lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240912-feature_poe_power_cap-v1-1-499e3dd996d7@bootlin.com>
Date: Thu, 12 Sep 2024 11:20:02 +0200
From: Kory Maincent <kory.maincent@...tlin.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Andrew Lunn <andrew@...n.ch>, Michal Kubecek <mkubecek@...e.cz>
Cc: Kyle Swenson <kyle.swenson@....tech>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, netdev@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Kory Maincent <kory.maincent@...tlin.com>
Subject: [PATCH ethtool-next 1/3] ethtool: pse-pd: Expand C33 PSE with
 several new features

From: Kory Maincent (Dent Project) <kory.maincent@...tlin.com>

This patch adds support for several new features to the C33 PSE commands:
- Get the Class negotiated between the Powered Device and the PSE
- Get Extended state and substate
- Get the Actual power
- Configure the power limit
- Get the Power limit ranges available

Example:
$ ethtool --set-pse eth1 c33-pse-avail-pw-limit 18000
$ ethtool --show-pse eth1
PSE attributes for eth1:
Clause 33 PSE Admin State: enabled
Clause 33 PSE Power Detection Status: disabled
Clause 33 PSE Extended State: Group of mr_mps_valid states
Clause 33 PSE Extended Substate: Port is not connected
Clause 33 PSE Available Power Limit: 18000
Clause 33 PSE Power Limit Ranges:
	range:
		min 15000
		max 18100
	range:
		min 30000
		max 38000
	range:
		min 60000
		max 65000
	range:
		min 90000
		max 97500

Signed-off-by: Kory Maincent <kory.maincent@...tlin.com>
---

If you think the Power Limit Ranges display does not fit your liking
please do not hesitate to ask for change.
---
 netlink/pse-pd.c | 275 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 275 insertions(+)

diff --git a/netlink/pse-pd.c b/netlink/pse-pd.c
index 3f6b6aa..fd1fc4d 100644
--- a/netlink/pse-pd.c
+++ b/netlink/pse-pd.c
@@ -89,10 +89,226 @@ static const char *c33_pse_pw_d_status_name(u32 val)
 		return "unsupported";
 	}
 }
+
+static const char *c33_pse_ext_state_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION:
+		return "Group of error_condition states";
+	case ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID:
+		return "Group of mr_mps_valid states";
+	case ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE:
+		return "Group of mr_pse_enable states";
+	case ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED:
+		return "Group of option_detect_ted";
+	case ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM:
+		return "Group of option_vport_lim states";
+	case ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED:
+		return "Group of ovld_detected states";
+	case ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE:
+		return "Group of pd_dll_power_type states";
+	case ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE:
+		return "Group of power_not_available states";
+	case ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED:
+		return "Group of short_detected states";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_mr_mps_valid_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD:
+		return "Underload state";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN:
+		return "Port is not connected";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_error_condition_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT:
+		return "Non-existing port number";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT:
+		return "Undefined port";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT:
+		return "Internal hardware fault";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON:
+		return "Communication error after force on";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS:
+		return "Unknown port status";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF:
+		return "Host crash turn off";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN:
+		return "Host crash force shutdown";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE:
+		return "Configuration change";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP:
+		return "Over temperature detected";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_mr_pse_enable_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE:
+		return "Disable pin active";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_option_detect_ted_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS:
+		return "Detection in process";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR:
+		return "Connection check error";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_option_vport_lim_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE:
+		return "Main supply voltage is high";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE:
+		return "Main supply voltage is low";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION:
+		return "Voltage injection into the port";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_ovld_detected_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD:
+		return "Overload state";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_power_not_available_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED:
+		return "Power budget exceeded for the controller";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET:
+		return "Configured port power limit exceeded controller power budget";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT:
+		return "Power request from PD exceeds port limit";
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT:
+		return "Power denied due to Hardware power limit";
+	default:
+		return "unsupported";
+	}
+}
+
+static const char *c33_pse_ext_substate_short_detected_name(u32 val)
+{
+	switch (val) {
+	case ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION:
+		return "Short condition was detected";
+	default:
+		return "unsupported";
+	}
+}
+
+struct c33_pse_ext_substate_desc {
+	u32 state;
+	const char *(*substate_name)(u32 val);
+};
+
+static const struct c33_pse_ext_substate_desc c33_pse_ext_substate_map[] = {
+	{ ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+	  c33_pse_ext_substate_error_condition_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+	  c33_pse_ext_substate_mr_mps_valid_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+	  c33_pse_ext_substate_mr_pse_enable_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+	  c33_pse_ext_substate_option_detect_ted_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+	  c33_pse_ext_substate_option_vport_lim_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+	  c33_pse_ext_substate_ovld_detected_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+	  c33_pse_ext_substate_power_not_available_name },
+	{ ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+	  c33_pse_ext_substate_short_detected_name },
+	{ /* sentinel */ }
+};
+
+static void c33_pse_print_ext_substate(u32 state, u32 substate)
+{
+	const struct c33_pse_ext_substate_desc *substate_map;
+
+	substate_map = c33_pse_ext_substate_map;
+	while (substate_map->state) {
+		if (substate_map->state == state) {
+			print_string(PRINT_ANY, "c33-pse-extended-substate",
+				     "Clause 33 PSE Extended Substate: %s\n",
+				     substate_map->substate_name(substate));
+			return;
+		}
+		substate_map++;
+	}
+}
+
+static int c33_pse_dump_pw_limit_range(const struct nlattr *range)
+{
+	const struct nlattr *range_tb[ETHTOOL_A_C33_PSE_PW_LIMIT_MAX + 1] = {};
+	DECLARE_ATTR_TB_INFO(range_tb);
+	const struct nlattr *attr;
+	u32 min, max;
+	int ret;
+
+	ret = mnl_attr_parse_nested(range, attr_cb, &range_tb_info);
+	if (ret < 0) {
+		fprintf(stderr,
+			"malformed netlink message (power limit range)\n");
+		return 1;
+	}
+
+	attr = range_tb[ETHTOOL_A_C33_PSE_PW_LIMIT_MIN];
+	if (!attr || mnl_attr_validate(attr, MNL_TYPE_U32) < 0) {
+		fprintf(stderr,
+			"malformed netlink message (power limit min)\n");
+		return 1;
+	}
+	min = mnl_attr_get_u32(attr);
+
+	attr = range_tb[ETHTOOL_A_C33_PSE_PW_LIMIT_MAX];
+	if (!attr || mnl_attr_validate(attr, MNL_TYPE_U32) < 0) {
+		fprintf(stderr,
+			"malformed netlink message (power limit max)\n");
+		return 1;
+	}
+	max = mnl_attr_get_u32(attr);
+
+	print_string(PRINT_ANY, "range", "\trange:\n", NULL);
+	print_uint(PRINT_ANY, "min", "\t\tmin %u\n", min);
+	print_uint(PRINT_ANY, "max", "\t\tmax %u\n", max);
+	return 0;
+}
+
 int pse_reply_cb(const struct nlmsghdr *nlhdr, void *data)
 {
 	const struct nlattr *tb[ETHTOOL_A_PSE_MAX + 1] = {};
 	struct nl_context *nlctx = data;
+	const struct nlattr *attr;
 	DECLARE_ATTR_TB_INFO(tb);
 	bool silent;
 	int err_ret;
@@ -151,6 +367,59 @@ int pse_reply_cb(const struct nlmsghdr *nlhdr, void *data)
 			     c33_pse_pw_d_status_name(val));
 	}
 
