| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<DM6PR11MB4236AE79E97B4CBBA1A9812F83622@DM6PR11MB4236.namprd11.prod.outlook.com>
Date: Wed, 18 Sep 2024 10:30:28 +0000
From: <Mohan.Prasad@...rochip.com>
To: <andrew@...n.ch>
CC: <netdev@...r.kernel.org>, <davem@...emloft.net>, <kuba@...nel.org>,
<edumazet@...gle.com>, <pabeni@...hat.com>, <shuah@...nel.org>,
<linux-kernel@...r.kernel.org>, <linux-kselftest@...r.kernel.org>,
<horms@...nel.org>, <brett.creeley@....com>, <rosenp@...il.com>,
<UNGLinuxDriver@...rochip.com>, <willemb@...gle.com>
Subject: RE: [PATCH net-next v2 1/3] selftests: nic_basic_tests: Add selftest
file for basic tests of NIC
Hello Andrew,
Thanks for the review comments.
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> On Tue, Sep 17, 2024 at 08:04:07AM +0530, Mohan Prasad J wrote:
> > Add selftest file to test basic features of a NIC driver.
> > Tests for link modes, auto-negotiation are placed.
> > Selftest makes use of ksft modules and ethtool.
> > Add selftest file in the Makefile.
>
> Thanks for reworking this.
>
> > +++ b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py
> > @@ -0,0 +1,145 @@
> > +#!/usr/bin/env python3
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +#Introduction:
> > +#This file has basic tests for generic NIC drivers.
> > +#The test comprises of auto-negotiation, speed and duplex checks.
> > +#Also has tests to check the throughput #
> > +#Setup:
> > +#Connect the DUT PC with NIC card to partner pc back via ethernet
> > +medium of your choice(RJ45, T1) #
> > +# DUT PC Partner PC
> > +#┌───────────────────────┐
> ┌──────────────────────────┐
> > +#│ │ │ │
> > +#│ │ │ │
> > +#│ ┌───────────┐ │ │
> > +#│ │DUT NIC │ Eth │ │
> > +#│ │Interface ─┼─────────────────────────┼─ any eth
> Interface │
> > +#│ └───────────┘ │ │
> > +#│ │ │ │
> > +#│ │ │ │
> > +#└───────────────────────┘
> └──────────────────────────┘
> > +#
> > +#Configurations:
> > +# Change the below configuration based on your hw needs.
> > +# """Default values"""
> > +sleep_time = 5 #time taken to wait for transitions to happen, in seconds.
> > +test_duration = 5 #performance test duration for the throughput check, in
> seconds.
> > +throughput_threshold = 0.8 #percentage of throughput required to pass
> > +the throughput
> > +
> > +import time
> > +import os
> > +import re
> > +import configparser
> > +import json
> > +from lib.py import ksft_run, ksft_exit, ksft_pr, ksft_eq from lib.py
> > +import KsftFailEx, KsftSkipEx from lib.py import NetDrvEpEnv from
> > +lib.py import cmd from lib.py import ethtool
> > +
> > +"""Global variables"""
> > +common_link_modes = []
> > +
> > +def get_ethtool_content(ifname: str, field: str):
> > + capture = False
> > + content = []
> > +
> > + """Get the ethtool content for the interface"""
> > + process = ethtool(f"{ifname}")
> > + if process.ret != 0:
> > + raise KsftSkipEx(f"Error while getting the ethtool content for interface
> {ifname}")
> > + lines = process.stdout.splitlines()
> > +
> > + """Retrieve the content of the field"""
> > + for line in lines:
> > + if field in line:
> > + capture = True
> > + data = line.split(":")[1].strip()
> > + content.extend(data.split())
> > + continue
>
> Since you have batteries included python:
>
> ethtool --json enp2s0
> [sudo] password for andrew:
> [ {
> "ifname": "enp2s0",
> "supported-ports": [ "TP","MII" ],
> "supported-link-modes": [
> "10baseT/Half","10baseT/Full","100baseT/Half","100baseT/Full","1000baseT/
> Full" ],
> "supported-pause-frame-use": "Symmetric Receive-only",
> "supports-auto-negotiation": true,
> "supported-fec-modes": [ ],
> "advertised-link-modes": [
> "10baseT/Half","10baseT/Full","100baseT/Half","100baseT/Full","1000baseT/
> Full" ],
> "advertised-pause-frame-use": "Symmetric Receive-only",
> "advertised-auto-negotiation": true,
> "advertised-fec-modes": [ ],
> "auto-negotiation": false,
> "master-slave-cfg": "preferred slave",
> "master-slave-status": "unknown",
> "port": "Twisted Pair",
> "phyad": 0,
> "transceiver": "external",
> "supports-wake-on": "pumbg",
> "wake-on": "d",
> "link-detected": false
> } ]
>
> You can use a json library to do all the parsing for you.
