lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240828134814.0000569d@Huawei.com>
Date: Wed, 28 Aug 2024 13:48:14 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Jinjie Ruan <ruanjinjie@...wei.com>
CC: <woojung.huh@...rochip.com>, <andrew@...n.ch>, <f.fainelli@...il.com>,
	<olteanv@...il.com>, <davem@...emloft.net>, <edumazet@...gle.com>,
	<kuba@...nel.org>, <pabeni@...hat.com>, <linus.walleij@...aro.org>,
	<alsi@...g-olufsen.dk>, <justin.chen@...adcom.com>,
	<sebastian.hesselbarth@...il.com>, <alexandre.torgue@...s.st.com>,
	<joabreu@...opsys.com>, <mcoquelin.stm32@...il.com>, <wens@...e.org>,
	<jernej.skrabec@...il.com>, <samuel@...lland.org>, <hkallweit1@...il.com>,
	<linux@...linux.org.uk>, <ansuelsmth@...il.com>,
	<UNGLinuxDriver@...rochip.com>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <bcm-kernel-feedback-list@...adcom.com>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-sunxi@...ts.linux.dev>,
	<linux-stm32@...md-mailman.stormreply.com>, <krzk@...nel.org>,
	<jic23@...nel.org>
Subject: Re: [PATCH net-next v2 08/13] net: mdio: mux-mmioreg: Simplified
 with dev_err_probe()

On Wed, 28 Aug 2024 11:23:38 +0800
Jinjie Ruan <ruanjinjie@...wei.com> wrote:

> Use the dev_err_probe() helper to simplify code.
> 
> Signed-off-by: Jinjie Ruan <ruanjinjie@...wei.com>
Ah. I should have read next patch. Sorry!

Might be worth breaking from rule of aligning parameters
after brackets to keep the longest line lengths down.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>

> ---
> v2:
> - Split into 2 patches.
> ---
>  drivers/net/mdio/mdio-mux-mmioreg.c | 45 ++++++++++++-----------------
>  1 file changed, 19 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/net/mdio/mdio-mux-mmioreg.c b/drivers/net/mdio/mdio-mux-mmioreg.c
> index 4d87e61fec7b..08c484ccdcbe 100644
> --- a/drivers/net/mdio/mdio-mux-mmioreg.c
> +++ b/drivers/net/mdio/mdio-mux-mmioreg.c
> @@ -109,30 +109,26 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	ret = of_address_to_resource(np, 0, &res);
> -	if (ret) {
> -		dev_err(&pdev->dev, "could not obtain memory map for node %pOF\n",
> -			np);
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "could not obtain memory map for node %pOF\n", np);
>  	s->phys = res.start;
>  
>  	s->iosize = resource_size(&res);
>  	if (s->iosize != sizeof(uint8_t) &&
>  	    s->iosize != sizeof(uint16_t) &&
>  	    s->iosize != sizeof(uint32_t)) {
> -		dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n");
> -		return -EINVAL;
> +		return dev_err_probe(&pdev->dev, -EINVAL,
> +				     "only 8/16/32-bit registers are supported\n");
>  	}
>  
>  	iprop = of_get_property(np, "mux-mask", &len);
> -	if (!iprop || len != sizeof(uint32_t)) {
> -		dev_err(&pdev->dev, "missing or invalid mux-mask property\n");
> -		return -ENODEV;
> -	}
> -	if (be32_to_cpup(iprop) >= BIT(s->iosize * 8)) {
> -		dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n");
> -		return -EINVAL;
> -	}
> +	if (!iprop || len != sizeof(uint32_t))
> +		return dev_err_probe(&pdev->dev, -ENODEV,
> +				     "missing or invalid mux-mask property\n");
> +	if (be32_to_cpup(iprop) >= BIT(s->iosize * 8))
> +		return dev_err_probe(&pdev->dev, -EINVAL,
> +				     "only 8/16/32-bit registers are supported\n");
>  	s->mask = be32_to_cpup(iprop);
>  
>  	/*
> @@ -142,17 +138,14 @@ static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
>  	for_each_available_child_of_node_scoped(np, np2) {
>  		u64 reg;
>  
> -		if (of_property_read_reg(np2, 0, &reg, NULL)) {
> -			dev_err(&pdev->dev, "mdio-mux child node %pOF is "
> -				"missing a 'reg' property\n", np2);
> -			return -ENODEV;
> -		}
> -		if ((u32)reg & ~s->mask) {
> -			dev_err(&pdev->dev, "mdio-mux child node %pOF has "
> -				"a 'reg' value with unmasked bits\n",
> -				np2);
> -			return -ENODEV;
> -		}
> +		if (of_property_read_reg(np2, 0, &reg, NULL))
> +			return dev_err_probe(&pdev->dev, -ENODEV,
> +					     "mdio-mux child node %pOF is missing a 'reg' property\n",
> +					     np2);
> +		if ((u32)reg & ~s->mask)
> +			return dev_err_probe(&pdev->dev, -ENODEV,
> +					     "mdio-mux child node %pOF has a 'reg' value with unmasked bits\n",
I'd align these super long ones as. 
			     "mdio-mux child node %pOF has a 'reg' value with unmasked bits\n",
It is ugly but then so are > 100 char lines.
> +					     np2);
>  	}
>  
>  	ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node,


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