[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <qx4k2xehasda7zj6vt3bygdh3scehiiwniqvljj4b4rjde25a5@ys4oqsithhwi>
Date: Fri, 23 Aug 2024 12:11:23 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Yangtao Li <frank.li@...o.com>
Cc: clement.leger@...tlin.com, andrew@...n.ch, f.fainelli@...il.com,
olteanv@...il.com, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, ulli.kroll@...glemail.com, linus.walleij@...aro.org,
marcin.s.wojtas@...il.com, linux@...linux.org.uk, alexandre.torgue@...s.st.com,
joabreu@...opsys.com, mcoquelin.stm32@...il.com, hkallweit1@...il.com, kees@...nel.org,
justinstitt@...gle.com, u.kleine-koenig@...gutronix.de, horms@...nel.org,
sd@...asysnail.net, linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com, Maxime Chevallier <maxime.chevallier@...tlin.com>
Subject: Re: [net-next v2 2/9] net: stmmac: platform: Convert to
devm_clk_get_enabled() and devm_clk_get_optional_enabled()
Hi Yangtao
On Fri, Aug 23, 2024 at 01:21:14AM -0600, Yangtao Li wrote:
> Use devm_clk_get_enabled() and devm_clk_get_optional_enabled()
> to simplify code.
>
> Signed-off-by: Yangtao Li <frank.li@...o.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
> ---
> v2:
> -remove unused 'ret'
> -fix incompatible-pointer-types
>
> .../ethernet/stmicro/stmmac/stmmac_platform.c | 35 +++++--------------
> 1 file changed, 8 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index ad868e8d195d..1a66baaa4081 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct device_node *np)
> static void stmmac_remove_config_dt(struct platform_device *pdev,
> struct plat_stmmacenet_data *plat)
> {
> - clk_disable_unprepare(plat->stmmac_clk);
> - clk_disable_unprepare(plat->pclk);
> of_node_put(plat->phy_node);
> of_node_put(plat->mdio_node);
> }
> @@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> struct plat_stmmacenet_data *plat;
> struct stmmac_dma_cfg *dma_cfg;
> int phy_mode;
> - void *ret;
> int rc;
>
> plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
> @@ -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>
> /* clock setup */
> if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
> - plat->stmmac_clk = devm_clk_get(&pdev->dev,
> - STMMAC_RESOURCE_NAME);
> + plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev, STMMAC_RESOURCE_NAME);
> if (IS_ERR(plat->stmmac_clk)) {
> dev_warn(&pdev->dev, "Cannot get CSR clock\n");
> plat->stmmac_clk = NULL;
> }
> - clk_prepare_enable(plat->stmmac_clk);
> }
>
> - plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> - if (IS_ERR(plat->pclk)) {
> - ret = plat->pclk;
> - goto error_pclk_get;
> - }
> - clk_prepare_enable(plat->pclk);
> + plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> + if (IS_ERR(plat->pclk))
> + return (void *)plat->pclk;
Use the ERR_CAST() macro instead of the open coded void type cast.
>
> /* Fall-back to main clock in case of no PTP ref is passed */
> plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
> @@ -644,26 +636,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>
> plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
> STMMAC_RESOURCE_NAME);
> - if (IS_ERR(plat->stmmac_rst)) {
> - ret = plat->stmmac_rst;
> - goto error_hw_init;
> - }
> + if (IS_ERR(plat->stmmac_rst))
> + return (void *)plat->stmmac_rst;
ditto
>
> plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
> &pdev->dev, "ahb");
> - if (IS_ERR(plat->stmmac_ahb_rst)) {
> - ret = plat->stmmac_ahb_rst;
> - goto error_hw_init;
> - }
> + if (IS_ERR(plat->stmmac_ahb_rst))
> + return (void *)plat->stmmac_ahb_rst;
ditto
-Serge(y)
>
> return plat;
> -
> -error_hw_init:
> - clk_disable_unprepare(plat->pclk);
> -error_pclk_get:
> - clk_disable_unprepare(plat->stmmac_clk);
> -
> - return ret;
> }
>
> static void devm_stmmac_remove_config_dt(void *data)
> --
> 2.39.0
>
>
Powered by blists - more mailing lists