftgmac100_stop(struct net_device *netdev)
 	netif_napi_del(&priv->napi);
 	if (netdev->phydev)
 		phy_stop(netdev->phydev);
-	else if (priv->use_ncsi)
+	if (priv->use_ncsi)
 		ncsi_stop_dev(priv->ndev);
 
 	ftgmac100_stop_hw(priv);
@@ -1794,6 +1805,7 @@ static int ftgmac100_probe(struct platform_device *pdev)
 	struct net_device *netdev;
 	struct ftgmac100 *priv;
 	struct device_node *np;
+	struct phy_device *phydev;
 	int err = 0;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1879,6 +1891,14 @@ static int ftgmac100_probe(struct platform_device *pdev)
 			err = -EINVAL;
 			goto err_phy_connect;
 		}
+
+		phydev = fixed_phy_register(PHY_POLL, &ncsi_phy_status, NULL);
+		err = phy_connect_direct(netdev, phydev, ftgmac100_adjust_link,
+					 PHY_INTERFACE_MODE_MII);
+		if (err) {
+			dev_err(&pdev->dev, "Connecting PHY failed\n");
+			goto err_phy_connect;
+		}
 	} else if (np && of_phy_is_fixed_link(np)) {
 		struct phy_device *phy;
 
-- 
2.25.1