+	if (tb[ETHTOOL_A_C33_PSE_EXT_STATE]) {
+		u32 val;
+
+		val = mnl_attr_get_u32(tb[ETHTOOL_A_C33_PSE_EXT_STATE]);
+		print_string(PRINT_ANY, "c33-pse-extended-state",
+			     "Clause 33 PSE Extended State: %s\n",
+			     c33_pse_ext_state_name(val));
+
+		if (tb[ETHTOOL_A_C33_PSE_EXT_SUBSTATE]) {
+			u32 substate;
+
+			substate = mnl_attr_get_u32(tb[ETHTOOL_A_C33_PSE_EXT_SUBSTATE]);
+			c33_pse_print_ext_substate(val, substate);
+		}
+	}
+
+	if (tb[ETHTOOL_A_C33_PSE_PW_CLASS]) {
+		u32 val;
+
+		val = mnl_attr_get_u32(tb[ETHTOOL_A_C33_PSE_PW_CLASS]);
+		print_uint(PRINT_ANY, "c33-pse-power-class",
+			   "Clause 33 PSE Power Class: %u\n", val);
+	}
+
+	if (tb[ETHTOOL_A_C33_PSE_ACTUAL_PW]) {
+		u32 val;
+
+		val = mnl_attr_get_u32(tb[ETHTOOL_A_C33_PSE_ACTUAL_PW]);
+		print_uint(PRINT_ANY, "c33-pse-actual-power",
+			   "Clause 33 PSE Actual Power: %u\n", val);
+	}
+
+	if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
+		u32 val;
+
+		val = mnl_attr_get_u32(tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]);
+		print_uint(PRINT_ANY, "c33-pse-available-power-limit",
+			   "Clause 33 PSE Available Power Limit: %u\n", val);
+	}
+
+	if (tb[ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES]) {
+		print_string(PRINT_ANY, "c33-pse-power-limit-ranges",
+			     "Clause 33 PSE Power Limit Ranges:\n", NULL);
+		mnl_attr_for_each(attr, nlhdr, GENL_HDRLEN) {
+			if (mnl_attr_get_type(attr) == ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES) {
+				if (c33_pse_dump_pw_limit_range(attr)) {
+					close_json_object();
+					return err_ret;
+				}
+			}
+		}
+	}
+
 	close_json_object();
 
 	return MNL_CB_OK;
@@ -212,6 +481,12 @@ static const struct param_parser spse_params[] = {
 		.handler_data	= c33_pse_admin_control_values,
 		.min_argc	= 1,
 	},
+	{
+		.arg		= "c33-pse-avail-pw-limit",
+		.type		= ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT,
+		.handler	= nl_parse_direct_u32,
+		.min_argc	= 1,
+	},
 	{}
 };
 

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