[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240903-beagleplay_fw_upgrade-v4-1-526fc62204a7@beagleboard.org>
Date: Tue, 03 Sep 2024 15:02:18 +0530
From: Ayush Singh <ayush@...gleboard.org>
To: d-gole@...com, lorforlinux@...gleboard.org, jkridner@...gleboard.org,
robertcnelson@...gleboard.org, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>, Tero Kristo <kristo@...nel.org>,
Johan Hovold <johan@...nel.org>, Alex Elder <elder@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: greybus-dev@...ts.linaro.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Ayush Singh <ayush@...gleboard.org>,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v4 1/3] dt-bindings: net: ti,cc1352p7: Add
bootloader-backdoor-gpios
bootloader-backdoor-gpio (along with reset-gpio) is used to enable
bootloader backdoor for flashing new firmware.
The pin and pin level to enable bootloader backdoor is configured using
the following CCFG variables in cc1352p7:
- SET_CCFG_BL_CONFIG_BL_PIN_NO
- SET_CCFG_BL_CONFIG_BL_LEVEL
Acked-by: Conor Dooley <conor.dooley@...rochip.com>
Acked-by: Rob Herring (Arm) <robh@...nel.org>
Signed-off-by: Ayush Singh <ayush@...gleboard.org>
---
Documentation/devicetree/bindings/net/ti,cc1352p7.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
index 3dde10de4630..4f4253441547 100644
--- a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
@@ -29,6 +29,12 @@ properties:
reset-gpios:
maxItems: 1
+ bootloader-backdoor-gpios:
+ maxItems: 1
+ description: |
+ gpios to enable bootloader backdoor in cc1352p7 bootloader to allow
+ flashing new firmware.
+
vdds-supply: true
required:
@@ -46,6 +52,7 @@ examples:
clocks = <&sclk_hf 0>, <&sclk_lf 25>;
clock-names = "sclk_hf", "sclk_lf";
reset-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ bootloader-backdoor-gpios = <&pio 36 GPIO_ACTIVE_LOW>;
vdds-supply = <&vdds>;
};
};
--
2.46.0
Powered by blists - more mailing lists