lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240904090645.8742-1-Raju.Lakkaraju@microchip.com>
Date: Wed, 4 Sep 2024 14:36:40 +0530
From: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
To: <netdev@...r.kernel.org>
CC: <davem@...emloft.net>, <linux@...linux.org.uk>, <kuba@...nel.org>,
	<andrew@...n.ch>, <hkallweit1@...il.com>, <richardcochran@...il.com>,
	<rdunlap@...radead.org>, <bryan.whitehead@...rochip.com>,
	<edumazet@...gle.com>, <pabeni@...hat.com>, <maxime.chevallier@...tlin.com>,
	<linux-kernel@...r.kernel.org>, <horms@...nel.org>,
	<UNGLinuxDriver@...rochip.com>
Subject: [PATCH net-next V5 0/5] Add support to PHYLINK for LAN743x/PCI11x1x chips

This is the follow-up patch series of
https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html

Divide the PHYLINK adaptation and SFP modifications into two separate patch
series.

The current patch series focuses on transitioning the LAN743x driver's PHY
support from phylib to phylink.

Tested on PCI11010 Rev-1 Evaluation board

Change List:
============
V4 -> V5:
  - Remove the fixed_phy_unregister( ) function. Not require 
  - Remove the "phydev->eee_enabled" check to update the MAC EEE
    enable/disable
  - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer.
  - Add phy_support_eee() to initialize the EEE flags 
V3 -> V4:
  - Add fixed-link patch along with this series. 
    Note: Note: This code was developed by Mr.Russell King
    Ref: 
    https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815
  - Change phylink fixed-link function header's string from "Returns" to
    "Returns:" 
  - Remove the EEE private variable from LAN743x adapter strcture and fix the
    EEE's set/get functions
  - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and
    __RGMII_TXID) replace with phy_interface_set_rgmii( ) function
  - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( )

V2 -> V3:
  - Remove the unwanted parens in each of these if() sub-blocks 
  - Replace "to_net_dev(config->dev)" with "netdev".
  - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces
  - Fix the lan743x_phy_handle_exists( ) return type

V1 -> V2:
  - Fix the Russell King's comments i.e. remove the speed, duplex update in 
    lan743x_phylink_mac_config( )
  - pre-March 2020 legacy support has been removed

V0 -> V1:
  - Integrate with Synopsys DesignWare XPCS drivers
  - Based on external review comments,
  - Changes made to SGMII interface support only 1G/100M/10M bps speed
  - Changes made to 2500Base-X interface support only 2.5Gbps speed
  - Add check for not is_sgmii_en with is_sfp_support_en support
  - Change the "pci11x1x_strap_get_status" function return type from void to
    int
  - Add ethtool phylink wol, eee, pause get/set functions

Raju Lakkaraju (5):
  net: phylink: Add phylink_set_fixed_link() to configure fixed link
    state in phylink
  net: lan743x: Create separate PCS power reset function
  net: lan743x: Create separate Link Speed Duplex state function
  net: lan743x: Migrate phylib to phylink
  net: lan743x: Add support to ethtool phylink get and set settings

 drivers/net/ethernet/microchip/Kconfig        |   5 +-
 .../net/ethernet/microchip/lan743x_ethtool.c  | 119 ++--
 drivers/net/ethernet/microchip/lan743x_main.c | 672 +++++++++++-------
 drivers/net/ethernet/microchip/lan743x_main.h |   4 +
 drivers/net/phy/phylink.c                     |  42 ++
 include/linux/phylink.h                       |   2 +
 6 files changed, 520 insertions(+), 324 deletions(-)

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