| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240902-net-next-mptcp-mib-mpjtx-misc-v1-8-d3e0f3773b90@kernel.org>
Date: Mon, 02 Sep 2024 12:45:59 +0200
From: "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
To: mptcp@...ts.linux.dev, Mat Martineau <martineau@...nel.org>,
Geliang Tang <geliang@...nel.org>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Shuah Khan <shuah@...nel.org>
Cc: netdev@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
Subject: [PATCH net-next 08/11] selftests: mptcp: join: specify host being
checked
Instead of displaying 'invert' when looking at some events like MP_FAIL,
MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are
not traditionnaly sent from one side, the host being checked is now
printed.
For the ADD_ADDR, only display the host when it is the client sending
it, which is more unusual.
Also before, the 'invert' message was printed after a few checks, but it
was not clear which ones exactly.
Reviewed-by: Geliang Tang <geliang@...nel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
---
tools/testing/selftests/net/mptcp/mptcp_join.sh | 89 +++++++++++++------------
1 file changed, 45 insertions(+), 44 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 7993e0e0029e..321197d8977e 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -1180,6 +1180,8 @@ chk_fail_nr()
local count
local ns_tx=$ns1
local ns_rx=$ns2
+ local tx="server"
+ local rx="client"
local extra_msg=""
local allow_tx_lost=0
local allow_rx_lost=0
@@ -1187,7 +1189,8 @@ chk_fail_nr()
if [[ $ns_invert = "invert" ]]; then
ns_tx=$ns2
ns_rx=$ns1
- extra_msg="invert"
+ tx="client"
+ rx="server"
fi
if [[ "${fail_tx}" = "-"* ]]; then
@@ -1199,10 +1202,10 @@ chk_fail_nr()
fail_rx=${fail_rx:1}
fi
- print_check "fail tx"
+ print_check "fail tx ${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx")
if [ -n "$count" ] && [ "$count" != "$fail_tx" ]; then
- extra_msg+=",tx=$count"
+ extra_msg+=" tx=$count"
fi
if [ -z "$count" ]; then
print_skip
@@ -1213,10 +1216,10 @@ chk_fail_nr()
print_ok
fi
- print_check "fail rx"
+ print_check "fail rx ${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx")
if [ -n "$count" ] && [ "$count" != "$fail_rx" ]; then
- extra_msg+=",rx=$count"
+ extra_msg+=" rx=$count"
fi
if [ -z "$count" ]; then
print_skip
@@ -1238,37 +1241,35 @@ chk_fclose_nr()
local count
local ns_tx=$ns2
local ns_rx=$ns1
- local extra_msg=""
+ local tx="client"
+ local rx="server"
if [[ $ns_invert = "invert" ]]; then
ns_tx=$ns1
ns_rx=$ns2
- extra_msg="invert"
+ tx="server"
+ rx="client"
fi
- print_check "fast close tx"
+ print_check "fast close tx ${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$fclose_tx" ]; then
- extra_msg+=",tx=$count"
fail_test "got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
else
print_ok
fi
- print_check "fast close rx"
+ print_check "fast close rx ${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
if [ -z "$count" ]; then
print_skip
elif [ "$count" != "$fclose_rx" ]; then
- extra_msg+=",rx=$count"
fail_test "got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
else
print_ok
fi
-
- print_info "$extra_msg"
}
chk_rst_nr()
@@ -1279,15 +1280,17 @@ chk_rst_nr()
local count
local ns_tx=$ns1
local ns_rx=$ns2
- local extra_msg=""
+ local tx="server"
+ local rx="client"
if [[ $ns_invert = "invert" ]]; then
ns_tx=$ns2
ns_rx=$ns1
- extra_msg="invert"
+ tx="client"
+ rx="server"
fi
- print_check "reset tx"
+ print_check "reset tx ${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPRstTx")
if [ -z "$count" ]; then
print_skip
@@ -1299,7 +1302,7 @@ chk_rst_nr()
print_ok
fi
- print_check "reset rx"
+ print_check "reset rx ${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPRstRx")
if [ -z "$count" ]; then
print_skip
@@ -1310,8 +1313,6 @@ chk_rst_nr()
else
print_ok
fi
-
- print_info "$extra_msg"
}
chk_infi_nr()
@@ -1320,7 +1321,7 @@ chk_infi_nr()
local infi_rx=$2
local count
- print_check "infi tx"
+ print_check "infi tx client"
count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtInfiniteMapTx")
if [ -z "$count" ]; then
print_skip
@@ -1330,7 +1331,7 @@ chk_infi_nr()
print_ok
fi
