netdev - [PATCH 1/1] net: phy: marvell: avoid bringing down fibre link when autoneg is bypassed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241003022512.370600-1-qingtao.cao@digi.com>
Date: Thu,  3 Oct 2024 12:25:12 +1000
From: Qingtao Cao <qingtao.cao.au@...il.com>
To: 
Cc: qingtao.cao.au@...il.com,
	Qingtao Cao <qingtao.cao@...i.com>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 1/1] net: phy: marvell: avoid bringing down fibre link when autoneg is bypassed

On 88E151x the SGMII autoneg bypass mode defaults to be enabled. When it is
activated, the device assumes a link-up status with existing configuration
in BMCR, avoid bringing down the fibre link in this case

Test case:
1. Two 88E151x connected with SFP, both enable autoneg, link is up with speed
   1000M
2. Disable autoneg on one device and explicitly set its speed to 1000M
3. The fibre link can still up with this change, otherwise not.

Signed-off-by: Qingtao Cao <qingtao.cao@...i.com>
---
 drivers/net/phy/marvell.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 9964bf3dea2f..535c6e679ff7 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -195,6 +195,10 @@
 
 #define MII_88E1510_MSCR_2		0x15
 
+#define MII_88E1510_FSCR2		0x1a
+#define MII_88E1510_FSCR2_BYPASS_ENABLE	(1<<6)
+#define MII_88E1510_FSCR2_BYPASS_STATUS	(1<<5)
+
 #define MII_VCT5_TX_RX_MDI0_COUPLING	0x10
 #define MII_VCT5_TX_RX_MDI1_COUPLING	0x11
 #define MII_VCT5_TX_RX_MDI2_COUPLING	0x12
@@ -1625,9 +1629,26 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
 {
 	int lpa;
 	int err;
+	int fscr2;
 
 	if (!(status & MII_M1011_PHY_STATUS_RESOLVED)) {
-		phydev->link = 0;
+		if (!fiber) {
+			phydev->link = 0;
+		} else {
+			fscr2 = phy_read(phydev, MII_88E1510_FSCR2);
+			if (fscr2 > 0) {
+				if ((fscr2 & MII_88E1510_FSCR2_BYPASS_ENABLE) &&
+				    (fscr2 & MII_88E1510_FSCR2_BYPASS_STATUS)) {
+					if (genphy_read_status_fixed(phydev) < 0)
+						phydev->link = 0;
+				} else {
+					phydev->link = 0;
+				}
+			} else {
+				phydev->link = 0;
+			}
+		}
+
 		return 0;
 	}
 
-- 
2.34.1