[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6qk7fmbbvi5m3evyriyq4txswuzckbg4lmdbdkyidiedxhzye5@av3gw7vweimu>
Date: Tue, 24 Sep 2024 08:08:08 +0200
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Marc Kleine-Budde <mkl@...gutronix.de>, Vincent Mailhol <mailhol.vincent@...adoo.fr>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Martin Hundebøll <martin@...nix.com>, "Felipe Balbi (Intel)" <balbi@...nel.org>,
Raymond Tan <raymond.tan@...el.com>, Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
linux-can@...r.kernel.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux@...tq-group.com
Subject: Re: [PATCH v3 2/2] can: m_can: fix missed interrupts with m_can_pci
On Mon, Sep 23, 2024 at 05:32:16PM GMT, Matthias Schiffer wrote:
> The interrupt line of PCI devices is interpreted as edge-triggered,
> however the interrupt signal of the m_can controller integrated in Intel
> Elkhart Lake CPUs appears to be generated level-triggered.
>
> Consider the following sequence of events:
>
> - IR register is read, interrupt X is set
> - A new interrupt Y is triggered in the m_can controller
> - IR register is written to acknowledge interrupt X. Y remains set in IR
>
> As at no point in this sequence no interrupt flag is set in IR, the
> m_can interrupt line will never become deasserted, and no edge will ever
> be observed to trigger another run of the ISR. This was observed to
> result in the TX queue of the EHL m_can to get stuck under high load,
> because frames were queued to the hardware in m_can_start_xmit(), but
> m_can_finish_tx() was never run to account for their successful
> transmission.
>
> To fix the issue, repeatedly read and acknowledge interrupts at the
> start of the ISR until no interrupt flags are set, so the next incoming
> interrupt will also result in an edge on the interrupt line.
>
> Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Just a few comment nitpicks below. Otherwise:
Reviewed-by: Markus Schneider-Pargmann <msp@...libre.com>
> ---
>
> v2: introduce flag is_edge_triggered, so we can avoid the loop on !m_can_pci
> v3:
> - rename flag to irq_edge_triggered
> - update comment to describe the issue more generically as one of systems with
> edge-triggered interrupt line. m_can_pci is mentioned as an example, as it
> is the only m_can variant that currently sets the irq_edge_triggered flag.
>
> drivers/net/can/m_can/m_can.c | 22 +++++++++++++++++-----
> drivers/net/can/m_can/m_can.h | 1 +
> drivers/net/can/m_can/m_can_pci.c | 1 +
> 3 files changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index c85ac1b15f723..24e348f677714 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1207,20 +1207,32 @@ static void m_can_coalescing_update(struct m_can_classdev *cdev, u32 ir)
> static int m_can_interrupt_handler(struct m_can_classdev *cdev)
> {
> struct net_device *dev = cdev->net;
> - u32 ir;
> + u32 ir = 0, ir_read;
> int ret;
>
> if (pm_runtime_suspended(cdev->dev))
> return IRQ_NONE;
>
> - ir = m_can_read(cdev, M_CAN_IR);
> + /* The m_can controller signals its interrupt status as a level, but
> + * depending in the integration the CPU may interpret the signal as
^ on?
> + * edge-triggered (for example with m_can_pci).
> + * We must observe that IR is 0 at least once to be sure that the next
As the loop has a break for non edge-triggered chips, I think you should
include that in the comment, like 'For these edge-triggered
integrations, we must observe...' or something similar.
Best
Markus
> + * interrupt will generate an edge.
> + */
> + while ((ir_read = m_can_read(cdev, M_CAN_IR)) != 0) {
> + ir |= ir_read;
> +
> + /* ACK all irqs */
> + m_can_write(cdev, M_CAN_IR, ir);
> +
> + if (!cdev->irq_edge_triggered)
> + break;
> + }
> +
> m_can_coalescing_update(cdev, ir);
> if (!ir)
> return IRQ_NONE;
>
> - /* ACK all irqs */
> - m_can_write(cdev, M_CAN_IR, ir);
> -
> if (cdev->ops->clear_interrupts)
> cdev->ops->clear_interrupts(cdev);
>
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> index 92b2bd8628e6b..ef39e8e527ab6 100644
> --- a/drivers/net/can/m_can/m_can.h
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -99,6 +99,7 @@ struct m_can_classdev {
> int pm_clock_support;
> int pm_wake_source;
> int is_peripheral;
> + bool irq_edge_triggered;
>
> // Cached M_CAN_IE register content
> u32 active_interrupts;
> diff --git a/drivers/net/can/m_can/m_can_pci.c b/drivers/net/can/m_can/m_can_pci.c
> index d72fe771dfc7a..9ad7419f88f83 100644
> --- a/drivers/net/can/m_can/m_can_pci.c
> +++ b/drivers/net/can/m_can/m_can_pci.c
> @@ -127,6 +127,7 @@ static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
> mcan_class->pm_clock_support = 1;
> mcan_class->pm_wake_source = 0;
> mcan_class->can.clock.freq = id->driver_data;
> + mcan_class->irq_edge_triggered = true;
> mcan_class->ops = &m_can_pci_ops;
>
> pci_set_drvdata(pci, mcan_class);
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
Powered by blists - more mailing lists