netdev - [PATCH RFC net-next] net: phy: always set polarity

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <473d62f268f2a317fd81d0f38f15d2f2f98e2451.1728056697.git.daniel@makrotopia.org>
Date: Fri, 4 Oct 2024 16:46:33 +0100
From: Daniel Golle <daniel@...rotopia.org>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Christian Marangi <ansuelsmth@...il.com>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH RFC net-next] net: phy: always set polarity_modes if op is
 supported

Some PHYs drive LEDs active-low by default and polarity needs to be
configured in case the 'active-low' property is NOT set.
One way to achieve this without introducing an additional 'active-high'
property would be to always call the led_polarity_set operation if it
is supported by the phy driver.

Signed-off-by: Daniel Golle <daniel@...rotopia.org>
---
 drivers/net/phy/phy_device.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 560e338b307a..d25c61223e83 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3362,11 +3362,11 @@ static int of_phy_led(struct phy_device *phydev,
 	if (of_property_read_bool(led, "inactive-high-impedance"))
 		set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes);
 
-	if (modes) {
-		/* Return error if asked to set polarity modes but not supported */
-		if (!phydev->drv->led_polarity_set)
-			return -EINVAL;
+	/* Return error if asked to set polarity modes but not supported */
+	if (modes && !phydev->drv->led_polarity_set)
+		return -EINVAL;
 
+	if (phydev->drv->led_polarity_set) {
 		err = phydev->drv->led_polarity_set(phydev, index, modes);
 		if (err)
 			return err;
-- 
2.46.2