[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0a9830fe-790d-4ccd-bec9-3fbb32f18aa8@gmail.com>
Date: Mon, 23 Sep 2024 11:21:23 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: Aleksander Jan Bajkowski <olek2@...pl>, davem@...emloft.net,
edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com,
jacob.e.keller@...el.com, andrew@...n.ch, horms@...nel.org,
john@...ozen.org, ralph.hempel@...tiq.com, ralf@...ux-mips.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net v2 1/1] net: ethernet: lantiq_etop: fix memory
disclosure
On 9/21/24 03:58, Aleksander Jan Bajkowski wrote:
> When applying padding, the buffer is not zeroed, which results in memory
> disclosure. The mentioned data is observed on the wire. This patch uses
> skb_put_padto() to pad Ethernet frames properly. The mentioned function
> zeroes the expanded buffer.
>
> In case the packet cannot be padded it is silently dropped. Statistics
> are also not incremented. This driver does not support statistics in the
> old 32-bit format or the new 64-bit format. These will be added in the
> future. In its current form, the patch should be easily backported to
> stable versions.
>
> Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
> in hardware, so software padding must be applied.
>
> Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
> Signed-off-by: Aleksander Jan Bajkowski <olek2@...pl>
> ---
> drivers/net/ethernet/lantiq_etop.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
> index 3c289bfe0a09..36f1e3c93ca5 100644
> --- a/drivers/net/ethernet/lantiq_etop.c
> +++ b/drivers/net/ethernet/lantiq_etop.c
> @@ -477,11 +477,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
> struct ltq_etop_priv *priv = netdev_priv(dev);
> struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
> struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
> - int len;
> unsigned long flags;
> u32 byte_offset;
>
> - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
> + if (skb_put_padto(skb, ETH_ZLEN))
> + return NETDEV_TX_OK;
You should consider continuing to use the temporary variable 'len' here,
and just re-assign it after the call to skb_put_padto() and avoid
introducing potential user-after-free near the point where you program
the buffer length into the HW. This also minimizes the amount of lines
to review.
--
Florian
Powered by blists - more mailing lists