| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <D2DCF9E2F70EDC93+20240912025539.1928223-3-wangyuli@uniontech.com>
Date: Thu, 12 Sep 2024 10:55:07 +0800
From: WangYuli <wangyuli@...ontech.com>
To: stable@...r.kernel.org,
gregkh@...uxfoundation.org,
sashal@...nel.org,
william.qiu@...rfivetech.com,
emil.renner.berthing@...onical.com,
conor.dooley@...rochip.com,
wangyuli@...ontech.com,
xingyu.wu@...rfivetech.com,
walker.chen@...rfivetech.com,
robh@...nel.org,
hal.feng@...rfivetech.com
Cc: kernel@...il.dk,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
paul.walmsley@...ive.com,
palmer@...belt.com,
aou@...s.berkeley.edu,
devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org,
richardcochran@...il.com,
netdev@...r.kernel.org
Subject: [PATCH 6.6 v2 3/4] riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1
From: Xingyu Wu <xingyu.wu@...rfivetech.com>
[ Upstream commit 92cfc35838b2a4006abb9e3bafc291b56f135d01 ]
Add I2Srx/I2Stx0/I2Stx1 nodes and pins configuration for the
StarFive JH7110 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
Reviewed-by: Walker Chen <walker.chen@...rfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
Signed-off-by: WangYuli <wangyuli@...ontech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 58 +++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 65 +++++++++++++++++++
2 files changed, 123 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 4874e3bb42ab..caa59b9b2f19 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -202,6 +202,24 @@ &i2c6 {
status = "okay";
};
+&i2srx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2srx_pins>;
+ status = "okay";
+};
+
+&i2stx0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mclk_ext_pins>;
+ status = "okay";
+};
+
+&i2stx1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2stx1_pins>;
+ status = "okay";
+};
+
&mmc0 {
max-frequency = <100000000>;
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
@@ -340,6 +358,46 @@ GPOEN_SYS_I2C6_DATA,
};
};
+ i2srx_pins: i2srx-0 {
+ clk-sd-pins {
+ pinmux = <GPIOMUX(38, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_BCLK)>,
+ <GPIOMUX(63, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_LRCK)>,
+ <GPIOMUX(38, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2STX1_BCLK)>,
+ <GPIOMUX(63, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2STX1_LRCK)>,
+ <GPIOMUX(61, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_SDIN0)>;
+ input-enable;
+ };
+ };
+
+ i2stx1_pins: i2stx1-0 {
+ sd-pins {
+ pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ };
+ };
+
+ mclk_ext_pins: mclk-ext-0 {
+ mclk-ext-pins {
+ pinmux = <GPIOMUX(4, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_MCLK_EXT)>;
+ input-enable;
+ };
+ };
+
mmc0_pins: mmc0-0 {
rst-pins {
pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index e85464c328d0..621b68c02ea8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -512,6 +512,30 @@ tdm: tdm@...90000 {
status = "disabled";
};
+ i2srx: i2s@...e0000 {
+ compatible = "starfive,jh7110-i2srx";
+ reg = <0x0 0x100e0000 0x0 0x1000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2SRX_BCLK_MST>,
+ <&syscrg JH7110_SYSCLK_I2SRX_APB>,
+ <&syscrg JH7110_SYSCLK_MCLK>,
+ <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+ <&mclk_ext>,
+ <&syscrg JH7110_SYSCLK_I2SRX_BCLK>,
+ <&syscrg JH7110_SYSCLK_I2SRX_LRCK>,
+ <&i2srx_bclk_ext>,
+ <&i2srx_lrck_ext>;
+ clock-names = "i2sclk", "apb", "mclk",
+ "mclk_inner", "mclk_ext", "bclk",
+ "lrck", "bclk_ext", "lrck_ext";
+ resets = <&syscrg JH7110_SYSRST_I2SRX_APB>,
+ <&syscrg JH7110_SYSRST_I2SRX_BCLK>;
+ dmas = <0>, <&dma 24>;
+ dma-names = "tx", "rx";
+ starfive,syscon = <&sys_syscon 0x18 0x2>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
usb0: usb@...00000 {
compatible = "starfive,jh7110-usb";
ranges = <0x0 0x0 0x10100000 0x100000>;
@@ -736,6 +760,47 @@ spi6: spi@...a0000 {
status = "disabled";
};
+ i2stx0: i2s@...b0000 {
+ compatible = "starfive,jh7110-i2stx0";
+ reg = <0x0 0x120b0000 0x0 0x1000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2STX0_BCLK_MST>,
+ <&syscrg JH7110_SYSCLK_I2STX0_APB>,
+ <&syscrg JH7110_SYSCLK_MCLK>,
+ <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+ <&mclk_ext>;
+ clock-names = "i2sclk", "apb", "mclk",
+ "mclk_inner","mclk_ext";
+ resets = <&syscrg JH7110_SYSRST_I2STX0_APB>,
+ <&syscrg JH7110_SYSRST_I2STX0_BCLK>;
+ dmas = <&dma 47>;
+ dma-names = "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2stx1: i2s@...c0000 {
+ compatible = "starfive,jh7110-i2stx1";
+ reg = <0x0 0x120c0000 0x0 0x1000>;
+ clocks = <&syscrg JH7110_SYSCLK_I2STX1_BCLK_MST>,
+ <&syscrg JH7110_SYSCLK_I2STX1_APB>,
+ <&syscrg JH7110_SYSCLK_MCLK>,
+ <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+ <&mclk_ext>,
+ <&syscrg JH7110_SYSCLK_I2STX1_BCLK>,
+ <&syscrg JH7110_SYSCLK_I2STX1_LRCK>,
+ <&i2stx_bclk_ext>,
+ <&i2stx_lrck_ext>;
+ clock-names = "i2sclk", "apb", "mclk",
+ "mclk_inner", "mclk_ext", "bclk",
+ "lrck", "bclk_ext", "lrck_ext";
+ resets = <&syscrg JH7110_SYSRST_I2STX1_APB>,
+ <&syscrg JH7110_SYSRST_I2STX1_BCLK>;
+ dmas = <&dma 48>;
+ dma-names = "tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
sfctemp: temperature-sensor@...e0000 {
compatible = "starfive,jh7110-temp";
reg = <0x0 0x120e0000 0x0 0x10000>;
--
2.43.4
Powered by blists - more mailing lists