netdev - [PATCH AUTOSEL 6.6 13/20] net: phy: vitesse: repair vsc73xx autonegotiation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20240823140309.1974696-13-sashal@kernel.org>
Date: Fri, 23 Aug 2024 10:02:27 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Pawel Dembicki <paweldembicki@...il.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	"David S . Miller" <davem@...emloft.net>,
	Sasha Levin <sashal@...nel.org>,
	andrew@...n.ch,
	hkallweit1@...il.com,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 6.6 13/20] net: phy: vitesse: repair vsc73xx autonegotiation

From: Pawel Dembicki <paweldembicki@...il.com>

[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]

When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.

Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/phy/vitesse.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 897b979ec03c8..3b5fcaf0dd36d 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -237,16 +237,6 @@ static int vsc739x_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int vsc73xx_config_aneg(struct phy_device *phydev)
-{
-	/* The VSC73xx switches does not like to be instructed to
-	 * do autonegotiation in any way, it prefers that you just go
-	 * with the power-on/reset defaults. Writing some registers will
-	 * just make autonegotiation permanently fail.
-	 */
-	return 0;
-}
-
 /* This adds a skew for both TX and RX clocks, so the skew should only be
  * applied to "rgmii-id" interfaces. It may not work as expected
  * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
@@ -444,7 +434,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -453,7 +442,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -462,7 +450,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -471,7 +458,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
-- 
2.43.0