I tried running the --json option with the ethtool ("ethtool --json enp9s0"), however I am not getting the above output.
Instead it always throws "ethtool: bad command line argument(s)"
I am figuring out what might be missing (or any suggestions would be helpful).
>
> > +def get_speed_duplex(content):
> > + speed = []
> > + duplex = []
> > + """Check the link modes"""
> > + for data in content:
> > + parts = data.split('/')
> > + speed_value = re.match(r'\d+', parts[0])
> > + if speed_value:
> > + speed.append(speed_value.group())
> > + else:
> > + raise KsftSkipEx(f"No speed value found for interface {ifname}")
> > + duplex.append(parts[1].lower())
> > + return speed, duplex
> > +
> > +def verify_link_up(ifname: str) -> None:
> > + """Verify whether the link is up"""
> > + with open(f"/sys/class/net/{ifname}/operstate", "r") as fp:
> > + link_state = fp.read().strip()
> > +
> > + if link_state == "down":
> > + raise KsftSkipEx(f"Link state of interface {ifname} is DOWN")
> > +
> > +def set_autonegotiation_state(ifname: str, state: str) -> None:
> > + content = get_ethtool_content(ifname, "Supported link modes:")
> > + speeds, duplex_modes = get_speed_duplex(content)
> > + speed = speeds[0]
> > + duplex = duplex_modes[0]
> > + if not speed or not duplex:
> > + KsftSkipEx("No speed or duplex modes found")
> > + """Set the autonegotiation state for the interface"""
> > + process = ethtool(f"-s {ifname} speed {speed} duplex {duplex} autoneg
> {state}")
> > + if process.ret != 0:
> > + raise KsftFailEx(f"Not able to set autoneg parameter for {ifname}")
> > + ksft_pr(f"Autoneg set as {state} for {ifname}")
> > +
> > +def verify_autonegotiation(ifname: str, expected_state: str) -> None:
> > + verify_link_up(ifname)
> > + """Verifying the autonegotiation state"""
> > + output = get_ethtool_content(ifname, "Auto-negotiation:")
> > + actual_state = output[0]
> > +
> > + ksft_eq(actual_state, expected_state)
> > +
> > +def test_link_modes(cfg) -> None:
> > + global common_link_modes
> > + link_modes = get_ethtool_content(cfg.ifname, "Supported link modes:")
> > + partner_link_modes = get_ethtool_content(cfg.ifname, "Link
> > +partner advertised link modes:")
> > +
> > + if link_modes and partner_link_modes:
> > + for idx1 in range(len(link_modes)):
> > + for idx2 in range(len(partner_link_modes)):
> > + if link_modes[idx1] == partner_link_modes[idx2]:
> > + common_link_modes.append(link_modes[idx1])
> > + break
> > + else:
> > + raise KsftFailEx("No link modes available")
> > +
> > +def test_autonegotiation(cfg) -> None:
> > + autoneg = get_ethtool_content(cfg.ifname, "Supports auto-
> negotiation:")
> > + if autoneg[0] == "Yes":
> > + for state in ["off", "on"]:
> > + set_autonegotiation_state(cfg.ifname, state)
> > + time.sleep(sleep_time)
>
> One thing you could do here is look at "advertised-link-modes". You would
> expect it to list a single mode, matching the speed/duplex you requested.
I will change it in the next version.
Powered by blists - more mailing lists