netdev - [PATCH net v2] net: dsa: lan9303: ensure chip reset and wait for READY status

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241002171230.1502325-1-alexander.sverdlin@siemens.com>
Date: Wed,  2 Oct 2024 19:12:28 +0200
From: "A. Sverdlin" <alexander.sverdlin@...mens.com>
To: netdev@...r.kernel.org
Cc: Anatolij Gustschin <agust@...x.de>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	Alexander Sverdlin <alexander.sverdlin@...mens.com>
Subject: [PATCH net v2] net: dsa: lan9303: ensure chip reset and wait for READY status

From: Anatolij Gustschin <agust@...x.de>

Accessing device registers seems to be not reliable, the chip
revision is sometimes detected wrongly (0 instead of expected 1).

Ensure that the chip reset is performed via reset GPIO and then
wait for 'Device Ready' status in HW_CFG register before doing
any register initializations.

Signed-off-by: Anatolij Gustschin <agust@...x.de>
[alex: reworked using read_poll_timeout()]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@...mens.com>
---
Changelog:
v2: use read_poll_timeout()

 drivers/net/dsa/lan9303-core.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 268949939636a..3155ec1ab2517 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
+#include <linux/iopoll.h>
 #include <linux/mutex.h>
 #include <linux/mii.h>
 #include <linux/of.h>
@@ -839,6 +840,8 @@ static void lan9303_handle_reset(struct lan9303 *chip)
 	if (!chip->reset_gpio)
 		return;
 
+	gpiod_set_value_cansleep(chip->reset_gpio, 1);
+
 	if (chip->reset_duration != 0)
 		msleep(chip->reset_duration);
 
@@ -866,6 +869,29 @@ static int lan9303_check_device(struct lan9303 *chip)
 	int ret;
 	u32 reg;
 
+	/*
+	 * In I2C-managed configurations this polling loop will clash with
+	 * switch's reading of EEPROM right after reset and this behaviour is
+	 * not configurable. While lan9303_read() already has quite long retry
+	 * timeout, seems not all cases are being detected as arbitration error.
+	 *
+	 * According to datasheet, EEPROM loader has 30ms timeout (in case of
+	 * missing EEPROM).
+	 *
+	 * Loading of the largest supported EEPROM is expected to take at least
+	 * 5.9s.
+	 */
+	if (read_poll_timeout(lan9303_read, ret, reg & LAN9303_HW_CFG_READY,
+			      20000, 6000000, false,
+			      chip->regmap, LAN9303_HW_CFG, &reg)) {
+		dev_err(chip->dev, "HW_CFG not ready: 0x%08x\n", reg);
+		return -ENODEV;
+	}
+	if (ret) {
+		dev_err(chip->dev, "failed to read HW_CFG reg: %d\n", ret);
+		return ret;
+	}
+
 	ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, &reg);
 	if (ret) {
 		dev_err(chip->dev, "failed to read chip revision register: %d\n",
-- 
2.46.2