- print_check "infi rx"
+ print_check "infi rx server"
count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtInfiniteMapRx")
if [ -z "$count" ]; then
print_skip
@@ -1506,19 +1507,21 @@ chk_add_nr()
local mis_ack_nr=0
local ns_tx=$ns1
local ns_rx=$ns2
- local extra_msg=""
+ local tx=""
+ local rx=""
local count
local timeout
if [[ $ns_invert = "invert" ]]; then
ns_tx=$ns2
ns_rx=$ns1
- extra_msg="invert"
+ tx=" client"
+ rx=" server"
fi
timeout=$(ip netns exec ${ns_tx} sysctl -n net.mptcp.add_addr_timeout)
- print_check "add addr rx"
+ print_check "add addr rx${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtAddAddr")
if [ -z "$count" ]; then
print_skip
@@ -1530,7 +1533,7 @@ chk_add_nr()
print_ok
fi
- print_check "add addr echo rx"
+ print_check "add addr echo rx${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtEchoAdd")
if [ -z "$count" ]; then
print_skip
@@ -1541,7 +1544,7 @@ chk_add_nr()
fi
if [ $port_nr -gt 0 ]; then
- print_check "add addr rx with port"
+ print_check "add addr rx with port${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtPortAdd")
if [ -z "$count" ]; then
print_skip
@@ -1551,7 +1554,7 @@ chk_add_nr()
print_ok
fi
- print_check "syn rx port"
+ print_check "syn rx port${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortSynRx")
if [ -z "$count" ]; then
print_skip
@@ -1562,7 +1565,7 @@ chk_add_nr()
print_ok
fi
- print_check "synack rx port"
+ print_check "synack rx port${rx}"
count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPJoinPortSynAckRx")
if [ -z "$count" ]; then
print_skip
@@ -1573,7 +1576,7 @@ chk_add_nr()
print_ok
fi
- print_check "ack rx port"
+ print_check "ack rx port${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortAckRx")
if [ -z "$count" ]; then
print_skip
@@ -1584,7 +1587,7 @@ chk_add_nr()
print_ok
fi
- print_check "syn rx port mismatch"
+ print_check "syn rx port mismatch${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortSynRx")
if [ -z "$count" ]; then
print_skip
@@ -1595,7 +1598,7 @@ chk_add_nr()
print_ok
fi
- print_check "ack rx port mismatch"
+ print_check "ack rx port mismatch${tx}"
count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortAckRx")
if [ -z "$count" ]; then
print_skip
@@ -1606,8 +1609,6 @@ chk_add_nr()
print_ok
fi
fi
-
- print_info "$extra_msg"
}
chk_add_tx_nr()
@@ -1651,6 +1652,8 @@ chk_rm_nr()
local count
local addr_ns=$ns1
local subflow_ns=$ns2
+ local addr="server"
+ local subflow="client"
local extra_msg=""
shift 2
@@ -1660,16 +1663,14 @@ chk_rm_nr()
shift
done
- if [ -z $invert ]; then
- addr_ns=$ns1
- subflow_ns=$ns2
- elif [ $invert = "true" ]; then
+ if [ "$invert" = "true" ]; then
addr_ns=$ns2
subflow_ns=$ns1
- extra_msg="invert"
+ addr="client"
+ subflow="server"
fi
- print_check "rm addr rx"
+ print_check "rm addr rx ${addr}"
count=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmAddr")
if [ -z "$count" ]; then
print_skip
@@ -1679,7 +1680,7 @@ chk_rm_nr()
print_ok
fi
- print_check "rm subflow"
+ print_check "rm subflow ${subflow}"
count=$(mptcp_lib_get_counter ${subflow_ns} "MPTcpExtRmSubflow")
if [ -z "$count" ]; then
print_skip
@@ -1693,7 +1694,7 @@ chk_rm_nr()
count=$((count + cnt))
if [ "$count" != "$rm_subflow_nr" ]; then
suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
- extra_msg+=" simult"
+ extra_msg="simult"
fi
if [ $count -ge "$rm_subflow_nr" ] && \
[ "$count" -le "$((rm_subflow_nr *2 ))" ]; then
@@ -1714,7 +1715,7 @@ chk_rm_tx_nr()
{
local rm_addr_tx_nr=$1
- print_check "rm addr tx"
+ print_check "rm addr tx client"
count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtRmAddrTx")
if [ -z "$count" ]; then
print_skip
@@ -1733,7 +1734,7 @@ chk_prio_nr()
local mpj_syn_ack=$4
local count
- print_check "mp_prio tx"
+ print_check "mp_prio tx server"
count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioTx")
if [ -z "$count" ]; then
print_skip
@@ -1743,7 +1744,7 @@ chk_prio_nr()
print_ok
fi
- print_check "mp_prio rx"
+ print_check "mp_prio rx client"
count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioRx")
if [ -z "$count" ]; then
print_skip
--
2.45.2
Powered by blists - more mailing lists