| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241004161601.2932901-8-maxime.chevallier@bootlin.com>
Date: Fri, 4 Oct 2024 18:15:57 +0200
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
thomas.petazzoni@...tlin.com,
Andrew Lunn <andrew@...n.ch>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Herve Codina <herve.codina@...tlin.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Vladimir Oltean <vladimir.oltean@....com>,
Marek Behún <kabel@...nel.org>,
Köry Maincent <kory.maincent@...tlin.com>,
Oleksij Rempel <o.rempel@...gutronix.de>
Subject: [PATCH net-next v2 7/9] net: phy: introduce ethtool_phy_ops to get and set phy configuration
Expose phy-specific configuration hooks to get and set the state of an
ethernet PHY's internal configuration.
So far, these parameters only include the isolation state of the PHY.
The .get_config() ethtool_phy_ops gets these status information from the
phy_device's internal flags, while the .set_config() operation allows
changing these configuration parameters.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
V2 : Dropped loopback mode
drivers/net/phy/phy.c | 44 ++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy_device.c | 2 ++
include/linux/ethtool.h | 8 +++++++
include/linux/phy.h | 19 ++++++++++++++++
4 files changed, 73 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 4f3e742907cb..5a689da060d1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1811,3 +1811,47 @@ int phy_ethtool_nway_reset(struct net_device *ndev)
return ret;
}
EXPORT_SYMBOL(phy_ethtool_nway_reset);
+
+/**
+ * phy_get_config - Get PHY configuration parameters
+ * @phydev: the PHY device to act upon
+ * @phy_cfg: The configuration to apply
+ */
+
+int phy_get_config(struct phy_device *phydev,
+ struct phy_device_config *phy_cfg)
+{
+ mutex_lock(&phydev->lock);
+ phy_cfg->isolate = phydev->isolated;
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+/**
+ * phy_set_config - Set PHY configuration parameters
+ * @phydev: the PHY device to act upon
+ * @phy_cfg: the configuration to apply
+ * @extack: a netlink extack for useful error reporting
+ */
+
+int phy_set_config(struct phy_device *phydev,
+ const struct phy_device_config *phy_cfg,
+ struct netlink_ext_ack *extack)
+{
+ bool isolate_change;
+ int ret;
+
+ mutex_lock(&phydev->lock);
+ isolate_change = (phy_cfg->isolate != phydev->isolated);
+ mutex_unlock(&phydev->lock);
+
+ if (!isolate_change)
+ return 0;
+
+ ret = phy_isolate(phydev, phy_cfg->isolate);
+ if (ret)
+ NL_SET_ERR_MSG(extack, "Error while configuring PHY isolation");
+
+ return ret;
+}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9294b73c391a..1111a3cbcb02 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3857,6 +3857,8 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
.get_plca_status = phy_ethtool_get_plca_status,
.start_cable_test = phy_start_cable_test,
.start_cable_test_tdr = phy_start_cable_test_tdr,
+ .get_config = phy_get_config,
+ .set_config = phy_set_config,
};
static const struct phylib_stubs __phylib_stubs = {
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 12f6dc567598..480ee99a69a5 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1140,6 +1140,7 @@ struct phy_device;
struct phy_tdr_config;
struct phy_plca_cfg;
struct phy_plca_status;
+struct phy_device_config;
/**
* struct ethtool_phy_ops - Optional PHY device options
@@ -1151,6 +1152,8 @@ struct phy_plca_status;
* @get_plca_status: Get PLCA configuration.
* @start_cable_test: Start a cable test
* @start_cable_test_tdr: Start a Time Domain Reflectometry cable test
+ * @get_config: Retrieve phy device configuration parameters
+ * @set_config: Set phy device configuration parameters
*
* All operations are optional (i.e. the function pointer may be set to %NULL)
* and callers must take this into account. Callers must hold the RTNL lock.
@@ -1172,6 +1175,11 @@ struct ethtool_phy_ops {
int (*start_cable_test_tdr)(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_tdr_config *config);
+ int (*get_config)(struct phy_device *phydev,
+ struct phy_device_config *phy_cfg);
+ int (*set_config)(struct phy_device *phydev,
+ const struct phy_device_config *phy_cfg,
+ struct netlink_ext_ack *extack);
};
/**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e43f7169c57d..662ba57cd0de 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -886,6 +886,20 @@ enum phy_led_modes {
__PHY_LED_MODES_NUM,
};
+/**
+ * struct phy_device_config - General PHY device configuration parameters for
+ * status reporting and bulk configuration
+ *
+ * A structure containing generic PHY device information, allowing to expose
+ * internal status to userspace, and perform PHY configuration in a controlled
+ * manner.
+ *
+ * @isolate: The MII-side isolation status of the PHY
+ */
+struct phy_device_config {
+ bool isolate;
+};
+
/**
* struct phy_led: An LED driven by the PHY
*
@@ -2085,6 +2099,11 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
struct netlink_ext_ack *extack);
int phy_ethtool_get_plca_status(struct phy_device *phydev,
struct phy_plca_status *plca_st);
+int phy_get_config(struct phy_device *phydev,
+ struct phy_device_config *phy_cfg);
+int phy_set_config(struct phy_device *phydev,
+ const struct phy_device_config *phy_cfg,
+ struct netlink_ext_ack *extack);
int __phy_hwtstamp_get(struct phy_device *phydev,
struct kernel_hwtstamp_config *config);
--
2.46.1
Powered by blists - more mailing lists