[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cfb025a4-41a4-448f-a7a8-7ce14f8532f5@ti.com>
Date: Thu, 22 Aug 2024 13:33:34 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Roger Quadros <rogerq@...nel.org>,
Dan Carpenter
<dan.carpenter@...aro.org>,
Andrew Lunn <andrew@...n.ch>, Jan Kiszka
<jan.kiszka@...mens.com>,
Vignesh Raghavendra <vigneshr@...com>,
Javier
Carrasco <javier.carrasco.cruz@...il.com>,
Jacob Keller
<jacob.e.keller@...el.com>,
Diogo Ivo <diogo.ivo@...mens.com>, Simon Horman
<horms@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Paolo Abeni
<pabeni@...hat.com>, Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet
<edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>
Subject: Re: [PATCH net-next v2 7/7] net: ti: icssg-prueth: Enable HSR Tx Tag
and Rx Tag offload
On 21/08/24 5:45 pm, Roger Quadros wrote:
>
>
> On 13/08/2024 10:42, MD Danish Anwar wrote:
>> From: Ravi Gunasekaran <r-gunasekaran@...com>
>>
>> Add support to offload HSR Tx Tag Insertion and Rx Tag Removal
>> and duplicate discard.
>
> I can see code for Tx Tag insertion and RX tag removal.
> Where are you doing duplicate discard in this patch?
>
Roger, duplicate discard is done as part of RX tag removal and it is
done by firmware.
When driver sends the command ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware
does RX tag removal as well as duplicate discard.
Maybe I can modify the commit message to stated that duplicate discard
is done as part of rx tag removal?
>>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
>> ---
>> drivers/net/ethernet/ti/icssg/icssg_common.c | 3 +++
>> drivers/net/ethernet/ti/icssg/icssg_config.c | 4 +++-
>> drivers/net/ethernet/ti/icssg/icssg_config.h | 2 ++
>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 11 ++++++++++-
>> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 1 +
>> 5 files changed, 19 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
>> index 2d6d8648f5a9..4eae4f9250c0 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_common.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
>> @@ -721,6 +721,9 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>> if (prueth->is_hsr_offload_mode && (ndev->features & NETIF_F_HW_HSR_DUP))
>> dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;
>>
>> + if (prueth->is_hsr_offload_mode && (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>> + epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;
>> +
>> cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
>> k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
>> cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
>> index 2f485318c940..f061fa97a377 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
>> @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
>> {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>> {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>> {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>> - {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}}, /* VLAN UNWARE*/
>> + {{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* HSR_RX_OFFLOAD_ENABLE */
>> + {{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}} /* HSR_RX_OFFLOAD_DISABLE */
>> };
>>
>> int icssg_set_port_state(struct prueth_emac *emac,
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
>> index 1ac60283923b..92c2deaa3068 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
>> @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
>> ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>> ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>> ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>> + ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
>> + ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
>> ICSSG_EMAC_PORT_MAX_COMMANDS
>> };
>>
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> index 521e9f914459..582e72dd8f3f 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> @@ -42,7 +42,9 @@
>> #define DEFAULT_UNTAG_MASK 1
>>
>> #define NETIF_PRUETH_HSR_OFFLOAD (NETIF_F_HW_HSR_FWD | \
>> - NETIF_F_HW_HSR_DUP)
>> + NETIF_F_HW_HSR_DUP | \
>> + NETIF_F_HW_HSR_TAG_INS | \
>> + NETIF_F_HW_HSR_TAG_RM)
>>
>> /* CTRLMMR_ICSSG_RGMII_CTRL register bits */
>> #define ICSSG_CTRL_RGMII_ID_MODE BIT(24)
>> @@ -1032,6 +1034,13 @@ static void icssg_change_mode(struct prueth *prueth)
>>
>> for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
>> emac = prueth->emac[mac];
>> + if (prueth->is_hsr_offload_mode) {
>> + if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
Duplicate discard is done here ^^^^
>> + else
>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
>> + }
>> +
>> if (netif_running(emac->ndev)) {
>> icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
>> ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> index 6cb1dce8b309..246f1e41c13a 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>> @@ -58,6 +58,7 @@
>> #define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
>>
>> #define PRUETH_UNDIRECTED_PKT_DST_TAG 0
>> +#define PRUETH_UNDIRECTED_PKT_TAG_INS BIT(30)
>>
>> /* Firmware status codes */
>> #define ICSS_HS_FW_READY 0x55555555
>
--
Thanks and Regards,
Danish
Powered by blists - more mailing lists